+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART=y
-# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_MVEBU_PWM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LIBFDT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVSW61XX_PHY=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PWM=y
-# CONFIG_PWM_FSL_FTM is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_STATS=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_MVEBU_PWM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVSW61XX_PHY=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PWM=y
-# CONFIG_PWM_FSL_FTM is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SRCU=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_STATS=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 16 Feb 2015 13:31:04 +0100
-Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support
-
-The Linksys WRT1900AC (Mamba) is a router that has
-
-- 2 mini-PCIe slots with Marvell 88W8864 radios
-- 1 USB 3.0 port
-- 1 USB 2.0/eSATAp port
-- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN)
-- 128MB NAND flash
-- 256MB RAM
-
-gregory.clement@free-electrons.com: - add ARM to the title
- - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
- - fix the unbalanced comment for the syscfg partition
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++
- 2 files changed, 349 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-lenovo-ix4-300d.dtb \
-+ armada-xp-linksys-mamba.dtb \
- armada-xp-matrix.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -0,0 +1,348 @@
-+/*
-+ * Device Tree file for the Linksys WRT1900AC (Mamba).
-+ *
-+ * Note: this board is shipped with a new generation boot loader that
-+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
-+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
-+ * used.
-+ *
-+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Based on armada-xp-axpwifiap.dts:
-+ *
-+ * Copyright (C) 2013 Marvell
-+ *
-+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include "armada-xp-mv78230.dtsi"
-+
-+/ {
-+ model = "Linksys WRT1900AC";
-+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-+ "marvell,armadaxp", "marvell,armada-370-xp";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ stdout-path = &uart0;
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
-+ };
-+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-+
-+ pcie-controller {
-+ status = "okay";
-+
-+ /* Etron EJ168 USB 3.0 controller */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ /* First mini-PCIe port */
-+ pcie@2,0 {
-+ /* Port 0, Lane 1 */
-+ status = "okay";
-+ };
-+
-+ /* Second mini-PCIe port */
-+ pcie@3,0 {
-+ /* Port 0, Lane 3 */
-+ status = "okay";
-+ };
-+ };
-+
-+ internal-regs {
-+
-+ /* J10: VCC, NC, RX, NC, TX, GND */
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ sata@a0000 {
-+ nr-ports = <1>;
-+ status = "okay";
-+ };
-+
-+ ethernet@70000 {
-+ pinctrl-0 = <&ge0_rgmii_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ ethernet@74000 {
-+ pinctrl-0 = <&ge1_rgmii_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ /* USB part of the eSATA/USB 2.0 port */
-+ usb@50000 {
-+ status = "okay";
-+ };
-+
-+ i2c@11000 {
-+ status = "okay";
-+ clock-frequency = <100000>;
-+
-+ tmp421@4c {
-+ compatible = "ti,tmp421";
-+ reg = <0x4c>;
-+ };
-+
-+ tlc59116@68 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ #gpio-cells = <2>;
-+ compatible = "ti,tlc59116";
-+ reg = <0x68>;
-+
-+ wan_amber@0 {
-+ label = "mamba:amber:wan";
-+ reg = <0x0>;
-+ };
-+
-+ wan_white@1 {
-+ label = "mamba:white:wan";
-+ reg = <0x1>;
-+ };
-+
-+ wlan_2g@2 {
-+ label = "mamba:white:wlan_2g";
-+ reg = <0x2>;
-+ };
-+
-+ wlan_5g@3 {
-+ label = "mamba:white:wlan_5g";
-+ reg = <0x3>;
-+ };
-+
-+ esata@4 {
-+ label = "mamba:white:esata";
-+ reg = <0x4>;
-+ };
-+
-+ usb2@5 {
-+ label = "mamba:white:usb2";
-+ reg = <0x5>;
