lantiq: generate switch configuration for BTHOMEHUBV2B.

[openwrt/staging/wigyori.git] / target / linux / lantiq / base-files / etc / board.d / 02_network

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 989dbf32a61c220fc6d2360f8c1317cdbe9f7b33..1bdd57a8a14d4d6af0019883a0930fd8c7c6cbe8 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -47,16 +47,14 @@ ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
 
 # rtl8306g
 ARV7506PW11)
-       lan_mac=$(mtd_get_mac_binary board_config 22)
-       wan_mac=$(macaddr_add "$lan_mac" 2)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
        ucidef_add_switch "switch0" \
                "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
        ;;
 
 # rtl8306g
 ARV7519PW)
-       lan_mac=$(mtd_get_mac_binary board_config 22)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
        ;;
@@ -103,49 +101,50 @@ P2812HNUF*)
        ;;
 
 TDW8970|TDW8980)
-       lan_mac=$(mtd_get_mac_binary boardconfig 61696)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
        ;;
 
 VR200v)
-       lan_mac=$(mtd_get_mac_binary romfile 61696)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
        ;;
 
 ARV7519RW22)
-       lan_mac=$(mtd_get_mac_binary boardconfig 22)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
        ;;
 
-BTHOMEHUBV2B|BTHOMEHUBV3A)
+BTHOMEHUBV2B)
+       lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
+       ;;
+
+BTHOMEHUBV3A)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan 'eth0'
        ;;
 
 BTHOMEHUBV5A)
-       lan_mac=$(mtd_get_mac_binary caldata 4364)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
        ;;
 
 VGV7519)
-       lan_mac=$(mtd_get_mac_binary board_config 22)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
        ucidef_add_switch "switch0" \
                "4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
        ;;
 
 VGV7510KW22)
-       lan_mac=$(mtd_get_mac_binary board_config 22)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
        ucidef_add_switch "switch0" \
                "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
        ;;