ramips: move compatible for Ubiquiti Edgerouter X to DTS file
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7628an_zyxel_keenetic-extra-ii.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
10 model = "ZyXEL Keenetic Extra II";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 chosen {
20 bootargs = "console=ttyS0,57600n8";
21 };
22
23 keys {
24 compatible = "gpio-keys";
25
26 reset {
27 label = "reset";
28 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RESTART>;
30 };
31
32 wps {
33 label = "wps";
34 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_WPS_BUTTON>;
36 };
37
38 fn {
39 label = "fn";
40 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
41 linux,code = <BTN_0>;
42 };
43 };
44
45 leds {
46 compatible = "gpio-leds";
47
48 led_power: power {
49 label = "keenetic-extra-ii:green:power";
50 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
51 default-state = "keep";
52 };
53
54 internet {
55 label = "keenetic-extra-ii:green:internet";
56 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
57 };
58
59 wifi {
60 label = "keenetic-extra-ii:green:wifi";
61 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
62 };
63
64 usb {
65 label = "keenetic-extra-ii:green:usb";
66 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
67 trigger-sources = <&ohci_port1>, <&ehci_port1>;
68 linux,default-trigger = "usbport";
69 };
70 };
71
72 gpio_export {
73 compatible = "gpio-export";
74 #size-cells = <0>;
75
76 usbpower {
77 gpio-export,name = "usbpower";
78 gpio-export,output = <1>;
79 gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
80 };
81 };
82 };
83
84 &spi0 {
85 status = "okay";
86
87 m25p80@0 {
88 compatible = "jedec,spi-nor";
89 reg = <0>;
90 spi-max-frequency = <10000000>;
91
92 partitions {
93 compatible = "fixed-partitions";
94 #address-cells = <1>;
95 #size-cells = <1>;
96
97 partition@0 {
98 label = "u-boot";
99 reg = <0x0 0x30000>;
100 read-only;
101 };
102
103 partition@30000 {
104 label = "u-config";
105 reg = <0x30000 0x10000>;
106 read-only;
107 };
108
109 factory: partition@40000 {
110 label = "factory";
111 reg = <0x40000 0x10000>;
112 read-only;
113 };
114
115 partition@50000 {
116 compatible = "denx,uimage";
117 label = "firmware";
118 reg = <0x50000 0xe90000>;
119 };
120
121 partition@ee0000 {
122 label = "config_1";
123 reg = <0xee0000 0x10000>;
124 read-only;
125 };
126
127 partition@ef0000 {
128 label = "storage";
129 reg = <0xef0000 0x100000>;
130 read-only;
131 };
132
133 partition@ff0000 {
134 label = "dump";
135 reg = <0xff0000 0x10000>;
136 read-only;
137 };
138
139 partition@1000000 {
140 label = "u-state";
141 reg = <0x1000000 0x30000>;
142 read-only;
143 };
144
145 partition@1030000 {
146 label = "u-config_res";
147 reg = <0x1030000 0x10000>;
148 read-only;
149 };
150
151 partition@1040000 {
152 label = "rf-eeprom_res";
153 reg = <0x1040000 0x10000>;
154 read-only;
155 };
156
157 partition@1050000 {
158 label = "firmware_2";
159 reg = <0x1050000 0xe90000>;
160 read-only;
161 };
162
163 partition@1ee0000 {
164 label = "config_2";
165 reg = <0x1ee0000 0x10000>;
166 read-only;
167 };
168 };
169 };
170 };
171
172 &ehci {
173 status = "okay";
174 };
175
176 &ohci {
177 status = "okay";
178 };
179
180 &ethernet {
181 mtd-mac-address = <&factory 0x4>;
182 };
183
184 &esw {
185 mediatek,portmap = <0x3e>;
186 };
187
188 &wmac {
189 status = "okay";
190 };
191
192 &pcie {
193 status = "okay";
194 };
195
196 &pcie0 {
197 mt76@0,0 {
198 reg = <0x0000 0 0 0 0>;
199 mediatek,mtd-eeprom = <&factory 0x8000>;
200 ieee80211-freq-limit = <5000000 6000000>;
201 };
202 };
203
204 &state_default {
205 gpio {
206 ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
207 ralink,function = "gpio";
208 };
209 };