-+ };
-+
-+ usb3_1@6 {
-+ label = "mamba:white:usb3_1";
-+ reg = <0x6>;
-+ };
-+
-+ usb3_2@7 {
-+ label = "mamba:white:usb3_2";
-+ reg = <0x7>;
-+ };
-+
-+ wps_white@8 {
-+ label = "mamba:white:wps";
-+ reg = <0x8>;
-+ };
-+
-+ wps_amber@9 {
-+ label = "mamba:amber:wps";
-+ reg = <0x9>;
-+ };
-+ };
-+ };
-+
-+ nand@d0000 {
-+ status = "okay";
-+ num-cs = <1>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>; /* 1MB */
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "u_env";
-+ reg = <0x100000 0x40000>; /* 256KB */
-+ };
-+
-+ partition@140000 {
-+ label = "s_env";
-+ reg = <0x140000 0x40000>; /* 256KB */
-+ };
-+
-+ partition@900000 {
-+ label = "devinfo";
-+ reg = <0x900000 0x100000>; /* 1MB */
-+ read-only;
-+ };
-+
-+ /* kernel1 overlaps with rootfs1 by design */
-+ partition@a00000 {
-+ label = "kernel1";
-+ reg = <0xa00000 0x2800000>; /* 40MB */
-+ };
-+
-+ partition@d00000 {
-+ label = "rootfs1";
-+ reg = <0xd00000 0x2500000>; /* 37MB */
-+ };
-+
-+ /* kernel2 overlaps with rootfs2 by design */
-+ partition@3200000 {
-+ label = "kernel2";
-+ reg = <0x3200000 0x2800000>; /* 40MB */
-+ };
-+
-+ partition@3500000 {
-+ label = "rootfs2";
-+ reg = <0x3500000 0x2500000>; /* 37MB */
-+ };
-+
-+ /*
-+ * 38MB, last MB is for the BBT, not writable
-+ */
-+ partition@5a00000 {
-+ label = "syscfg";
-+ reg = <0x5a00000 0x2600000>;
-+ };
-+
-+ /*
-+ * Unused area between "s_env" and "devinfo".
-+ * Moved here because otherwise the renumbered
-+ * partitions would break the bootloader
-+ * supplied bootargs
-+ */
-+ partition@180000 {
-+ label = "unused_area";
-+ reg = <0x180000 0x780000>; /* 7.5MB */
-+ };
-+ };
-+
-+ spi0: spi@10600 {
-+ status = "okay";
-+
-+ spi-flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "everspin,mr25h256";
-+ reg = <0>; /* Chip select 0 */
-+ spi-max-frequency = <40000000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&keys_pin>;
-+ pinctrl-names = "default";
-+
-+ button@1 {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button@2 {
-+ label = "Factory Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&power_led_pin>;
-+ pinctrl-names = "default";
-+
-+ power {
-+ label = "mamba:white:power";
-+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ gpio_fan {
-+ /* SUNON HA4010V4-0000-C99 */
-+ compatible = "gpio-fan";
-+ gpios = <&gpio0 24 0>;
-+
-+ gpio-fan,speed-map = <0 0
-+ 4500 1>;
-+ };
-+};
-+
-+&pinctrl {
-+
-+ keys_pin: keys-pin {
-+ marvell,pins = "mpp32", "mpp33";
-+ marvell,function = "gpio";
-+ };
-+
-+ power_led_pin: power-led-pin {
-+ marvell,pins = "mpp40";
-+ marvell,function = "gpio";
-+ };
-+
-+ gpio_fan_pin: gpio-fan-pin {
-+ marvell,pins = "mpp24";
-+ marvell,function = "gpio";
-+ };
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -84,12 +84,100 @@
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -415,6 +415,16 @@
- gpio-fan,speed-map = <0 0
- 4500 1>;
- };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6172";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ };
- };
-
- &pinctrl {
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -183,6 +183,11 @@
-
- internal-regs {
-
-+ rtc@10300 {
-+ /* No crystal connected to the internal RTC */
-+ status = "disabled";
-+ };
-+
- /* J10: VCC, NC, RX, NC, TX, GND */
- serial@12000 {
- status = "okay";
+++ /dev/null
-From a9ce1afb35317d2a0646c7530f0ae9822c93cd69 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Mon, 6 Oct 2014 11:37:56 +0200
-Subject: ARM: mvebu: Fix the Aurora L2 cache node with the required
- cache-unified property
-
-The L2 cache controller on the Armada 370 and Armada XP SoCs is a
-unified cache. Moreover, the Aurora cache controller is compatible
-with the L2x0 cache controller: the "cache-unified" property is
-required by its binding.
-
-This patch fixes the Aurora L2 cache node for the Armada 370 and
-Armada XP SoCs by adding this property.
