target/linux/ramips/dts/mt7621_asiarf_ap7621.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 reset {
  17                         label = "reset";
  18                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  19                         linux,code = <KEY_RESTART>;
  20                 };
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 wlan1 {
  27                         label = "ap7621-001:orange:wlan1";
  28                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wlan0 {
  32                         label = "ap7621-001:orange:wlan0";
  33                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36 };
  37
  38 &sdhci {
  39         status = "okay";
  40 };
  41
  42 &spi0 {
  43         status = "okay";
  44
  45         flash@0 {
  46                 compatible = "jedec,spi-nor";
  47                 reg = <0>;
  48                 spi-max-frequency = <40000000>;
  49
  50                 partitions {
  51                         compatible = "fixed-partitions";
  52                         #address-cells = <1>;
  53                         #size-cells = <1>;
  54
  55                         partition@0 {
  56                                 label = "u-boot";
  57                                 reg = <0x0 0x30000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@30000 {
  62                                 label = "u-boot-env";
  63                                 reg = <0x30000 0x2000>;
  64                         };
  65
  66                         partition@32000 {
  67                                 label = "2860";
  68                                 reg = <0x32000 0x4000>;
  69                         };
  70
  71                         partition@36000 {
  72                                 label = "rtdev";
  73                                 reg = <0x36000 0x2000>;
  74                         };
  75
  76                         partition@38000 {
  77                                 label = "Reserve";
  78                                 reg = <0x38000 0x8000>;
  79                         };
  80
  81                         factory: partition@40000 {
  82                                 label = "factory";
  83                                 reg = <0x40000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@50000 {
  88                                 label = "firmware";
  89                                 reg = <0x50000 0xfa0000>;
  90                                 compatible = "denx,uimage";
  91                         };
  92
  93                         partition@ff0000 {
  94                                 label = "nvram";
  95                                 reg = <0xff0000 0x10000>;
  96                                 read-only;
  97                         };
  98                 };
  99         };
 100 };
 101
 102 &pcie {
 103         status = "okay";
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0xe000>;
 108         mediatek,portmap = "llllw";
 109 };
 110
 111 &state_default {
 112         gpio {
 113                 ralink,group = "wdt", "jtag";
 114                 ralink,function = "gpio";
 115         };
 116 };