target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
  10         model = "Asus RT-N10+";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "devdata";
  28                         reg = <0x30000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 devconf: partition@40000 {
  33                         label = "devconf";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x3b0000>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 wps {
  48                         label = "rt-n10-plus:green:wps";
  49                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  50                 };
  51         };
  52
  53         gpio-keys-polled {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <20>;
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64
  65                 wps {
  66                         label = "wps";
  67                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                 };
  70         };
  71 };
  72
  73 &ethernet {
  74         mtd-mac-address = <&devconf 0x4>;
  75 };
  76
  77 &esw {
  78         mediatek,portmap = <0x3e>;
  79 };
  80
  81 &wmac {
  82         ralink,mtd-eeprom = <&devconf 0>;
  83 };