-
-Reported-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Link: https://lkml.kernel.org/r/1412588276-4514-1-git-send-email-gregory.clement@free-electrons.com
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -95,6 +95,7 @@
- compatible = "marvell,aurora-outer-cache";
- reg = <0x08000 0x1000>;
- cache-id-part = <0x100>;
-+ cache-unified;
- wt-override;
- };
-
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -39,6 +39,7 @@
- compatible = "marvell,aurora-system-cache";
- reg = <0x08000 0x1000>;
- cache-id-part = <0x100>;
-+ cache-unified;
- wt-override;
- };
-
+++ /dev/null
-From b324fa60ac94b9c00c59f621743715c036d134fa Mon Sep 17 00:00:00 2001
-From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Date: Fri, 19 Sep 2014 21:07:09 +0200
-Subject: ARM: mvebu: armada-xp: Consolidate pinctrl node
-
-All current Armada XP SoCs have their pin controller at 0x18000/0x38.
-Move the common properties of pinctrl nodes to armada-xp.dtsi to allow
-to share pinctrl settings later.
-
-Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Tested-By: Benoit Masson <yahoo@perenite.com>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -169,13 +169,6 @@
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78230-pinctrl";
-- reg = <0x18000 0x38>;
--
-- sdio_pins: sdio-pins {
-- marvell,pins = "mpp30", "mpp31", "mpp32",
-- "mpp33", "mpp34", "mpp35";
-- marvell,function = "sd0";
-- };
- };
-
- gpio0: gpio@18100 {
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -253,13 +253,6 @@
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78260-pinctrl";
-- reg = <0x18000 0x38>;
--
-- sdio_pins: sdio-pins {
-- marvell,pins = "mpp30", "mpp31", "mpp32",
-- "mpp33", "mpp34", "mpp35";
-- marvell,function = "sd0";
-- };
- };
-
- gpio0: gpio@18100 {
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -291,13 +291,6 @@
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78460-pinctrl";
-- reg = <0x18000 0x38>;
--
-- sdio_pins: sdio-pins {
-- marvell,pins = "mpp30", "mpp31", "mpp32",
-- "mpp33", "mpp34", "mpp35";
-- marvell,function = "sd0";
-- };
- };
-
- gpio0: gpio@18100 {
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -72,6 +72,16 @@
- status = "disabled";
- };
-
-+ pinctrl {
-+ reg = <0x18000 0x38>;
-+
-+ sdio_pins: sdio-pins {
-+ marvell,pins = "mpp30", "mpp31", "mpp32",
-+ "mpp33", "mpp34", "mpp35";
-+ marvell,function = "sd0";
-+ };
-+ };
-+
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x500>;
+++ /dev/null
-From 264a05e19bf50f93f1a377e16497a626ae9f931e Mon Sep 17 00:00:00 2001
-From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Date: Fri, 19 Sep 2014 21:12:00 +0200
-Subject: ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address
-
-In other MVEBU SoCs, the pin controller node is called pin-ctrl with
-its base address added. Also, we have a node alias to access the pinctrl
-node easily. Fix this for Armada XP pinctrl nodes to be consistent with
-other SoCs.
-
-Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Tested-By: Benoit Masson <yahoo@perenite.com>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -60,7 +60,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- pinctrl-0 = <&pmx_phy_int>;
- pinctrl-names = "default";
-
---- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
-+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
-@@ -51,7 +51,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- poweroff_pin: poweroff-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -167,7 +167,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- compatible = "marvell,mv78230-pinctrl";
- };
-
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -251,7 +251,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- compatible = "marvell,mv78260-pinctrl";
- };
-
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -289,7 +289,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- compatible = "marvell,mv78460-pinctrl";
- };
-
---- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
-+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
-@@ -55,7 +55,7 @@
- };
-
- internal-regs {
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- poweroff: poweroff {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-@@ -81,7 +81,7 @@
- serial@12100 {
- status = "okay";
- };
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- led_pins: led-pins-0 {
- marvell,pins = "mpp49", "mpp51", "mpp53";
- marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -72,7 +72,7 @@
- status = "disabled";
- };
-
-- pinctrl {
-+ pinctrl: pin-ctrl@18000 {
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
+++ /dev/null
-From 01c434225ee67388711e78166cfe9b159e34fc9d Mon Sep 17 00:00:00 2001
-From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Date: Fri, 19 Sep 2014 21:20:09 +0200
-Subject: ARM: mvebu: armada-xp: Use pinctrl node alias
-
-Armada XP pinctrl node gained an alias, make use of it.
