target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   7         model = "Planex MZK-W300NH2";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii";
  16                         ralink,gpiomux = "i2c", "spi", "jtag";
  17                         ralink,uartmux = "gpio";
  18                         ralink,wdtmux = <1>;
  19                 };
  20
  21                 gpio0: gpio@600 {
  22                         status = "okay";
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@3e0000 {
  54                         label = "cimage";
  55                         reg = <0x3e0000 0x20000>;
  56                         read-only;
  57                 };
  58
  59                 partition@50000 {
  60                         label = "firmware";
  61                         reg = <0x50000 0x390000>;
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 status = "okay";
  67         };
  68
  69         esw@10110000 {
  70                 status = "okay";
  71                 ralink,portmap = <0x2f>;
  72         };
  73
  74         gpio-leds {
  75                 compatible = "gpio-leds";
  76                 power {
  77                         label = "mzkw300nh2:green:power";
  78                         gpios = <&gpio0 9 1>;
  79                 };
  80                 wlan {
  81                         label = "mzkw300nh2:amber:wlan";
  82                         gpios = <&gpio0 14 1>;
  83                 };
  84                 wps {
  85                         label = "mzkw300nh2:amber:wps";
  86                         gpios = <&gpio0 11 1>;
  87                 };
  88         };
  89
  90         gpio-keys-polled {
  91                 compatible = "gpio-keys-polled";
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94                 poll-interval = <20>;
  95                 wps {
  96                         label = "wps";
  97                         gpios = <&gpio0 12 1>;
  98                         linux,code = <0x211>;
  99                 };
 100                 reset {
 101                         label = "reset";
 102                         gpios = <&gpio0 0 1>;
 103                         linux,code = <0x198>;
 104                 };
 105                 rt {
 106                         label = "rt";
 107                         gpios = <&gpio0 13 1>;
 108                         linux,code = <0x100>;
 109                 };
 110         };
 111
 112         wmac@10180000 {
 113                 status = "okay";
 114         };
 115 };