target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
  10         model = "Planex CS-QR10";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "cs-qr10:red:power";
  24                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys";
  30
  31                 s1 {
  32                         label = "reset";
  33                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36
  37                 s2 {
  38                         label = "wps";
  39                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42         };
  43 };
  44
  45 &gpio0 {
  46         status = "okay";
  47 };
  48
  49 &gpio1 {
  50         status = "okay";
  51 };
  52
  53 &gpio2 {
  54         status = "okay";
  55 };
  56
  57 &gpio3 {
  58         status = "okay";
  59 };
  60
  61 &i2c {
  62         status = "okay";
  63 };
  64
  65 &i2s {
  66         status = "okay";
  67         pinctrl-names = "default";
  68         pinctrl-0 = <&pcm_i2s_pins>;
  69 };
  70
  71 &spi0 {
  72         status = "okay";
  73
  74         m25p80@0 {
  75                 compatible = "jedec,spi-nor";
  76                 reg = <0>;
  77                 spi-max-frequency = <10000000>;
  78
  79                 partitions {
  80                         compatible = "fixed-partitions";
  81                         #address-cells = <1>;
  82                         #size-cells = <1>;
  83
  84                         partition@0 {
  85                                 label = "u-boot";
  86                                 reg = <0x0 0x30000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@30000 {
  91                                 label = "u-boot-env";
  92                                 reg = <0x30000 0x10000>;
  93                                 read-only;
  94                         };
  95
  96                         factory: partition@40000 {
  97                                 label = "factory";
  98                                 reg = <0x40000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@50000 {
 103                                 compatible = "denx,uimage";
 104                                 label = "firmware";
 105                                 reg = <0x50000 0x7b0000>;
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &pcm {
 112         status = "okay";
 113 };
 114
 115 &gdma {
 116         status = "okay";
 117 };
 118
 119 &state_default {
 120         gpio {
 121                 ralink,group = "spi refclk", "rgmii1";
 122                 ralink,function = "gpio";
 123         };
 124         wdt {
 125                 ralink,group = "wdt";
 126                 ralink,function = "wdt refclk";
 127         };
 128 };
 129
 130 &ethernet {
 131         pinctrl-names = "default";
 132         pinctrl-0 = <&ephy_pins>;
 133         mtd-mac-address = <&factory 0x4>;
 134         mediatek,portmap = "llllw";
 135 };
 136
 137 &gsw {
 138         ralink,port4 = "ephy";
 139 };
 140
 141 &sdhci {
 142         status = "okay";
 143 };
 144
 145 &ehci {
 146         status = "okay";
 147 };
 148
 149 &ohci {
 150         status = "okay";
 151 };
 152
 153 &wmac {
 154         ralink,mtd-eeprom = <&factory 0>;
 155 };