target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
  10         model = "Zbtlink ZBT-CPE102";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &led_4g_0;
  18                 led-failsafe = &led_4g_0;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_4g_0: 4g-0 {
  25                         label = "zbt-cpe102:green:4g-0";
  26                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 4g-1 {
  30                         label = "zbt-cpe102:green:4g-1";
  31                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 4g-2 {
  35                         label = "zbt-cpe102:green:4g-2";
  36                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                 };
  48         };
  49 };
  50
  51 &gpio1 {
  52         status = "okay";
  53 };
  54
  55 &gpio2 {
  56         status = "okay";
  57 };
  58
  59 &gpio3 {
  60         status = "okay";
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         en25q64@0 {
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <10000000>;
  70
  71                 partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x0 0x30000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@30000 {
  83                                 label = "u-boot-env";
  84                                 reg = <0x30000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         factory: partition@40000 {
  89                                 label = "factory";
  90                                 reg = <0x40000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "denx,uimage";
  96                                 label = "firmware";
  97                                 reg = <0x50000 0x760000>;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &ehci {
 104         status = "okay";
 105 };
 106
 107 &ohci {
 108         status = "okay";
 109 };
 110
 111 &ethernet {
 112         mtd-mac-address = <&factory 0x4>;
 113         mediatek,portmap = "wllll";
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };
 119
 120 &state_default {
 121         default {
 122                 ralink,group = "i2c", "spi refclk", "wled";
 123                 ralink,function = "gpio";
 124         };
 125 };