target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "intenso,memory2move", "ralink,rt5350-soc";
  10         model = "Intenso Memory 2 Move";
  11
  12         aliases {
  13                 led-status = &led_wifi;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_wifi: wifi {
  24                         label = "m2m:blue:wifi";
  25                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 wan {
  29                         label = "m2m:green:wan";
  30                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  31                 };
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 poll-interval = <20>;
  37
  38                 power {
  39                         label = "power";
  40                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_POWER>;
  42                 };
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 spi-max-frequency = <10000000>;
  59
  60                 partitions {
  61                         compatible = "fixed-partitions";
  62                         #address-cells = <1>;
  63                         #size-cells = <1>;
  64
  65                         partition@0 {
  66                                 label = "Bootloader";
  67                                 reg = <0x0 0x30000>;
  68                                 read-only;
  69                         };
  70
  71                         partition@30000 {
  72                                 label = "Config";
  73                                 reg = <0x30000 0x10000>;
  74                                 read-only;
  75                         };
  76
  77                         factory: partition@40000 {
  78                                 label = "Factory";
  79                                 reg = <0x40000 0x10000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@50000 {
  84                                 label = "firmware";
  85                                 reg = <0x50000 0x7b0000>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &pinctrl {
  92         state_default: pinctrl0 {
  93                 gpio {
  94                         ralink,group = "i2c", "uartf";
  95                         ralink,function = "gpio";
  96                 };
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0x28>;
 102 };
 103
 104 &esw {
 105         mediatek,portmap = <0x2f>;
 106 };
 107
 108 &ehci {
 109         status = "okay";
 110 };
 111
 112 &ohci {
 113         status = "okay";
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0x0>;
 118 };