target/linux/ramips/dts/mt7621_phicomm_k2p.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "phicomm,k2p", "mediatek,mt7621-soc";
  10         model = "Phicomm K2P";
  11
  12         aliases {
  13                 led-boot = &led_blue;
  14                 led-failsafe = &led_blue;
  15                 led-running = &led_blue;
  16                 led-upgrade = &led_blue;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 stat_r {
  27                         label = "k2p:red:status";
  28                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 stat_y {
  32                         label = "k2p:yellow:status";
  33                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_blue: stat_b {
  37                         label = "k2p:blue:status";
  38                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50         };
  51 };
  52
  53 &spi0 {
  54         status = "okay";
  55
  56         m25p80@0 {
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <10000000>;
  60
  61                 partitions {
  62                         compatible = "fixed-partitions";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65
  66                         partition@0 {
  67                                 label = "u-boot";
  68                                 reg = <0x0 0x30000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@30000 {
  73                                 label = "u-boot-env";
  74                                 reg = <0x30000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         factory: partition@40000 {
  79                                 label = "factory";
  80                                 reg = <0x40000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@50000 {
  85                                 label = "permanent_config";
  86                                 reg = <0x50000 0x50000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@a0000 {
  91                                 compatible = "denx,uimage";
  92                                 label = "firmware";
  93                                 reg = <0xa0000 0xf60000>;
  94                         };
  95                 };
  96         };
  97 };
  98
  99 &pcie {
 100         status = "okay";
 101 };
 102
 103 &pcie0 {
 104         mt76@0,0 {
 105                 reg = <0x0000 0 0 0 0>;
 106                 mediatek,mtd-eeprom = <&factory 0x0>;
 107         };
 108 };
 109
 110 &ethernet {
 111         mtd-mac-address = <&factory 0xe000>;
 112 };
 113
 114 &state_default {
 115         gpio {
 116                 ralink,group = "i2c", "jtag";
 117                 ralink,function = "gpio";
 118         };
 119 };