ramips: DTS rework
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / HG255D.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 / {
6 compatible = "HG255D", "ralink,rt3052-soc";
7 model = "HuaWei HG255D";
8
9 cfi@1f000000 {
10 compatible = "cfi-flash";
11 reg = <0x1f000000 0x1000000>;
12 bank-width = <2>;
13 device-width = <2>;
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 partition@0 {
18 label = "u-boot";
19 reg = <0x0 0x40000>;
20 read-only;
21 };
22
23 partition@30000 {
24 label = "u-boot-env";
25 reg = <0x40000 0x20000>;
26 read-only;
27 };
28
29 factory: partition@60000 {
30 label = "factory";
31 reg = <0x60000 0x20000>;
32 read-only;
33 };
34
35 partition@80000 {
36 label = "firmware";
37 reg = <0x80000 0xf60000>;
38 };
39
40 partition@fa0000 {
41 label = "factory-orig";
42 reg = <0xfa0000 0x20000>;
43 read-only;
44 };
45 };
46
47 gpio-leds {
48 compatible = "gpio-leds";
49
50 power {
51 label = "hg255d:green:power";
52 gpios = <&gpio0 8 1>;
53 };
54
55 internet {
56 label = "hg255d:green:internet";
57 gpios = <&gpio0 13 1>;
58 };
59
60 wifi {
61 label = "hg255d:green:wlan";
62 gpios = <&gpio0 14 1>;
63 };
64
65 usb {
66 label = "hg255d:green:usb";
67 gpios = <&gpio0 9 1>;
68 };
69
70 wps {
71 label = "hg255d:green:wps";
72 gpios = <&gpio0 12 1>;
73 };
74
75 voice {
76 label = "hg255d:green:voice";
77 gpios = <&gpio0 5 1>;
78 };
79 };
80
81 gpio-keys-polled {
82 compatible = "gpio-keys-polled";
83 #address-cells = <1>;
84 #size-cells = <0>;
85 poll-interval = <10>;
86
87 reset {
88 label = "reset";
89 gpios = <&gpio0 4 1>;
90 linux,code = <0x198>;
91 };
92
93 wps {
94 label = "wps";
95 gpios = <&gpio0 10 1>;
96 linux,code = <0x211>;
97 };
98
99 rfkill {
100 label = "rfkill";
101 gpios = <&gpio0 0 1>;
102 linux,code = <0xf7>;
103 };
104 };
105 };
106
107 &pinctrl {
108 state_default: pinctrl0 {
109 gpio {
110 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
111 ralink,function = "gpio";
112 };
113 };
114 };
115
116 &ethernet {
117 mtd-mac-address = <&factory 0x28>;
118 };
119
120 &esw {
121 mediatek,portmap = <0x2f>;
122 };
123
124 &wmac {
125 ralink,mtd-eeprom = <&factory 0>;
126 };
127
128 &otg {
129 status = "okay";
130 };