target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
  10         model = "Asus RT-N10+";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "devdata";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         devconf: partition@40000 {
  43                                 label = "devconf";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 label = "firmware";
  50                                 reg = <0x50000 0x3b0000>;
  51                         };
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57
  58                 led_wps: wps {
  59                         label = "rt-n10-plus:green:wps";
  60                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         gpio-keys-polled {
  65                 compatible = "gpio-keys-polled";
  66                 poll-interval = <20>;
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                 };
  79         };
  80 };
  81
  82 &ethernet {
  83         mtd-mac-address = <&devconf 0x4>;
  84 };
  85
  86 &esw {
  87         mediatek,portmap = <0x3e>;
  88 };
  89
  90 &wmac {
  91         ralink,mtd-eeprom = <&devconf 0>;
  92 };