# to satisfy the boot loader on the device. The zImage is
# the only real content.
define Build/dns313-images
- if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
- mkdir -p $(BIN_DIR)/.boot
- echo "dummy" > $(BIN_DIR)/.boot/dummyfile
- dns313-header $(BIN_DIR)/.boot/dummyfile \
- $(BIN_DIR)/.boot/rootfs.tgz
- dns313-header $(BIN_DIR)/.boot/dummyfile \
- $(BIN_DIR)/.boot/rd.gz
+ mkdir -p $@.tmp/.boot
+
+ echo "dummy" > $@.tmp/dummyfile
+
+ dns313-header $@.tmp/dummyfile \
+ $@.tmp/.boot/rootfs.tgz
+ dns313-header $@.tmp/dummyfile \
+ $@.tmp/.boot/rd.gz
dns313-header $(IMAGE_KERNEL) \
- $(BIN_DIR)/.boot/zImage
- rm -f $(BIN_DIR)/.boot/dummyfile
- (cd $(BIN_DIR); tar -czf $@ .boot)
- if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
+ $@.tmp/.boot/zImage
+
+ tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ \
+ -C $@.tmp .boot \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)")
+
+ rm -rf $@.tmp
+endef
+
+define Build/wiligear-image
+ $(STAGING_DIR_HOST)/bin/mkfwimage2 \
+ -m GEOS -f 0x30000000 -z \
+ -v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
+ -p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
+ -p Ramdisk:0x120000:0x500000:0:0:$@ \
+ -o $@.new
+
+ mv $@.new $@
endef
# Create the special NAS4220B and Itian Square One SQ201 image
# there when using OpenWRT. We just use that to create the
# "sysupgrade" firmware image.
define Build/nas4220b-sq201-images
- rm -rf $@-tmp
- mkdir -p $@-tmp
- dd if=$(IMAGE_ROOTFS) of=$@-tmp/rd.gz bs=6144k conv=sync
- dd if=/dev/zero of=$@-tmp/hddapp.tgz bs=6144k count=1
- cp $(IMAGE_KERNEL) $@-tmp/zImage
- cp ./ImageInfo-$(1) $@-tmp/ImageInfo
- (cd $@-tmp; tar --owner=0 --group=0 --numeric-owner --mtime=@$(SOURCE_DATE_EPOCH) \
- -czf $@ ImageInfo zImage rd.gz hddapp.tgz)
- rm -rf $@-tmp
+ mkdir -p $@.tmp
+
+ mv $@ $@.tmp/rd.gz
+ dd if=/dev/zero of=$@.tmp/hddapp.tgz bs=6144k count=1
+ cp $(IMAGE_KERNEL) $@.tmp/zImage
+ cp ./ImageInfo-$(1) $@.tmp/ImageInfo
+
+ sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
+
+ (cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
+
+ rm -rf $@.tmp
endef
# WBD-111 and WBD-222:
# All DTB files are prefixed with "gemini-"
define Device/Default
PROFILES := Default
- DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb
- FILESYSTEMS := squashfs
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
BLOCKSIZE := 128k
- PAGESIZE := 2048
endef
# A reasonable set of default packages handling the NAS type
kmod-nls-utf8 kmod-usb-storage-extras \
samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
-define Device/dlink-dir-685
+define Device/dlink_dir-685
DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
+ DEVICE_DTS := gemini-dlink-dir-685
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
kmod-switch-rtl8366rb swconfig \
- rt2800-pci
- IMAGES := fwupdate.bin
- IMAGE/fwupdate.bin := dir685-images
+ kmod-rt2800-pci
+ IMAGES := factory.bin
+ IMAGE/factory.bin := dir685-images
endef
-TARGET_DEVICES += dlink-dir-685
+TARGET_DEVICES += dlink_dir-685
-define Device/dlink-dns-313
+define Device/dlink_dns-313
DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
+ DEVICE_DTS := gemini-dlink-dns-313
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
- IMAGES := dns313-bootpart.tar.gz
- IMAGE/dns313-bootpart.tar.gz := dns313-images
-endef
-TARGET_DEVICES += dlink-dns-313
-
-define Device/nas4220b-sq201
- ARTIFACTS := zImage
- ARTIFACT/zImage := append-kernel
- IMAGES += rd.gz sysupgrade.tar.gz
- IMAGE/rd.gz := append-rootfs | pad-to 6144k
- IMAGE/sysupgrade.tar.gz := nas4220b-sq201-images $(1)
- DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
-endef
-
-define Device/nas4220b
- $(Device/nas4220b-sq201)
- DEVICE_TITLE := Raidsonic NAS IB-4220-B
+ IMAGES := factory.bin
+ IMAGE/factory.bin := dns313-images
endef
-TARGET_DEVICES += nas4220b
+TARGET_DEVICES += dlink_dns-313
-define Device/rut1xx
- DEVICE_TITLE := Teltonika RUT1xx
+define Device/itian-raidsonic
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
+ nas4220b-sq201-images $(1)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
endef
-TARGET_DEVICES += rut1xx
-define Device/sq201
- $(Device/nas4220b-sq201)
+define Device/itian_sq201
+ $(Device/itian-raidsonic)
DEVICE_TITLE := ITian Square One SQ201
- DEVICE_PACKAGES += rt61-pci usb2-pci
+ DEVICE_DTS := gemini-sq201
+ DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
endef
-TARGET_DEVICES += sq201
+TARGET_DEVICES += itian_sq201
-define Device/wbd111
+define Device/raidsonic_ib-4220-b
+ $(Device/itian-raidsonic)
+ DEVICE_TITLE := Raidsonic NAS IB-4220-B
+ DEVICE_DTS := gemini-nas4220b
+endef
+TARGET_DEVICES += raidsonic_ib-4220-b
+
+# The wiliboard images need some changes to be functional and buildable.
+#
+# The dts would need to use the ecoscentric,redboot-fis-partitions partition
+# parser to get the correct partition offsets and size.
+#
+# The mkfwimage2 call need to be adjusted to reflect the real size of kernel
+# and rootfs. It is expected that the OEM firmware adjusts the on flash
+# partition table with the values defined in the image header.
+define Device/wiliboard_wbd111
DEVICE_TITLE := Wiliboard WBD-111
+ DEVICE_DTS := gemini-wbd111
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
endef
-TARGET_DEVICES += wbd111
-define Device/wbd222
+define Device/wiliboard_wbd222
DEVICE_TITLE := Wiliboard WBD-222
+ DEVICE_DTS := gemini-wbd222
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
endef
-TARGET_DEVICES += wbd222
$(eval $(call BuildImage))