target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   7         model = "Planex MZK-W300NH2";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@3e0000 {
  46                         label = "cimage";
  47                         reg = <0x3e0000 0x20000>;
  48                         read-only;
  49                 };
  50
  51                 partition@50000 {
  52                         label = "firmware";
  53                         reg = <0x50000 0x390000>;
  54                 };
  55         };
  56
  57         esw@10110000 {
  58                 ralink,portmap = <0x2f>;
  59         };
  60
  61         gpio-leds {
  62                 compatible = "gpio-leds";
  63                 power {
  64                         label = "mzkw300nh2:green:power";
  65                         gpios = <&gpio0 9 1>;
  66                 };
  67                 wlan {
  68                         label = "mzkw300nh2:amber:wlan";
  69                         gpios = <&gpio0 14 1>;
  70                 };
  71                 wps {
  72                         label = "mzkw300nh2:amber:wps";
  73                         gpios = <&gpio0 11 1>;
  74                 };
  75         };
  76
  77         gpio-keys-polled {
  78                 compatible = "gpio-keys-polled";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81                 poll-interval = <20>;
  82                 wps {
  83                         label = "wps";
  84                         gpios = <&gpio0 12 1>;
  85                         linux,code = <0x211>;
  86                 };
  87                 reset {
  88                         label = "reset";
  89                         gpios = <&gpio0 0 1>;
  90                         linux,code = <0x198>;
  91                 };
  92                 rt {
  93                         label = "rt";
  94                         gpios = <&gpio0 13 1>;
  95                         linux,code = <0x100>;
  96                 };
  97         };
  98 };