fix typo that made gpiomuxing fail
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / MOFI3500-3GN.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 #address-cells = <1>;
7 #size-cells = <1>;
8 compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
9 model = "MoFi Network MOFI3500-3GN";
10
11 memorydetect {
12 ralink,memory = <0x0 0x200000 0x4000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
17 };
18
19 palmbus@10000000 {
20 sysc@0 {
21 ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
22 ralink,gpiomux = "mdio";
23 ralink,uartmux = "gpio";
24 ralink,wdtmux = <1>;
25 };
26
27 gpio0: gpio@600 {
28 status = "okay";
29 };
30
31 };
32
33 cfi@1f000000 {
34 compatible = "cfi-flash";
35 reg = <0x1f000000 0x800000>;
36
37 bank-width = <2>;
38 device-width = <2>;
39 #address-cells = <1>;
40 #size-cells = <1>;
41 };
42
43 ethernet@10100000 {
44 status = "okay";
45 };
46
47 esw@10110000 {
48 status = "okay";
49 ralink,portmap = <0x2f>;
50 };
51
52 gpio-leds {
53 compatible = "gpio-leds";
54 usb {
55 label = "mofi3500-3gn:green:usb";
56 gpios = <&gpio0 8 1>;
57 };
58 3g {
59 label = "mofi3500-3gn:green:3g";
60 gpios = <&gpio0 11 1>;
61 };
62 status {
63 label = "mofi3500-3gn:green:status";
64 gpios = <&gpio0 12 1>;
65 };
66 wps {
67 label = "mofi3500-3gn:green:wps";
68 gpios = <&gpio0 14 1>;
69 };
70 };
71
72 gpio-keys-polled {
73 compatible = "gpio-keys-polled";
74 #address-cells = <1>;
75 #size-cells = <0>;
76 poll-interval = <20>;
77 reset {
78 label = "reset";
79 gpios = <&gpio0 10 1>;
80 linux,code = <0x198>;
81 };
82 connect {
83 label = "connect";
84 gpios = <&gpio0 7 1>;
85 linux,code = <0xda>;
86 };
87 wps {
88 label = "wps";
89 gpios = <&gpio0 0 1>;
90 linux,code = <0x211>;
91 };
92 };
93
94 wmac@10180000 {
95 status = "okay";
96 };
97
98 otg@101c0000 {
99 status = "okay";
100 };
101 };