target/linux/ramips/dts/YOUKU-YK1.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "youku,yk1", "ralink,mt7620a-soc";
  10         model = "YOUKU YK1";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18                 wan {
  19                         label = "youku-yk1:blue:wan";
  20                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  21                 };
  22                 air {
  23                         label = "youku-yk1:blue:air";
  24                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  25                 };
  26                 usb {
  27                         label = "youku-yk1:blue:usb";
  28                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  29                 };
  30                 led_power: power {
  31                         label = "youku-yk1:blue:power";
  32                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         gpio-keys-polled {
  37                 compatible = "gpio-keys-polled";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40                 poll-interval = <20>;
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47 };
  48
  49 &gpio0 {
  50         status = "okay";
  51 };
  52
  53 &gpio1 {
  54         status = "okay";
  55 };
  56
  57 &gpio2 {
  58         status = "okay";
  59 };
  60
  61 &gpio3 {
  62         status = "okay";
  63 };
  64
  65 &spi0 {
  66         status = "okay";
  67
  68         m25p80@0 {
  69                 #address-cells = <1>;
  70                 #size-cells = <1>;
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <10000000>;
  74
  75                 partition@0 {
  76                         label = "u-boot";
  77                         reg = <0x0 0x30000>;
  78                         read-only;
  79                 };
  80
  81                 partition@30000 {
  82                         label = "u-boot-env";
  83                         reg = <0x30000 0x10000>;
  84                         read-only;
  85                 };
  86
  87                 factory: partition@40000 {
  88                         label = "factory";
  89                         reg = <0x40000 0x10000>;
  90                         read-only;
  91                 };
  92
  93                 partition@50000 {
  94                         label = "firmware";
  95                         reg = <0x50000 0x1fb0000>;
  96                 };
  97         };
  98 };
  99
 100 &pinctrl {
 101         state_default: pinctrl0 {
 102                 default {
 103                         ralink,group = "i2c", "rgmii1", "ephy", "wled";
 104                         ralink,function = "gpio";
 105                 };
 106         };
 107 };
 108
 109 &ethernet {
 110         pinctrl-names = "default";
 111         mtd-mac-address = <&factory 0x4>;
 112         mediatek,portmap = "llllw";
 113 };
 114
 115 &wmac {
 116         ralink,mtd-eeprom = <&factory 0>;
 117 };
 118
 119 &sdhci {
 120         status = "okay";
 121 };
 122
 123 &ehci {
 124         status = "okay";
 125 };
 126
 127 &ohci {
 128         status = "okay";
 129 };