ramips: fix DIR-602D1 flash size
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-620-D1.dts
1 /dts-v1/;
2
3 /include/ "rt3352.dtsi"
4
5 / {
6 compatible = "DIR-620-D1", "ralink,rt3352-soc";
7 model = "D-Link DIR-620 D1";
8
9 palmbus@10000000 {
10 sysc@0 {
11 ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
12 ralink,gpiomux = "jtag";
13 ralink,uartmux = "gpio";
14 ralink,wdtmux = <1>;
15 };
16
17 gpio0: gpio@600 {
18 status = "okay";
19 };
20
21 spi@b00 {
22 status = "okay";
23 m25p80@0 {
24 #address-cells = <1>;
25 #size-cells = <1>;
26 compatible = "mx25l6405d";
27 reg = <0 0>;
28 linux,modalias = "m25p80", "mx25l6405d";
29 spi-max-frequency = <10000000>;
30
31 partition@0 {
32 label = "u-boot";
33 reg = <0x0 0x30000>;
34 read-only;
35 };
36
37 partition@30000 {
38 label = "u-boot-env";
39 reg = <0x30000 0x10000>;
40 read-only;
41 };
42
43 factory: partition@40000 {
44 label = "factory";
45 reg = <0x40000 0x10000>;
46 read-only;
47 };
48
49 partition@50000 {
50 label = "firmware";
51 reg = <0x50000 0x7b0000>;
52 };
53 };
54 };
55 };
56
57 ethernet@10100000 {
58 status = "okay";
59 };
60
61 esw@10110000 {
62 status = "okay";
63 ralink,portmap = <0x2f>;
64 };
65
66 gpio-leds {
67 compatible = "gpio-leds";
68 status {
69 label = "d-link:green:status";
70 gpios = <&gpio0 9 1>;
71 };
72 wifi {
73 label = "d-link:green:wifi";
74 gpios = <&gpio0 17 1>;
75 };
76 };
77
78 gpio-keys-polled {
79 compatible = "gpio-keys-polled";
80 #address-cells = <1>;
81 #size-cells = <0>;
82 poll-interval = <20>;
83 reset_wps {
84 label = "reset_wps";
85 gpios = <&gpio0 7 1>;
86 linux,code = <0x198>;
87 };
88 };
89
90 wmac@10180000 {
91 status = "okay";
92 };
93
94 ehci@101c0000 {
95 status = "okay";
96 };
97
98 ohci@101c1000 {
99 status = "okay";
100 };
101 };