target/linux/ramips/dts/WCR-1166DS.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
  10         model = "Buffalo WCR-1166DS";
  11
  12         gpio-keys-polled {
  13                 compatible = "gpio-keys-polled";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17
  18                 aoss {
  19                         label = "aoss";
  20                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_WPS_BUTTON>;
  22                 };
  23
  24                 ap {
  25                         label = "ap";
  26                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  27                         linux,code = <BTN_0>;
  28                         linux,input-type = <EV_SW>;
  29                 };
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36         };
  37
  38         gpio-leds {
  39                 compatible = "gpio-leds";
  40
  41                 router_o {
  42                         label = "wcr-1166ds:orange:router";
  43                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 router_g {
  47                         label = "wcr-1166ds:green:router";
  48                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 internet_o {
  52                         label = "wcr-1166ds:orange:internet";
  53                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 internet_g {
  57                         label = "wcr-1166ds:green:internet";
  58                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wireless_o {
  62                         label = "wcr-1166ds:orange:wireless";
  63                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wireless_g {
  67                         label = "wcr-1166ds:green:wireless";
  68                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 diag {
  72                         label = "wcr-1166ds:orange:diag";
  73                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 power {
  77                         label = "wcr-1166ds:green:power";
  78                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81 };
  82
  83 &ehci {
  84         status = "disabled";
  85 };
  86
  87 &esw {
  88         mediatek,portmap = <0x2f>;
  89         mediatek,portdisable = <0x27>;
  90 };
  91
  92 &ohci {
  93         status = "disabled";
  94 };
  95
  96 &pcie {
  97         status = "okay";
  98         pcie-bridge {
  99                 mt76@0,0 {
 100                         reg = <0x0000 0 0 0 0>;
 101                         device_type = "pci";
 102                         mediatek,mtd-eeprom = <&factory 0x8000>;
 103                         ieee80211-freq-limit = <5000000 6000000>;
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
 112                         ralink,function = "gpio";
 113                 };
 114         };
 115 };
 116
 117 &spi0 {
 118         status = "okay";
 119
 120         m25p80@0 {
 121                 #address-cells = <1>;
 122                 #size-cells = <1>;
 123                 compatible = "jedec,spi-nor";
 124                 reg = <0>;
 125                 spi-max-frequency = <10000000>;
 126                 m25p,chunked-io = <32>;
 127
 128                 partition@0 {
 129                         label = "u-boot";
 130                         reg = <0x0 0x30000>;
 131                         read-only;
 132                 };
 133
 134                 partition@30000 {
 135                         label = "u-boot-env";
 136                         reg = <0x30000 0x10000>;
 137                         read-only;
 138                 };
 139
 140                 factory: partition@40000 {
 141                         label = "factory";
 142                         reg = <0x40000 0x10000>;
 143                         read-only;
 144                 };
 145
 146                 partition@50000 {
 147                         label = "firmware";
 148                         reg = <0x50000 0x7c0000>;
 149                 };
 150
 151                 partition@810000 {
 152                         label = "firmware2";
 153                         reg = <0x810000 0x7c0000>;
 154                 };
 155
 156                 partition@fd0000 {
 157                         label = "glbcfg";
 158                         reg = <0xfd0000 0x10000>;
 159                         read-only;
 160                 };
 161
 162                 partition@fe0000 {
 163                         label = "board_data";
 164                         reg = <0xfe0000 0x10000>;
 165                         read-only;
 166                 };
 167         };
 168 };
 169
 170 &wmac {
 171         status = "okay";
 172 };