target/linux/ramips/dts/MZK-EX750NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
  10         model = "Planex MZK-EX750NP";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "mzk-ex750np:red:power";
  21                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wifi {
  25                         label = "mzk-ex750np:red:wifi";
  26                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wps {
  30                         label = "mzk-ex750np:green:wps";
  31                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 rep {
  35                         label = "mzk-ex750np:blue:rep";
  36                         gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wifi1 {
  40                         label = "mzk-ex750np:blue:wifi1";
  41                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wifi2 {
  45                         label = "mzk-ex750np:blue:wifi2";
  46                         gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wifi3 {
  50                         label = "mzk-ex750np:blue:wifi3";
  51                         gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
  52                 };
  53         };
  54
  55         gpio-keys-polled {
  56                 compatible = "gpio-keys-polled";
  57                 poll-interval = <20>;
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64
  65                 wps {
  66                         label = "wps";
  67                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  68                         linux,code = <KEY_RFKILL>;
  69                 };
  70         };
  71 };
  72
  73 &gpio2 {
  74         status = "okay";
  75 };
  76
  77 &gpio3 {
  78         status = "okay";
  79 };
  80
  81 &spi0 {
  82         status = "okay";
  83
  84         m25p80@0 {
  85                 compatible = "jedec,spi-nor";
  86                 reg = <0>;
  87                 spi-max-frequency = <10000000>;
  88
  89                 partitions {
  90                         compatible = "fixed-partitions";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93
  94                         partition@0 {
  95                                 label = "u-boot";
  96                                 reg = <0x0 0x30000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@30000 {
 101                                 label = "u-boot-env";
 102                                 reg = <0x30000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         factory: partition@40000 {
 107                                 label = "factory";
 108                                 reg = <0x40000 0x10000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@50000 {
 113                                 label = "firmware";
 114                                 reg = <0x50000 0x730000>;
 115                         };
 116
 117                         partition@780000 {
 118                                 label = "Udata";
 119                                 reg = <0x780000 0x80000>;
 120                         };
 121                 };
 122         };
 123 };
 124
 125 &pinctrl {
 126         state_default: pinctrl0 {
 127                 gpio {
 128                         ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
 129                         ralink,function = "gpio";
 130                 };
 131         };
 132 };
 133
 134 &ethernet {
 135         pinctrl-names = "default";
 136         pinctrl-0 = <&ephy_pins>;
 137         mtd-mac-address = <&factory 0x4>;
 138         mediatek,portmap = "llllw";
 139 };
 140
 141 &wmac {
 142         ralink,mtd-eeprom = <&factory 0>;
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147 };
 148
 149 &pcie0 {
 150         mt76@0,0 {
 151                 reg = <0x0000 0 0 0 0>;
 152                 mediatek,mtd-eeprom = <&factory 0x8000>;
 153         };
 154 };