target/linux/ramips/dts/mt7620n_vonets_var11n-300.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
  10         model = "Vonets VAR11N-300";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_system: system {
  23                         label = "var11n-300:blue:system";
  24                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys";
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36         };
  37 };
  38
  39 &gpio0 {
  40         status = "okay";
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         m25p80@0 {
  47                 compatible = "jedec,spi-nor";
  48                 reg = <0>;
  49                 spi-max-frequency = <10000000>;
  50
  51                 partitions {
  52                         compatible = "fixed-partitions";
  53                         #address-cells = <1>;
  54                         #size-cells = <1>;
  55
  56                         partition@0 {
  57                                 label = "u-boot";
  58                                 reg = <0x0 0x30000>;
  59                                 read-only;
  60                         };
  61
  62                         partition@30000 {
  63                                 label = "u-boot-env";
  64                                 reg = <0x30000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         factory: partition@40000 {
  69                                 label = "factory";
  70                                 reg = <0x40000 0x10000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@50000 {
  75                                 compatible = "denx,uimage";
  76                                 label = "firmware";
  77                                 reg = <0x50000 0x3b0000>;
  78                         };
  79                 };
  80         };
  81 };
  82
  83 &ethernet {
  84         mtd-mac-address = <&factory 0x4>;
  85         mediatek,portmap = "llllw";
  86 };
  87
  88 &wmac {
  89         ralink,mtd-eeprom = <&factory 0>;
  90 };
  91
  92 &state_default {
  93         default {
  94                 ralink,group = "i2c";
  95                 ralink,function = "gpio";
  96         };
  97 };