target/linux/ramips/dts/WNCE2001.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WNCE2001", "ralink,rt3052-soc";
   7         model = "Netgear WNCE2001";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 spi@b00 {
  15                         status = "okay";
  16                         m25p80@0 {
  17                                 #address-cells = <1>;
  18                                 #size-cells = <1>;
  19                                 compatible = "mx25l3205d";
  20                                 reg = <0 0>;
  21                                 linux,modalias = "m25p80", "mx25l3205d";
  22                                 spi-max-frequency = <10000000>;
  23
  24                                 partition@0 {
  25                                         label = "u-boot";
  26                                         reg = <0x0 0x30000>;
  27                                         read-only;
  28                                 };
  29
  30                                 factory: partition@30000 {
  31                                         label = "factory";
  32                                         reg = <0x30000 0x10000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@40000 {
  37                                         label = "config";
  38                                         reg = <0x40000 0x20000>;
  39                                         read-only;
  40                                 };
  41
  42                                 partition@60000 {
  43                                         label = "language";
  44                                         reg = <0x60000 0x30000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@90000 {
  49                                         label = "pot";
  50                                         reg = <0x90000 0x10000>;
  51                                         read-only;
  52                                 };
  53
  54                                 partition@a0000 {
  55                                         label = "checksum";
  56                                         reg = <0xa0000 0x10000>;
  57                                 };
  58
  59                                 partition@b0000 {
  60                                         label = "firmware";
  61                                         reg = <0xb0000 0x350000>;
  62                                 };
  63                         };
  64                 };
  65         };
  66
  67         pinctrl {
  68                 state_default: pinctrl0 {
  69                         gpio {
  70                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  71                                 ralink,function = "gpio";
  72                         };
  73                 };
  74         };
  75
  76         ethernet@10100000 {
  77                 mtd-mac-address = <&factory 0x28>;
  78         };
  79
  80         gpio-leds {
  81                 compatible = "gpio-leds";
  82                 power-green {
  83                         label = "netgear:green:power";
  84                         gpios = <&gpio0 8 1>;
  85                 };
  86                 power-red {
  87                         label = "netgear:red:power";
  88                         gpios = <&gpio0 9 1>;
  89                 };
  90                 wlan-green {
  91                         label = "netgear:green:wlan";
  92                         gpios = <&gpio0 12 0>;
  93                 };
  94                 wlan-red {
  95                         label = "netgear:red:wlan";
  96                         gpios = <&gpio0 13 0>;
  97                 };
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <20>;
 105                 reset {
 106                         label = "reset";
 107                         gpios = <&gpio0 10 1>;
 108                         linux,code = <0x198>;
 109                 };
 110                 wps {
 111                         label = "wps";
 112                         gpios = <&gpio0 0 1>;
 113                         linux,code = <0x211>;
 114                 };
 115                 rt {
 116                         label = "rt";
 117                         gpios = <&gpio0 11 1>;
 118                         linux,code = <0x100>;
 119                 };
 120                 ap {
 121                         label = "ap";
 122                         gpios = <&gpio0 7 1>;
 123                         linux,code = <0x101>;
 124                 };
 125         };
 126 };