target/linux/ramips/dts/R6120.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
  10         model = "Netgear R6120";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys-polled";
  26                 poll-interval = <20>;
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 lan {
  39                         label = "r6120:green:lan";
  40                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 led_power: power {
  44                         label = "r6120:green:power";
  45                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wlan {
  49                         label = "r6120:green:wlan2g";
  50                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wlan_orange {
  54                         label = "r6120:orange:wlan2g";
  55                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wan {
  59                         label = "r6120:green:wan";
  60                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wan_orange {
  64                         label = "r6120:orange:wan";
  65                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         usb-regulator {
  70                 compatible = "regulator-fixed";
  71
  72                 regulator-name = "USB-power";
  73                 gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  74                 regulator-min-microvolt = <5000000>;
  75                 regulator-max-microvolt = <5000000>;
  76                 enable-active-high;
  77
  78                 regulator-always-on;
  79         };
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "p0led_an", "p1led_an", "p2led_an",
  86                                        "p3led_an", "p4led_an", "wdt",
  87                                        "wled_an", "uart1";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };
  92
  93 &spi0 {
  94         status = "okay";
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <10000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x0 0x40000>;
 109                                 read-only;
 110                         };
 111
 112                         factory: partition@40000 {
 113                                 label = "factory";
 114                                 reg = <0x40000 0x20000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@60000 {
 119                                 label = "nvram";
 120                                 reg = <0x60000 0x30000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@90000 {
 125                                 compatible = "denx,uimage";
 126                                 label = "firmware";
 127                                 reg = <0x90000 0xf60000>;
 128                         };
 129
 130                         partition@ff0000 {
 131                                 label = "reserved";
 132                                 reg = <0xff0000 0x10000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &wmac {
 140         status = "okay";
 141         mtd-mac-address = <&factory 0x4>;
 142         mediatek,mtd-eeprom = <&factory 0x0>;
 143 };
 144
 145 &ethernet {
 146         mtd-mac-address = <&factory 0x4>;
 147 };
 148
 149 &pcie {
 150         status = "okay";
 151 };
 152
 153 &pcie0 {
 154         wifi@0,0 {
 155                 reg = <0x0000 0 0 0 0>;
 156                 mediatek,mtd-eeprom = <&factory 0x8000>;
 157                 ieee80211-freq-limit = <5000000 6000000>;
 158                 mtd-mac-address = <&factory 0x4>;
 159                 mtd-mac-address-increment = <(2)>;
 160         };
 161 };