target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
  10         model = "D-Link DIR-860L B1";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17                 label-mac-device = &wifi1;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,57600";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "dir-860l-b1:orange:power";
  29                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_power_green: power2 {
  33                         label = "dir-860l-b1:green:power";
  34                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 net {
  38                         label = "dir-860l-b1:orange:net";
  39                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 net2 {
  43                         label = "dir-860l-b1:green:net";
  44                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47
  48         keys {
  49                 compatible = "gpio-keys";
  50
  51                 reset {
  52                         label = "reset";
  53                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56
  57                 wps {
  58                         label = "wps";
  59                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_WPS_BUTTON>;
  61                 };
  62         };
  63 };
  64
  65 &spi0 {
  66         status = "okay";
  67
  68         m25p80@0 {
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <10000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x0 0x30000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@30000 {
  85                                 label = "u-boot-env";
  86                                 reg = <0x30000 0x4000>;
  87                                 read-only;
  88                         };
  89
  90                         radio: partition@34000 {
  91                                 label = "radio";
  92                                 reg = <0x34000 0x4000>;
  93                                 read-only;
  94                         };
  95
  96                         factory: partition@38000 {
  97                                 label = "factory";
  98                                 reg = <0x38000 0x8000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@40000 {
 103                                 label = "defaults";
 104                                 reg = <0x40000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@50000 {
 109                                 compatible = "seama";
 110                                 label = "firmware";
 111                                 reg = <0x50000 0xfb0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119 };
 120
 121 &pcie0 {
 122         wifi0: mt76@0,0 {
 123                 reg = <0x0000 0 0 0 0>;
 124                 mediatek,mtd-eeprom = <&radio 0x2000>;
 125                 ieee80211-freq-limit = <5000000 6000000>;
 126         };
 127 };
 128
 129 &pcie1 {
 130         wifi1: mt76@0,0 {
 131                 reg = <0x0000 0 0 0 0>;
 132                 mediatek,mtd-eeprom = <&radio 0>;
 133                 ieee80211-freq-limit = <2400000 2500000>;
 134         };
 135 };
 136
 137 &state_default {
 138         gpio {
 139                 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 140                 ralink,function = "gpio";
 141         };
 142 };