target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
  10         model = "ZyXEL Keenetic Omni II";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 wan {
  23                         label = "keenetic-omni-ii:green:wan";
  24                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 usb {
  28                         label = "keenetic-omni-ii:green:usb";
  29                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  30                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  31                         linux,default-trigger = "usbport";
  32                 };
  33
  34                 wifi {
  35                         label = "keenetic-omni-ii:green:wifi";
  36                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_power: power {
  40                         label = "keenetic-omni-ii:green:power";
  41                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59
  60                 fn {
  61                         label = "fn";
  62                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_0>;
  64                 };
  65         };
  66
  67         gpio_export {
  68                 compatible = "gpio-export";
  69                 #size-cells = <0>;
  70
  71                 usb_power {
  72                         gpio-export,name = "usb";
  73                         gpio-export,output = <1>;
  74                         gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
  75                 };
  76         };
  77 };
  78
  79 &gpio1 {
  80         status = "okay";
  81 };
  82
  83 &gpio3 {
  84         status = "okay";
  85 };
  86
  87 &spi0 {
  88         status = "okay";
  89
  90         m25p80@0 {
  91                 compatible = "jedec,spi-nor";
  92                 reg = <0>;
  93                 spi-max-frequency = <10000000>;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         partition@0 {
 101                                 label = "u-boot";
 102                                 reg = <0x0 0x30000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@30000 {
 107                                 label = "u-boot-env";
 108                                 reg = <0x30000 0x10000>;
 109                                 read-only;
 110                         };
 111
 112                         factory: partition@40000 {
 113                                 label = "factory";
 114                                 reg = <0x40000 0x10000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@50000 {
 119                                 compatible = "denx,uimage";
 120                                 label = "firmware";
 121                                 reg = <0x50000 0x7b0000>;
 122                         };
 123                 };
 124         };
 125 };
 126
 127 &state_default {
 128         gpio {
 129                 ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
 130                 ralink,function = "gpio";
 131         };
 132 };
 133
 134 &ethernet {
 135         mtd-mac-address = <&factory 0x4>;
 136         mediatek,portmap = "wllll";
 137 };
 138
 139 &wmac {
 140         ralink,mtd-eeprom = <&factory 0>;
 141 };
 142
 143 &ehci {
 144         status = "okay";
 145 };
 146
 147 &ohci {
 148         status = "okay";
 149 };