target/linux/ramips/dts/UR-336UN.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "upvel,ur-336un", "ralink,rt3052-soc";
  10         model = "UPVEL UR-336UN";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 compatible = "denx,uimage";
  50                                 label = "firmware";
  51                                 reg = <0x50000 0x7b0000>;
  52                         };
  53                 };
  54         };
  55
  56         gpio-leds {
  57                 compatible = "gpio-leds";
  58
  59                 3g {
  60                         label = "ur-336un:green:3g";
  61                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 gateway {
  65                         label = "ur-336un:green:gateway";
  66                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 ap {
  70                         label = "ur-336un:green:ap";
  71                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 led_wps: wps {
  75                         label = "ur-336un:green:wps";
  76                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 station {
  80                         label = "ur-336un:green:station";
  81                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         gpio-keys-polled {
  86                 compatible = "gpio-keys-polled";
  87                 poll-interval = <20>;
  88
  89                 reset_wps {
  90                         label = "reset_wps";
  91                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_RESTART>;
  93                 };
  94
  95                 mode {
  96                         label = "mode";
  97                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  98                         linux,code = <BTN_0>;
  99                 };
 100         };
 101 };
 102
 103 &pinctrl {
 104         state_default: pinctrl0 {
 105                 gpio {
 106                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 107                         ralink,function = "gpio";
 108                 };
 109         };
 110 };
 111
 112 &ethernet {
 113         mtd-mac-address = <&factory 0x4004>;
 114 };
 115
 116 &esw {
 117         mediatek,portmap = <0x2f>;
 118 };
 119
 120 &wmac {
 121         ralink,mtd-eeprom = <&factory 0>;
 122 };
 123
 124 &otg {
 125         status = "okay";
 126 };