target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 /{
   9         compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
  10         model = "GL-MT300N-V2";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "gl-mt300n-v2:green:power";
  29                         default-state = "on";
  30                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wan {
  34                         label = "gl-mt300n-v2:green:wan";
  35                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wlan {
  39                         label = "gl-mt300n-v2:red:wlan";
  40                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys";
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 BTN_0 {
  54                         label = "BTN_0";
  55                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  56                         linux,code = <BTN_0>;
  57                 };
  58
  59                 BTN_1 {
  60                         label = "BTN_1";
  61                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  62                         linux,code = <BTN_1>;
  63                 };
  64         };
  65
  66         gpio_export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 usb {
  71                         gpio-export,name = "usb";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  74                 };
  75         };
  76 };
  77
  78 &state_default {
  79         gpio {
  80                 ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
  81                 ralink,function = "gpio";
  82         };
  83 };
  84
  85 &ethernet {
  86         mtd-mac-address = <&factory 0x4>;
  87 };
  88
  89 &wmac {
  90         status = "okay";
  91 };
  92
  93 &spi0 {
  94         status = "okay";
  95
  96         m25p80@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <10000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x0 0x30000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@30000 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x30000 0x10000>;
 115                                 read-only;
 116                         };
 117
 118                         factory: partition@40000 {
 119                                 label = "factory";
 120                                 reg = <0x40000 0x10000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@50000 {
 125                                 compatible = "denx,uimage";
 126                                 label = "firmware";
 127                                 reg = <0x50000 0xfb0000>;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &uart1 {
 134         status = "okay";
 135 };
 136
 137 &ehci {
 138         status = "okay";
 139 };
 140
 141 &ohci {
 142         status = "okay";
 143 };