target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
  10         model = "WIZnet WizFi630A";
  11
  12         aliases {
  13                 led-status = &led_run;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS1,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_run: run {
  24                         label = "wizfi630a::run";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 wps {
  29                         label = "wizfi630a::wps";
  30                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 uart1 {
  34                         label = "wizfi630a::uart1";
  35                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 uart2 {
  39                         label = "wizfi630a::uart2";
  40                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59
  60                 scm1 {
  61                         label = "SCM1";
  62                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_0>;
  64                 };
  65
  66                 scm2 {
  67                         label = "SCM2";
  68                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  69                         linux,code = <BTN_1>;
  70                 };
  71         };
  72 };
  73
  74 &gpio1 {
  75         status = "okay";
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <10000000>;
  87
  88                 partition@0 {
  89                         #size-cells = <1>;
  90                         label = "uboot";
  91                         reg = <0x0 0x30000>;
  92                         read-only;
  93                 };
  94
  95                 partition@30000 {
  96                         #size-cells = <1>;
  97                         label = "uboot-env";
  98                         reg = <0x30000 0x10000>;
  99                         read-only;
 100                 };
 101
 102                 factory: partition@40000 {
 103                         #size-cells = <1>;
 104                         label = "factory";
 105                         reg = <0x40000 0x10000>;
 106                         read-only;
 107                 };
 108
 109                 partition@50000 {
 110                         #size-cells = <1>;
 111                         label = "firmware";
 112                         reg = <0x50000 0xfb0000>;
 113                 };
 114         };
 115 };
 116
 117 &uart {
 118         status = "okay";
 119         pinctrl-names = "default";
 120         pinctrl-0 = <&uartf_pins>;
 121 };
 122
 123 &pinctrl {
 124         state_default: pinctrl0 {
 125                 gpio {
 126                         ralink,group = "i2c", "jtag" ;
 127                         ralink,function = "gpio";
 128                 };
 129         };
 130 };
 131
 132 &ethernet {
 133         mtd-mac-address = <&factory 0x4>;
 134 };
 135
 136 &esw {
 137         mediatek,portmap = <0x17>;
 138 };
 139
 140 &wmac {
 141         ralink,mtd-eeprom = <&factory 0>;
 142 };
 143
 144 &ehci {
 145         status = "okay";
 146 };
 147
 148 &ohci {
 149         status = "okay";
 150 };