ramips: fix power LED DTB for wt3020
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / TEW-691GR.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
10 model = "TRENDnet TEW-691GR";
11
12 aliases {
13 led-status = &led_wps;
14 };
15
16 nor-flash@1c000000 {
17 compatible = "cfi-flash";
18 reg = <0x1c000000 0x800000>;
19 bank-width = <2>;
20
21 partitions {
22 compatible = "fixed-partitions";
23 #address-cells = <1>;
24 #size-cells = <1>;
25
26 partition@0 {
27 reg = <0x0 0x0030000>;
28 label = "u-boot";
29 read-only;
30 };
31
32 partition@30000 {
33 reg = <0x00030000 0x00010000>;
34 label = "u-boot-env";
35 read-only;
36 };
37
38 factory: partition@40000 {
39 reg = <0x00040000 0x00010000>;
40 label = "factory";
41 read-only;
42 };
43
44 partition@50000 {
45 reg = <0x00050000 0x007b0000>;
46 label = "firmware";
47 };
48 };
49 };
50
51 gpio-keys-polled {
52 compatible = "gpio-keys-polled";
53 poll-interval = <100>;
54
55 reset {
56 label = "reset";
57 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_RESTART>;
59 };
60
61 wps {
62 label = "wps";
63 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_WPS_BUTTON>;
65 };
66
67 rfkill {
68 label = "rfkill";
69 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_RFKILL>;
71 };
72 };
73
74 gpio-leds {
75 compatible = "gpio-leds";
76
77 led_wps: wps {
78 label = "tew-691gr:green:wps";
79 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
80 };
81 };
82 };
83
84 &gpio1 {
85 status = "okay";
86 };
87
88 &pinctrl {
89 state_default: pinctrl0 {
90 gpio {
91 ralink,group = "spi", "i2c", "jtag", "uartf";
92 ralink,function = "gpio";
93 };
94 };
95 };
96
97 &ethernet {
98 mtd-mac-address = <&factory 0x4>;
99
100 port@0 {
101 phy-handle = <&phy0>;
102 phy-mode = "rgmii";
103 };
104
105 mdio-bus {
106 status = "okay";
107
108 phy0: ethernet-phy@0 {
109 reg = <0>;
110 phy-mode = "rgmii";
111 };
112 };
113 };
114
115 &wmac {
116 status = "okay";
117 ralink,mtd-eeprom = <&factory 0x0>;
118 ralink,5ghz = <0>;
119 mtd-mac-address = <&factory 0x4>;
120 mtd-mac-address-increment = <1>;
121 };