ramips: move compatible for Ubiquiti Edgerouter X to DTS file
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / rt3883_trendnet_tew-692gr.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
10 model = "TRENDnet TEW-692GR";
11
12 aliases {
13 led-boot = &led_wps_green;
14 led-failsafe = &led_wps_green;
15 led-running = &led_wps_green;
16 led-upgrade = &led_wps_green;
17 };
18
19 nor-flash@1c000000 {
20 compatible = "cfi-flash";
21 reg = <0x1c000000 0x800000>;
22 bank-width = <2>;
23
24 partitions {
25 compatible = "fixed-partitions";
26 #address-cells = <1>;
27 #size-cells = <1>;
28
29 partition@0 {
30 reg = <0x0 0x0030000>;
31 label = "u-boot";
32 read-only;
33 };
34
35 partition@30000 {
36 reg = <0x00030000 0x00010000>;
37 label = "u-boot-env";
38 read-only;
39 };
40
41 factory: partition@40000 {
42 reg = <0x00040000 0x00010000>;
43 label = "factory";
44 read-only;
45 };
46
47 partition@50000 {
48 compatible = "denx,uimage";
49 reg = <0x00050000 0x007b0000>;
50 label = "firmware";
51 };
52 };
53 };
54
55 keys {
56 compatible = "gpio-keys-polled";
57 poll-interval = <100>;
58
59 reset {
60 label = "reset";
61 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_RESTART>;
63 };
64
65 wps {
66 label = "wps";
67 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_WPS_BUTTON>;
69 };
70 };
71
72 leds {
73 compatible = "gpio-leds";
74
75 wps {
76 label = "tew-692gr:orange:wps";
77 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
78 };
79
80 led_wps_green: wps2 {
81 label = "tew-692gr:green:wps";
82 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
83 };
84 };
85 };
86
87 &gpio1 {
88 status = "okay";
89 };
90
91 &state_default {
92 gpio {
93 ralink,group = "spi", "i2c", "jtag", "uartf";
94 ralink,function = "gpio";
95 };
96 };
97
98 &ethernet {
99 status = "okay";
100 mtd-mac-address = <&factory 0x4>;
101
102 port@0 {
103 phy-handle = <&phy0>;
104 phy-mode = "rgmii";
105 };
106
107 mdio-bus {
108 status = "okay";
109
110 phy0: ethernet-phy@0 {
111 reg = <0>;
112 phy-mode = "rgmii";
113
114 qca,ar8327-initvals = <
115 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
116 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
117 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
118 0x50 0xc437c437 /* LED Control Register 0 */
119 0x54 0xc337c337 /* LED Control Register 1 */
120 0x58 0x00000000 /* LED Control Register 2 */
121 0x5c 0x03ffff00 /* LED Control Register 3 */
122 0x7c 0x0000007e /* PORT0_STATUS */
123 0x94 0x0000007e /* PORT6 STATUS */
124 >;
125 };
126 };
127 };
128
129 &pci {
130 status = "okay";
131 };
132
133 &pci1 {
134 status = "okay";
135
136 wifi@0,0 {
137 compatible = "pci0,0";
138 reg = < 0x10000 0 0 0 0 >;
139 ralink,2ghz = <0>;
140 };
141 };
142
143 &wmac {
144 status = "okay";
145 ralink,mtd-eeprom = <&factory 0x0>;
146 ralink,5ghz = <0>;
147 mtd-mac-address = <&factory 0x4>;
148 mtd-mac-address-increment = <3>;
149 };