target/linux/ramips/dts/DAP-1350.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dap-1350", "ralink,rt3052-soc";
  10         model = "D-Link DAP-1350";
  11
  12         aliases {
  13                 led-boot = &led_power_blue;
  14                 led-failsafe = &led_power_blue;
  15                 led-running = &led_power_blue;
  16                 led-upgrade = &led_power_blue;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         cfi@1f000000 {
  24                 compatible = "cfi-flash";
  25                 reg = <0x1f000000 0x800000>;
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28
  29                 partitions {
  30                         compatible = "fixed-partitions";
  31                         #address-cells = <1>;
  32                         #size-cells = <1>;
  33
  34                         partition@0 {
  35                                 label = "u-boot";
  36                                 reg = <0x0 0x30000>;
  37                                 read-only;
  38                         };
  39
  40                         devdata: partition@30000 {
  41                                 label = "devdata";
  42                                 reg = <0x30000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@40000 {
  47                                 label = "devconf";
  48                                 reg = <0x40000 0x30000>;
  49                                 read-only;
  50                         };
  51
  52                         partition@70000 {
  53                                 label = "devlang";
  54                                 reg = <0x70000 0x40000>;
  55                                 read-only;
  56                         };
  57
  58                         partition@b0000 {
  59                                 label = "firmware";
  60                                 reg = <0xb0000 0x750000>;
  61                         };
  62                 };
  63         };
  64
  65         gpio-leds {
  66                 compatible = "gpio-leds";
  67
  68                 led_power_blue: power {
  69                         label = "dap-1350:blue:power";
  70                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 power2 {
  74                         label = "dap-1350:red:power";
  75                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 wps {
  79                         label = "dap-1350:blue:wps";
  80                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83
  84         gpio-keys-polled {
  85                 compatible = "gpio-keys-polled";
  86                 poll-interval = <20>;
  87
  88                 reset {
  89                         label = "reset";
  90                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  91                         linux,code = <KEY_RESTART>;
  92                 };
  93
  94                 wps {
  95                         label = "wps";
  96                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_WPS_BUTTON>;
  98                 };
  99
 100                 rt {
 101                         label = "rt";
 102                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 103                         linux,code = <BTN_0>;
 104                 };
 105
 106                 ap {
 107                         label = "ap";
 108                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 109                         linux,code = <BTN_1>;
 110                 };
 111         };
 112 };
 113
 114 &pinctrl {
 115         state_default: pinctrl0 {
 116                 gpio {
 117                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 118                         ralink,function = "gpio";
 119                 };
 120         };
 121 };
 122
 123 &ethernet {
 124         mtd-mac-address = <&devdata 0x2e>;
 125 };
 126
 127 &esw {
 128         mediatek,portmap = <0x2f>;
 129 };
 130
 131 &wmac {
 132         ralink,mtd-eeprom = <&devdata 0>;
 133 };
 134
 135 &otg {
 136         status = "okay";
 137 };