-
-Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Tested-By: Benoit Masson <yahoo@perenite.com>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -60,40 +60,6 @@
- };
-
- internal-regs {
-- pinctrl: pin-ctrl@18000 {
-- pinctrl-0 = <&pmx_phy_int>;
-- pinctrl-names = "default";
--
-- pmx_ge0: pmx-ge0 {
-- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-- "mpp4", "mpp5", "mpp6", "mpp7",
-- "mpp8", "mpp9", "mpp10", "mpp11";
-- marvell,function = "ge0";
-- };
--
-- pmx_ge1: pmx-ge1 {
-- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-- "mpp16", "mpp17", "mpp18", "mpp19",
-- "mpp20", "mpp21", "mpp22", "mpp23";
-- marvell,function = "ge1";
-- };
--
-- pmx_keys: pmx-keys {
-- marvell,pins = "mpp33";
-- marvell,function = "gpio";
-- };
--
-- pmx_spi: pmx-spi {
-- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-- marvell,function = "spi";
-- };
--
-- pmx_phy_int: pmx-phy-int {
-- marvell,pins = "mpp32";
-- marvell,function = "gpio";
-- };
-- };
--
- serial@12000 {
- status = "okay";
- };
-@@ -162,3 +128,37 @@
- };
- };
- };
-+
-+&pinctrl {
-+ pinctrl-0 = <&pmx_phy_int>;
-+ pinctrl-names = "default";
-+
-+ pmx_ge0: pmx-ge0 {
-+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-+ "mpp4", "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10", "mpp11";
-+ marvell,function = "ge0";
-+ };
-+
-+ pmx_ge1: pmx-ge1 {
-+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-+ "mpp16", "mpp17", "mpp18", "mpp19",
-+ "mpp20", "mpp21", "mpp22", "mpp23";
-+ marvell,function = "ge1";
-+ };
-+
-+ pmx_keys: pmx-keys {
-+ marvell,pins = "mpp33";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_spi: pmx-spi {
-+ marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-+ marvell,function = "spi";
-+ };
-+
-+ pmx_phy_int: pmx-phy-int {
-+ marvell,pins = "mpp32";
-+ marvell,function = "gpio";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
-+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
-@@ -51,37 +51,6 @@
- };
-
- internal-regs {
-- pinctrl: pin-ctrl@18000 {
-- poweroff_pin: poweroff-pin {
-- marvell,pins = "mpp24";
-- marvell,function = "gpio";
-- };
--
-- power_button_pin: power-button-pin {
-- marvell,pins = "mpp44";
-- marvell,function = "gpio";
-- };
--
-- reset_button_pin: reset-button-pin {
-- marvell,pins = "mpp45";
-- marvell,function = "gpio";
-- };
-- select_button_pin: select-button-pin {
-- marvell,pins = "mpp41";
-- marvell,function = "gpio";
-- };
--
-- scroll_button_pin: scroll-button-pin {
-- marvell,pins = "mpp42";
-- marvell,function = "gpio";
-- };
--
-- hdd_led_pin: hdd-led-pin {
-- marvell,pins = "mpp26";
-- marvell,function = "gpio";
-- };
-- };
--
- serial@12000 {
- status = "okay";
- };
-@@ -282,3 +251,34 @@
- gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
- };
- };
-+
-+&pinctrl {
-+ poweroff_pin: poweroff-pin {
-+ marvell,pins = "mpp24";
-+ marvell,function = "gpio";
-+ };
-+
-+ power_button_pin: power-button-pin {
-+ marvell,pins = "mpp44";
-+ marvell,function = "gpio";
-+ };
-+
-+ reset_button_pin: reset-button-pin {
-+ marvell,pins = "mpp45";
-+ marvell,function = "gpio";
-+ };
-+ select_button_pin: select-button-pin {
-+ marvell,pins = "mpp41";
-+ marvell,function = "gpio";
-+ };
-+
-+ scroll_button_pin: scroll-button-pin {
-+ marvell,pins = "mpp42";
-+ marvell,function = "gpio";
-+ };
-+
-+ hdd_led_pin: hdd-led-pin {
-+ marvell,pins = "mpp26";
-+ marvell,function = "gpio";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -167,10 +167,6 @@
- };
-
- internal-regs {
-- pinctrl: pin-ctrl@18000 {
-- compatible = "marvell,mv78230-pinctrl";
-- };
--
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
-@@ -195,3 +191,7 @@
