target/linux/ramips/dts/mt7628an_tplink_re200.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &ethernet;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600n8";
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 reset {
  21                         label = "reset";
  22                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_RESTART>;
  24                 };
  25
  26                 wps {
  27                         label = "wps";
  28                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_WPS_BUTTON>;
  30                 };
  31         };
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         m25p80@0 {
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <50000000>;
  41
  42                 partitions {
  43                         compatible = "fixed-partitions";
  44                         #address-cells = <1>;
  45                         #size-cells = <1>;
  46
  47                         partition@0 {
  48                                 label = "u-boot";
  49                                 reg = <0x0 0x20000>;
  50                                 read-only;
  51                         };
  52
  53                         partition@20000 {
  54                                 compatible = "tplink,firmware";
  55                                 label = "firmware";
  56                                 reg = <0x20000 0x7a0000>;
  57                         };
  58
  59                         config: partition@7c0000 {
  60                                 label = "config";
  61                                 reg = <0x7c0000 0x30000>;
  62                                 read-only;
  63                         };
  64
  65                         radio: partition@7f0000 {
  66                                 label = "radio";
  67                                 reg = <0x7f0000 0x10000>;
  68                                 read-only;
  69                         };
  70                 };
  71         };
  72 };
  73
  74 &ethernet {
  75         mtd-mac-address = <&config 0x2008>;
  76 };
  77
  78 &wmac {
  79         status = "okay";
  80
  81         mediatek,mtd-eeprom = <&radio 0x0>;
  82         mtd-mac-address = <&config 0x2008>;
  83         mtd-mac-address-increment = <1>;
  84 };
  85
  86 &pcie {
  87         status = "okay";
  88 };
  89
  90 &pcie0 {
  91         mt76@0,0 {
  92                 reg = <0x0000 0 0 0 0>;
  93                 mediatek,mtd-eeprom = <&radio 0x8000>;
  94                 ieee80211-freq-limit = <5000000 6000000>;
  95                 mtd-mac-address = <&config 0x2008>;
  96                 mtd-mac-address-increment = <2>;
  97         };
  98 };