target/linux/ramips/dts/mt7628an_wavlink_wl-wn575a3.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
   9         model = "Wavlink WL-WN575A3";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,57600";
  13         };
  14
  15         keys {
  16                 compatible = "gpio-keys";
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23
  24                 wps {
  25                         label = "wps";
  26                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_WPS_BUTTON>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 wifi-high {
  35                         label = "wl-wn575a3:green:wifi-high";
  36                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wifi-med {
  40                         label = "wl-wn575a3:green:wifi-med";
  41                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wifi-low {
  45                         label = "wl-wn575a3:green:wifi-low";
  46                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wps {
  50                         label = "wl-wn575a3:green:wps";
  51                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  52                 };
  53         };
  54 };
  55
  56 &state_default {
  57         gpio {
  58                 ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
  59                 ralink,function = "gpio";
  60         };
  61 };
  62
  63 &pcie {
  64         status = "okay";
  65 };
  66
  67 &pcie0 {
  68         mt76@0,0 {
  69                 reg = <0x0000 0 0 0 0>;
  70                 mediatek,mtd-eeprom = <&factory 0x8000>;
  71                 ieee80211-freq-limit = <5000000 6000000>;
  72         };
  73 };
  74
  75 &spi0 {
  76         status = "okay";
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <10000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "u-boot";
  90                                 reg = <0x0 0x30000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@30000 {
  95                                 label = "u-boot-env";
  96                                 reg = <0x30000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         factory: partition@40000 {
 101                                 label = "factory";
 102                                 reg = <0x40000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@50000 {
 107                                 compatible = "denx,uimage";
 108                                 label = "firmware";
 109                                 reg = <0x50000 0x7b0000>;
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &wmac {
 116         status = "okay";
 117 };
 118
 119 &ethernet {
 120         mtd-mac-address = <&factory 0x28>;
 121 };
 122
 123 &esw {
 124         mediatek,portmap = <0x2f>;
 125 };