- };
- };
- };
-+
-+&pinctrl {
-+ compatible = "marvell,mv78230-pinctrl";
-+};
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -251,10 +251,6 @@
- };
-
- internal-regs {
-- pinctrl: pin-ctrl@18000 {
-- compatible = "marvell,mv78260-pinctrl";
-- };
--
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
-@@ -298,3 +294,7 @@
- };
- };
- };
-+
-+&pinctrl {
-+ compatible = "marvell,mv78260-pinctrl";
-+};
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -289,10 +289,6 @@
- };
-
- internal-regs {
-- pinctrl: pin-ctrl@18000 {
-- compatible = "marvell,mv78460-pinctrl";
-- };
--
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
-@@ -336,3 +332,7 @@
- };
- };
- };
-+
-+&pinctrl {
-+ compatible = "marvell,mv78460-pinctrl";
-+};
---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-@@ -81,12 +81,7 @@
- serial@12100 {
- status = "okay";
- };
-- pinctrl: pin-ctrl@18000 {
-- led_pins: led-pins-0 {
-- marvell,pins = "mpp49", "mpp51", "mpp53";
-- marvell,function = "gpio";
-- };
-- };
-+
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-@@ -191,3 +186,10 @@
- };
- };
- };
-+
-+&pinctrl {
-+ led_pins: led-pins-0 {
-+ marvell,pins = "mpp49", "mpp51", "mpp53";
-+ marvell,function = "gpio";
-+ };
-+};
+++ /dev/null
-From e59451432d7e0f7953e29c15e70111dfdbecc145 Mon Sep 17 00:00:00 2001
-From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Date: Fri, 19 Sep 2014 21:24:34 +0200
-Subject: ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII
-
-Pinctrl settings for GE0 and GE1 are not only usable on RD-AXPWiFiAP.
-Moreover, naming the RGMII settings pmx-ge{0,1} is not precise enough
-as there is also a GMII setting for GE0.
-
-Move the pinctrl sub-nodes to the common pinctrl node and rename them
-to pmx-ge{0,1}-rgmii.
-
-Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Tested-By: Benoit Masson <yahoo@perenite.com>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -84,14 +84,14 @@
- };
-
- ethernet@70000 {
-- pinctrl-0 = <&pmx_ge0>;
-+ pinctrl-0 = <&pmx_ge0_rgmii>;
- pinctrl-names = "default";
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
- ethernet@74000 {
-- pinctrl-0 = <&pmx_ge1>;
-+ pinctrl-0 = <&pmx_ge1_rgmii>;
- pinctrl-names = "default";
- status = "okay";
- phy = <&phy1>;
-@@ -133,20 +133,6 @@
- pinctrl-0 = <&pmx_phy_int>;
- pinctrl-names = "default";
-
-- pmx_ge0: pmx-ge0 {
-- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-- "mpp4", "mpp5", "mpp6", "mpp7",
-- "mpp8", "mpp9", "mpp10", "mpp11";
-- marvell,function = "ge0";
-- };
--
-- pmx_ge1: pmx-ge1 {
-- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-- "mpp16", "mpp17", "mpp18", "mpp19",
-- "mpp20", "mpp21", "mpp22", "mpp23";
-- marvell,function = "ge1";
-- };
--
- pmx_keys: pmx-keys {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -75,6 +75,22 @@
- pinctrl: pin-ctrl@18000 {
- reg = <0x18000 0x38>;
-
-+ pmx_ge0_rgmii: pmx-ge0-rgmii {
-+ marvell,pins =
-+ "mpp0", "mpp1", "mpp2", "mpp3",
-+ "mpp4", "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10", "mpp11";
-+ marvell,function = "ge0";
-+ };
-+
-+ pmx_ge1_rgmii: pmx-ge1-rgmii {
-+ marvell,pins =
-+ "mpp12", "mpp13", "mpp14", "mpp15",
-+ "mpp16", "mpp17", "mpp18", "mpp19",
-+ "mpp20", "mpp21", "mpp22", "mpp23";
-+ marvell,function = "ge1";
-+ };
-+
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
+++ /dev/null
-From 7254f6c52b5da38c0a79ab953d34e556fe16942f Mon Sep 17 00:00:00 2001
-From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Date: Fri, 19 Sep 2014 21:27:55 +0200
-Subject: ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII
-
-There is a GMII setting for GE0, add it to the common pinctrl node.
