target/linux/ramips/dts/SL-R7205.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "skyline,sl-r7205", "ralink,rt3052-soc";
  10         model = "Skyline SL-R7205 Wireless 3G Router";
  11
  12         aliases {
  13                 led-status = &led_wifi;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 label = "firmware";
  47                                 reg = <0x50000 0x3b0000>;
  48                         };
  49                 };
  50         };
  51
  52         gpio-leds {
  53                 compatible = "gpio-leds";
  54
  55                 led_wifi: wifi {
  56                         label = "sl-r7205:green:wifi";
  57                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         gpio-keys-polled {
  62                 compatible = "gpio-keys-polled";
  63                 poll-interval = <20>;
  64
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_RESTART>;
  69                 };
  70
  71                 wps {
  72                         label = "wps";
  73                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  74                         linux,code = <KEY_WPS_BUTTON>;
  75                 };
  76         };
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&factory 0x4>;
  90 };
  91
  92 &esw {
  93         mediatek,portmap = <0x3e>;
  94 };
  95
  96 &wmac {
  97         ralink,mtd-eeprom = <&factory 0>;
  98 };
  99
 100 &otg {
 101         status = "okay";
 102 };