target/linux/ramips/dts/ZBT-WR8305RT.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
  10         model = "Zbtlink ZBT-WR8305RT";
  11
  12         aliases {
  13                 led-status = &led_sys;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_sys: sys {
  20                         label = "zbt-wr8305rt:green:sys";
  21                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 lan {
  25                         label = "zbt-wr8305rt:green:usb";
  26                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wifi {
  30                         label = "zbt-wr8305rt:green:wifi";
  31                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <20>;
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47 };
  48
  49 &gpio1 {
  50         status = "okay";
  51 };
  52
  53 &gpio3 {
  54         status = "okay";
  55 };
  56
  57 &spi0 {
  58         status = "okay";
  59
  60         m25p80@0 {
  61                 #address-cells = <1>;
  62                 #size-cells = <1>;
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <10000000>;
  66
  67                 partition@0 {
  68                         label = "u-boot";
  69                         reg = <0x0 0x30000>;
  70                         read-only;
  71                 };
  72
  73                 partition@30000 {
  74                         label = "u-boot-env";
  75                         reg = <0x30000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 factory: partition@40000 {
  80                         label = "factory";
  81                         reg = <0x40000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 partition@50000 {
  86                         label = "firmware";
  87                         reg = <0x50000 0x7b0000>;
  88                 };
  89         };
  90 };
  91
  92 &ehci {
  93         status = "okay";
  94 };
  95
  96 &ohci {
  97         status = "okay";
  98 };
  99
 100 &ethernet {
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&ephy_pins>;
 103         mtd-mac-address = <&factory 0x4>;
 104         mediatek,portmap = "llllw";
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0>;
 109 };
 110
 111 &pinctrl {
 112         state_default: pinctrl0 {
 113                 default {
 114                         ralink,group = "i2c", "uartf", "spi refclk", "wled";
 115                         ralink,function = "gpio";
 116                 };
 117         };
 118 };