target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
  10         model = "Phicomm PSG1208";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_wps: wps {
  23                         label = "psg1208:white:wps";
  24                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wlan {
  28                         label = "psg1208:white:wlan2g";
  29                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         keys {
  34                 compatible = "gpio-keys";
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41         };
  42 };
  43
  44 &gpio1 {
  45         status = "okay";
  46 };
  47
  48 &gpio3 {
  49         status = "okay";
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 spi-max-frequency = <10000000>;
  59
  60                 partitions {
  61                         compatible = "fixed-partitions";
  62                         #address-cells = <1>;
  63                         #size-cells = <1>;
  64
  65                         partition@0 {
  66                                 label = "u-boot";
  67                                 reg = <0x0 0x30000>;
  68                                 read-only;
  69                         };
  70
  71                         partition@20000 {
  72                                 label = "u-boot-env";
  73                                 reg = <0x30000 0x10000>;
  74                                 read-only;
  75                         };
  76
  77                         factory: partition@30000 {
  78                                 label = "factory";
  79                                 reg = <0x40000 0x10000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@40000 {
  84                                 compatible = "denx,uimage";
  85                                 label = "firmware";
  86                                 reg = <0x50000 0x7b0000>;
  87                         };
  88                 };
  89         };
  90 };
  91
  92 &state_default {
  93         gpio {
  94                 ralink,group = "i2c", "spi refclk", "wled";
  95                 ralink,function = "gpio";
  96         };
  97 };
  98
  99 &ethernet {
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&ephy_pins>;
 102         mtd-mac-address = <&factory 0x4>;
 103         mediatek,portmap = "llllw";
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108 };
 109
 110 &pcie0 {
 111         mt76@0,0 {
 112                 reg = <0x0000 0 0 0 0>;
 113                 mediatek,mtd-eeprom = <&factory 0x8000>;
 114                 ieee80211-freq-limit = <5000000 6000000>;
 115         };
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&factory 0>;
 120 };