target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 [ "$ACTION" == "add" ] || exit 0
   2
   3 PHYNBR=${DEVPATH##*/phy}
   4
   5 [ -n $PHYNBR ] || exit 0
   6
   7 . /lib/functions.sh
   8 . /lib/functions/system.sh
   9
  10 board=$(board_name)
  11
  12 case "$board" in
  13         beeline,smartbox-flash)
  14                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
  15                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  16                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 26)
  17                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 27)
  18                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
  19                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
  20                 ;;
  21         cudy,x6)
  22                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  23                 macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dir-853-a3)
  26                 [ "$PHYNBR" = "0" ] && \
  27                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
  28                                 > /sys${DEVPATH}/macaddress
  29                 ;;
  30         dlink,dir-853-r1|\
  31         phicomm,k2p)
  32                 if [ "$PHYNBR" = "0" ]; then
  33                         base_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" -1)
  34                         macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
  35                 fi
  36                 ;;
  37         glinet,gl-mt1300)
  38                 [ "$PHYNBR" = "1" ] && \
  39                         macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
  40                 ;;
  41         h3c,tx1800-plus|\
  42         h3c,tx1801-plus|\
  43         h3c,tx1806)
  44                 addr=$(macaddr_setbit $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) 7)
  45                 [ "$PHYNBR" = "0" ] && echo -n ${addr:0:9}'1'${addr:10:7} > /sys${DEVPATH}/macaddress
  46                 [ "$PHYNBR" = "1" ] && echo -n ${addr:0:9}'7'${addr:10:7} > /sys${DEVPATH}/macaddress
  47                 ;;
  48         hiwifi,hc5962)
  49                 label_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
  50                 [ "$PHYNBR" = "0" ] && [ -n "$label_mac" ] && \
  51                 echo -n "$label_mac" > /sys${DEVPATH}/macaddress
  52                 [ "$PHYNBR" = "1" ] && [ -n "$label_mac" ] && \
  53                 macaddr_unsetbit "$label_mac" 6 > /sys${DEVPATH}/macaddress
  54                 ;;
  55         iptime,a3002mesh|\
  56         iptime,a3004t)
  57                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  58                 [ "$PHYNBR" = "0" ] && \
  59                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  60                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  61                 ;;
  62         iptime,ax2004m)
  63                 if [ "$PHYNBR" = "1" ]; then
  64                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  65                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  66                 fi
  67                 ;;
  68         jcg,q20)
  69                 [ "$PHYNBR" = "1" ] && \
  70                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
  71                 ;;
  72         jcg,y2)
  73                 [ "$PHYNBR" = "1" ] && \
  74                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
  75                 ;;
  76         linksys,e5600|\
  77         linksys,ea6350-v4|\
  78         linksys,ea7300-v1|\
  79         linksys,ea7300-v2|\
  80         linksys,ea7500-v2|\
  81         linksys,ea8100-v1|\
  82         linksys,ea8100-v2)
  83                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  84                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  85                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  86                 ;;
  87         belkin,rt1800|\
  88         linksys,e7350)
  89                 hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
  90                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  91                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  92                 ;;
  93         netgear,wax202)
  94                 hw_mac_addr=$(mtd_get_mac_ascii Config mac)
  95                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  96                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
  97                 ;;
  98         mts,wg430223)
  99                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
 100                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 101                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 26)
 102                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 27)
 103                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
 104                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
 105                 ;;
 106         oraybox,x3a)
 107                 if [ "$PHYNBR" = "1" ]; then
 108                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 109                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
 110                 fi
 111                 ;;
 112         raisecom,msg1500-x-00)
 113                 [ "$PHYNBR" = "0" ] && \
 114                         macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
 115                                 > /sys${DEVPATH}/macaddress
 116                 ;;
 117         tenbay,t-mb5eu-v01)
 118                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 119                 [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 120                 ;;
 121         tplink,eap615-wall-v1)
 122                 hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
 123                 macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
 124                 ;;
 125         yuncore,ax820)
 126                 [ "$PHYNBR" = "1" ] && \
 127                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
 128                 ;;
 129         yuncore,fap640|\
 130         yuncore,fap690)
 131                 hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
 132                 [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 133                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 134                 ;;
 135         zyxel,nwa50ax|\
 136         zyxel,nwa55axe)
 137                 hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
 138                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 139                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 140                 ;;
 141 esac