ramips: update device tree source files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / HW550-3G.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
10 model = "Aztech HW550-3G";
11
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
25
26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
31
32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
37
38 partition@50000 {
39 label = "firmware";
40 reg = <0x50000 0x7b0000>;
41 };
42 };
43
44 gpio-leds {
45 compatible = "gpio-leds";
46
47 usb {
48 label = "hw550-3g:green:usb";
49 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
50 };
51
52 3g {
53 label = "hw550-3g:green:3g";
54 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
55 };
56
57 status {
58 label = "hw550-3g:green:status";
59 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
60 };
61
62 wps {
63 label = "hw550-3g:green:wps";
64 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
65 };
66 };
67
68 gpio-keys-polled {
69 compatible = "gpio-keys-polled";
70 #address-cells = <1>;
71 #size-cells = <0>;
72 poll-interval = <20>;
73
74 reset {
75 label = "reset";
76 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
77 linux,code = <KEY_RESTART>;
78 };
79
80 connect {
81 label = "connect";
82 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_CONNECT>;
84 };
85
86 wps {
87 label = "wps";
88 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_WPS_BUTTON>;
90 };
91 };
92 };
93
94 &pinctrl {
95 state_default: pinctrl0 {
96 gpio {
97 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
98 ralink,function = "gpio";
99 };
100 };
101 };
102
103 &ethernet {
104 mtd-mac-address = <&factory 0x28>;
105 };
106
107 &esw {
108 mediatek,portmap = <0x3e>;
109 };
110
111 &wmac {
112 ralink,mtd-eeprom = <&factory 0>;
113 };
114
115 &otg {
116 status = "okay";
117 };