target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "xzwifi,creativebox-v1", "mediatek,mt7621-soc";
  11         model = "CreativeBox v1";
  12
  13         aliases {
  14                 led-boot = &led_sys;
  15                 led-failsafe = &led_sys;
  16                 led-running = &led_sys;
  17                 led-upgrade = &led_sys;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "creativebox-v1:blue:power";
  29                         gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 led_sys: sys {
  34                         label = "creativebox-v1:blue:sys";
  35                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 internet {
  39                         label = "creativebox-v1:blue:internet";
  40                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan2g {
  44                         label = "creativebox-v1:blue:wlan2g";
  45                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48
  49                 wlan5g {
  50                         label = "creativebox-v1:blue:wlan5g";
  51                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys";
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64         };
  65
  66         gpio_export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 power_usb2 {
  71                         gpio-export,name = "power_usb2";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 power_usb3 {
  77                         gpio-export,name = "power_usb3";
  78                         gpio-export,output = <1>;
  79                         gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
  80                 };
  81
  82                 power_sata {
  83                         gpio-export,name = "power_sata";
  84                         gpio-export,output = <1>;
  85                         gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
  86                 };
  87         };
  88 };
  89
  90 &spi0 {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <40000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         partition@0 {
 104                                 label = "u-boot";
 105                                 reg = <0x0 0x30000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@30000 {
 110                                 label = "u-boot-env";
 111                                 reg = <0x30000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         factory: partition@40000 {
 116                                 label = "factory";
 117                                 reg = <0x40000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@50000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x50000 0x1fb0000>;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &sdhci {
 131         status = "okay";
 132 };
 133
 134 &pcie {
 135         status = "okay";
 136 };
 137
 138 &pcie0 {
 139         wifi@0,0 {
 140                 compatible = "pci1400,7603";
 141                 reg = <0x0000 0 0 0 0>;
 142                 mediatek,mtd-eeprom = <&factory 0x0000>;
 143         };
 144 };
 145
 146 &pcie1 {
 147         wifi@0,0 {
 148                 compatible = "pci14c3,7662";
 149                 reg = <0x0000 0 0 0 0>;
 150                 mediatek,mtd-eeprom = <&factory 0x8000>;
 151                 ieee80211-freq-limit = <5000000 6000000>;
 152         };
 153 };
 154
 155 &ethernet {
 156         mtd-mac-address = <&factory 0xe000>;
 157 };
 158
 159 &state_default {
 160         gpio {
 161                 ralink,group = "wdt", "rgmii2";
 162                 ralink,function = "gpio";
 163         };
 164 };