target/linux/ramips/dts/mt7620a_lenovo_newifi-y1s.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a_lenovo_newifi-y1.dtsi"
   4
   5 / {
   6         compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
   7         model = "Lenovo Y1S";
   8
   9         aliases {
  10                 led-boot = &led_power_blue;
  11                 led-failsafe = &led_power_blue;
  12                 led-running = &led_power_blue;
  13                 led-upgrade = &led_power_blue;
  14                 label-mac-device = &ethernet;
  15         };
  16
  17         gpio_export {
  18                 compatible = "gpio-export";
  19                 #size-cells = <0>;
  20
  21                 usb0 {
  22                         gpio-export,name = "usb0";
  23                         gpio-export,output = <1>;
  24                         gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
  25                 };
  26                 usb1 {
  27                         gpio-export,name = "usb1";
  28                         gpio-export,output = <1>;
  29                         gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
  30                 };
  31                 usb2 {
  32                         gpio-export,name = "usb2";
  33                         gpio-export,output = <1>;
  34                         gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 power1 {
  42                         label = "newifi-y1s:yellow:power";
  43                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 led_power_blue: power2 {
  47                         label = "newifi-y1s:blue:power";
  48                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wlan1 {
  52                         label = "newifi-y1s:yellow:wifi";
  53                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 wlan2 {
  57                         label = "newifi-y1s:blue:wifi";
  58                         gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 usb1 {
  62                         label = "newifi-y1s:yellow:usb";
  63                         gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 usb2 {
  67                         label = "newifi-y1s:blue:usb";
  68                         gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
  69                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  70                         linux,default-trigger = "usbport";
  71                 };
  72
  73                 internet {
  74                         label = "newifi-y1s:blue:internet";
  75                         gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
  76                 };
  77         };
  78 };
  79
  80 &ethernet {
  81         status = "okay";
  82         mtd-mac-address = <&factory 0x28>;
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  85         mediatek,portmap = "wllll";
  86
  87         port@4 {
  88                 status = "okay";
  89                 phy-handle = <&phy4>;
  90                 phy-mode = "rgmii";
  91         };
  92
  93         port@5 {
  94                 status = "okay";
  95                 phy-handle = <&phy5>;
  96                 phy-mode = "rgmii";
  97         };
  98
  99         mdio-bus {
 100                 status = "okay";
 101
 102                 phy4: ethernet-phy@4 {
 103                         reg = <4>;
 104                         phy-mode = "rgmii";
 105                 };
 106
 107                 phy5: ethernet-phy@5 {
 108                         reg = <5>;
 109                         phy-mode = "rgmii";
 110                 };
 111         };
 112 };
 113
 114 &gsw {
 115         mediatek,port4 = "gmac";
 116 };