-
-Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Tested-By: Benoit Masson <yahoo@perenite.com>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -75,6 +75,17 @@
- pinctrl: pin-ctrl@18000 {
- reg = <0x18000 0x38>;
-
-+ pmx_ge0_gmii: pmx-ge0-gmii {
-+ marvell,pins =
-+ "mpp0", "mpp1", "mpp2", "mpp3",
-+ "mpp4", "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10", "mpp11",
-+ "mpp12", "mpp13", "mpp14", "mpp15",
-+ "mpp16", "mpp17", "mpp18", "mpp19",
-+ "mpp20", "mpp21", "mpp22", "mpp23";
-+ marvell,function = "ge0";
-+ };
-+
- pmx_ge0_rgmii: pmx-ge0-rgmii {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
+++ /dev/null
-From 181d9b28cbc9ae10e1467e2d013033b672d91d4b Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 00:45:35 +0100
-Subject: arm: mvebu: add uartX labels for Armada SoC serial nodes
-
-This patch adds uartX labels for Armada SoC serial nodes. This is
-a preliminary work to be able to easily reference the serial lines
-in Device Tree files. One expected use is when providing stdout-path
-property for barebox.
-
-Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Acked-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/0683d1a823fe9b75849f3dafcf1cf6ee291cdca6.1416613429.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -151,7 +151,7 @@
- status = "disabled";
- };
-
-- serial@12000 {
-+ uart0: serial@12000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
-@@ -160,7 +160,8 @@
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-- serial@12100 {
-+
-+ uart1: serial@12100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -53,7 +53,7 @@
- reg = <0x11100 0x100>;
- };
-
-- serial@12200 {
-+ uart2: serial@12200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x12200 0x100>;
- reg-shift = <2>;
-@@ -62,7 +62,8 @@
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-- serial@12300 {
-+
-+ uart3: serial@12300 {
- compatible = "snps,dw-apb-uart";
- reg = <0x12300 0x100>;
- reg-shift = <2>;
+++ /dev/null
-From 4904a82a9399d037588162e6fb4b293fa6a37f7c Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 00:45:56 +0100
-Subject: arm: mvebu: move Armada 370/XP pinctrl node definition
- armada-370-xp.dtsi
-
-What was done by Sebastian in 264a05e19bf5 ("ARM: mvebu: armada-xp:
-Add node alias to pinctrl and add base address") and 01c434225ee6
-("ARM: mvebu: armada-xp: Use pinctrl node alias") can also be done for
-Armada 370, i.e.
-
- - Rename Armada 370 pinctrl node to pin-ctrl with its address encoded
- - Add a node alias to access the pinctrl node easily.
- - use the newly available alias in existing Armada 370 .dts files
-
-We can even go a bit further by putting the pinctrl node definition in
-armada-370-xp.dtsi, with only its reg property defined. This allows us
-to then also use the newly defined node alias in armada-xp.dtsi,
-armada-370.dtsi.
-
-Suggested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/b54eb45e5242728aace3ce8aef2eae4251f8dea3.1416613429.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-370-db.dts
-+++ b/arch/arm/boot/dts/armada-370-db.dts
-@@ -157,3 +157,27 @@
- compatible = "linux,spdif-dir";
- };
- };
-+
-+&pinctrl {
-+ /*
-+ * These pins might be muxed as I2S by
-+ * the bootloader, but it conflicts
-+ * with the real I2S pins that are
-+ * muxed using i2s_pins. We must mux
-+ * those pins to a function other than
-+ * I2S.
