target/linux/ramips/dts/RT-N14U.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
  10         model = "Asus RT-N14U";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 wan {
  16                         label = "rt-n14u:blue:wan";
  17                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 lan {
  21                         label = "rt-n14u:blue:lan";
  22                         gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 usb {
  26                         label = "rt-n14u:blue:usb";
  27                         gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 power {
  31                         label = "rt-n14u:blue:power";
  32                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 air {
  36                         label = "rt-n14u:blue:air";
  37                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         gpio-keys-polled {
  42                 compatible = "gpio-keys-polled";
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45                 poll-interval = <20>;
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 wps {
  54                         label = "wps";
  55                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_WPS_BUTTON>;
  57                 };
  58         };
  59 };
  60
  61 &gpio2 {
  62         status = "okay";
  63 };
  64
  65 &gpio3 {
  66         status = "okay";
  67 };
  68
  69 &spi0 {
  70         status = "okay";
  71
  72         m25p80@0 {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75                 compatible = "jedec,spi-nor";
  76                 reg = <0>;
  77                 spi-max-frequency = <10000000>;
  78
  79                 partition@0 {
  80                         label = "u-boot";
  81                         reg = <0x0 0x30000>;
  82                         read-only;
  83                 };
  84
  85                 partition@30000 {
  86                         label = "u-boot-env";
  87                         reg = <0x30000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 factory: partition@40000 {
  92                         label = "factory";
  93                         reg = <0x40000 0x10000>;
  94                         read-only;
  95                 };
  96
  97                 partition@50000 {
  98                         label = "firmware";
  99                         reg = <0x50000 0xfb0000>;
 100                 };
 101         };
 102 };
 103
 104 &ehci {
 105         status = "okay";
 106 };
 107
 108 &ohci {
 109         status = "okay";
 110 };
 111
 112 &ethernet {
 113         mtd-mac-address = <&factory 0x4>;
 114         mediatek,portmap = "wllll";
 115 };
 116
 117 &wmac {
 118         ralink,mtd-eeprom = <&factory 0>;
 119 };
 120
 121 &pinctrl {
 122         state_default: pinctrl0 {
 123                 default {
 124                         ralink,group = "ephy", "wled", "i2c";
 125                         ralink,function = "gpio";
 126                 };
 127         };
 128 };