target/linux/ramips/dts/mt7621_wevo_w2914ns-v2.dtsi

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         chosen {
   8                 bootargs = "console=ttyS0,57600";
   9         };
  10
  11         keys {
  12                 compatible = "gpio-keys";
  13
  14                 reset {
  15                         label = "reset";
  16                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  17                         linux,code = <KEY_RESTART>;
  18                 };
  19
  20                 wps {
  21                         label = "wps";
  22                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_WPS_BUTTON>;
  24                 };
  25         };
  26 };
  27
  28 &spi0 {
  29         status = "okay";
  30
  31         flash@0 {
  32                 compatible = "jedec,spi-nor";
  33                 reg = <0>;
  34                 spi-max-frequency = <80000000>;
  35                 m25p,fast-read;
  36
  37                 partitions {
  38                         compatible = "fixed-partitions";
  39                         #address-cells = <1>;
  40                         #size-cells = <1>;
  41
  42                         partition@0 {
  43                                 label = "u-boot";
  44                                 reg = <0x0 0x30000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@30000 {
  49                                 label = "u-boot-env";
  50                                 reg = <0x30000 0x10000>;
  51                                 read-only;
  52                         };
  53
  54                         factory: partition@40000 {
  55                                 label = "factory";
  56                                 reg = <0x40000 0x10000>;
  57                                 read-only;
  58                         };
  59
  60                         partition@50000 {
  61                                 compatible = "denx,uimage";
  62                                 label = "firmware";
  63                                 reg = <0x50000 0xfb0000>;
  64                         };
  65                 };
  66         };
  67 };
  68
  69 &pcie {
  70         status = "okay";
  71 };
  72
  73 &pcie0 {
  74         wifi@0,0 {
  75                 compatible = "mediatek,mt76";
  76                 reg = <0x0000 0 0 0 0>;
  77                 mediatek,mtd-eeprom = <&factory 0x0>;
  78
  79                 led {
  80                         led-sources = <0>;
  81                         led-active-low;
  82                 };
  83         };
  84 };
  85
  86 &pcie1 {
  87         wifi@0,0 {
  88                 compatible = "mediatek,mt76";
  89                 reg = <0x0000 0 0 0 0>;
  90                 mediatek,mtd-eeprom = <&factory 0x8000>;
  91                 ieee80211-freq-limit = <5000000 6000000>;
  92
  93                 led {
  94                         led-sources = <2>;
  95                         led-active-low;
  96                 };
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0xe000>;
 102 };
 103
 104 &state_default {
 105         gpio {
 106                 ralink,group = "wdt", "rgmii2";
 107                 ralink,function = "gpio";
 108         };
 109 };