ramips: move compatible for Ubiquiti Edgerouter X to DTS file
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7621_tplink_re650-v1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7621.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "tplink,re650-v1", "mediatek,mt7621-soc";
11 model = "TP-Link RE650 v1";
12
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 label-mac-device = &ethernet;
19 };
20
21 chosen {
22 bootargs = "console=ttyS0,57600";
23 };
24
25 leds {
26 compatible = "gpio-leds";
27
28 led_power: power {
29 label = "re650-v1:blue:power";
30 gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
31 };
32
33 wifi2g {
34 label = "re650-v1:blue:wifi2G";
35 gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
36 };
37
38 wifi5g {
39 label = "re650-v1:blue:wifi5G";
40 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
41 };
42
43 wps_red {
44 label = "re650-v1:red:wps";
45 gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
46 };
47
48 wps_blue {
49 label = "re650-v1:blue:wps";
50 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
51 };
52
53 eth_act {
54 label = "re650-v1:green:eth_act";
55 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
56 };
57
58 eth_link {
59 label = "re650-v1:green:eth_link";
60 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
61 };
62 };
63
64 keys {
65 compatible = "gpio-keys";
66
67 wps {
68 label = "wps";
69 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
70 debounce-interval = <60>;
71 linux,code = <KEY_WPS_BUTTON>;
72 };
73
74 power {
75 label = "power";
76 gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
77 debounce-interval = <60>;
78 linux,code = <KEY_POWER>;
79 };
80
81 led {
82 label = "led";
83 gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
84 debounce-interval = <60>;
85 linux,code = <KEY_LIGHTS_TOGGLE>;
86 };
87
88 reset {
89 label = "reset";
90 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
91 debounce-interval = <60>;
92 linux,code = <KEY_RESTART>;
93 };
94 };
95 };
96
97 &spi0 {
98 status = "okay";
99
100 w25q64@0 {
101 compatible = "jedec,spi-nor";
102 reg = <0>;
103 spi-max-frequency = <40000000>;
104
105 partitions {
106 compatible = "fixed-partitions";
107 #address-cells = <1>;
108 #size-cells = <1>;
109
110 partition@0 {
111 label = "u-boot";
112 reg = <0x0 0x20000>;
113 read-only;
114 };
115
116 partition@20000 {
117 compatible = "tplink,firmware";
118 label = "firmware";
119 reg = <0x20000 0xde0000>;
120 };
121
122 config: partition@e00000 {
123 label = "config";
124 reg = <0xe00000 0x50000>;
125 read-only;
126 };
127
128 /* range 0xe50000 to 0xff0000 is empty in vendor
129 * firmware, so we do not use it either
130 */
131
132 radio: partition@ff0000 {
133 label = "radio";
134 reg = <0xff0000 0x10000>;
135 read-only;
136 };
137 };
138 };
139 };
140
141 &pcie {
142 status = "okay";
143 };
144
145 &pcie0 {
146 wifi@0,0 {
147 compatible = "mediatek,mt76";
148 reg = <0x0000 0 0 0 0>;
149 mediatek,mtd-eeprom = <&radio 0>;
150 mtd-mac-address = <&config 0x10008>;
151 mtd-mac-address-increment = <1>;
152 ieee80211-freq-limit = <2400000 2500000>;
153 };
154 };
155
156 &pcie1 {
157 wifi@0,0 {
158 compatible = "mediatek,mt76";
159 reg = <0x0000 0 0 0 0>;
160 mediatek,mtd-eeprom = <&radio 0x8000>;
161 mtd-mac-address = <&config 0x10008>;
162 mtd-mac-address-increment = <2>;
163 ieee80211-freq-limit = <5000000 6000000>;
164 };
165 };
166
167 &ethernet {
168 mtd-mac-address = <&config 0x10008>;
169 };
170
171 &state_default {
172 gpio {
173 ralink,group = "rgmii2", "wdt";
174 ralink,function = "gpio";
175 };
176 };