target/linux/ramips/dts/ESR-9753.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ESR-9753", "ralink,rt3052-soc";
   7         model = "Senao / EnGenius ESR-9753";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@50000 {
  50                         label = "firmware";
  51                         reg = <0x50000 0x3b0000>;
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57                 power {
  58                         label = "esr-9753:orange:power";
  59                         gpios = <&gpio0 8 1>;
  60                 };
  61                 wps {
  62                         label = "esr-9753:orange:wps";
  63                         gpios = <&gpio0 14 1>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 poll-interval = <20>;
  72                 reset {
  73                         label = "reset";
  74                         gpios = <&gpio0 10 1>;
  75                         linux,code = <0x198>;
  76                 };
  77                 wps {
  78                         label = "wps";
  79                         gpios = <&gpio0 0 1>;
  80                         linux,code = <0x211>;
  81                 };
  82         };
  83
  84         ethernet@10100000 {
  85                 status = "okay";
  86         };
  87
  88         esw@10110000 {
  89                 status = "okay";
  90                 ralink,portmap = <0x3e>;
  91         };
  92
  93         wmac@10180000 {
  94                 status = "okay";
  95         };
  96 };