-+ */
-+ pinctrl-0 = <&hog_pins1 &hog_pins2>;
-+ pinctrl-names = "default";
-+
-+ hog_pins1: hog-pins1 {
-+ marvell,pins = "mpp6", "mpp8", "mpp10",
-+ "mpp12", "mpp13";
-+ marvell,function = "gpio";
-+ };
-+
-+ hog_pins2: hog-pins2 {
-+ marvell,pins = "mpp5", "mpp7", "mpp9";
-+ marvell,function = "gpo";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-370-mirabox.dts
-+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
-@@ -54,18 +54,6 @@
- status = "okay";
- };
-
-- pinctrl {
-- pwr_led_pin: pwr-led-pin {
-- marvell,pins = "mpp63";
-- marvell,function = "gpo";
-- };
--
-- stat_led_pins: stat-led-pins {
-- marvell,pins = "mpp64", "mpp65";
-- marvell,function = "gpio";
-- };
-- };
--
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-@@ -169,3 +157,16 @@
- };
- };
- };
-+
-+&pinctrl {
-+ pwr_led_pin: pwr-led-pin {
-+ marvell,pins = "mpp63";
-+ marvell,function = "gpo";
-+ };
-+
-+ stat_led_pins: stat-led-pins {
-+ marvell,pins = "mpp64", "mpp65";
-+ marvell,function = "gpio";
-+ };
-+};
-+
---- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
-+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
-@@ -58,48 +58,6 @@
- status = "okay";
- };
-
-- pinctrl {
-- power_led_pin: power-led-pin {
-- marvell,pins = "mpp57";
-- marvell,function = "gpio";
-- };
--
-- sata1_led_pin: sata1-led-pin {
-- marvell,pins = "mpp15";
-- marvell,function = "gpio";
-- };
--
-- sata2_led_pin: sata2-led-pin {
-- marvell,pins = "mpp14";
-- marvell,function = "gpio";
-- };
--
-- backup_led_pin: backup-led-pin {
-- marvell,pins = "mpp56";
-- marvell,function = "gpio";
-- };
--
-- backup_button_pin: backup-button-pin {
-- marvell,pins = "mpp58";
-- marvell,function = "gpio";
-- };
--
-- power_button_pin: power-button-pin {
-- marvell,pins = "mpp62";
-- marvell,function = "gpio";
-- };
--
-- reset_button_pin: reset-button-pin {
-- marvell,pins = "mpp6";
-- marvell,function = "gpio";
-- };
--
-- poweroff: poweroff {
-- marvell,pins = "mpp8";
-- marvell,function = "gpio";
-- };
-- };
--
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-@@ -256,3 +214,45 @@
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
- };
-+
-+&pinctrl {
-+ power_led_pin: power-led-pin {
-+ marvell,pins = "mpp57";
-+ marvell,function = "gpio";
-+ };
-+
-+ sata1_led_pin: sata1-led-pin {
-+ marvell,pins = "mpp15";
-+ marvell,function = "gpio";
-+ };
-+
-+ sata2_led_pin: sata2-led-pin {
-+ marvell,pins = "mpp14";
-+ marvell,function = "gpio";
-+ };
-+
-+ backup_led_pin: backup-led-pin {
-+ marvell,pins = "mpp56";
-+ marvell,function = "gpio";
-+ };
-+
-+ backup_button_pin: backup-button-pin {
-+ marvell,pins = "mpp58";
-+ marvell,function = "gpio";
-+ };
-+
-+ power_button_pin: power-button-pin {
-+ marvell,pins = "mpp62";
-+ marvell,function = "gpio";
-+ };
-+
-+ reset_button_pin: reset-button-pin {
-+ marvell,pins = "mpp6";
-+ marvell,function = "gpio";
-+ };
-+
-+ poweroff: poweroff {
-+ marvell,pins = "mpp8";
-+ marvell,function = "gpio";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
-+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
-@@ -53,38 +53,6 @@
- status = "okay";
- };
-
-- pinctrl {
-- poweroff: poweroff {
-- marvell,pins = "mpp60";
-- marvell,function = "gpio";
-- };
--
-- backup_button_pin: backup-button-pin {
-- marvell,pins = "mpp52";
-- marvell,function = "gpio";
-- };
--
-- power_button_pin: power-button-pin {
-- marvell,pins = "mpp62";
-- marvell,function = "gpio";
-- };
--
-- backup_led_pin: backup-led-pin {
-- marvell,pins = "mpp63";
-- marvell,function = "gpo";
-- };
--
-- power_led_pin: power-led-pin {
-- marvell,pins = "mpp64";
-- marvell,function = "gpio";
-- };
--
-- reset_button_pin: reset-button-pin {
-- marvell,pins = "mpp65";
-- marvell,function = "gpio";
-- };
-- };
--
- mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-@@ -269,3 +237,35 @@
- gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
- };
- };
-+
-+&pinctrl {
-+ poweroff: poweroff {
-+ marvell,pins = "mpp60";
-+ marvell,function = "gpio";
-+ };
-+
-+ backup_button_pin: backup-button-pin {
-+ marvell,pins = "mpp52";
-+ marvell,function = "gpio";
-+ };
-+
-+ power_button_pin: power-button-pin {
-+ marvell,pins = "mpp62";
-+ marvell,function = "gpio";
-+ };
-+
-+ backup_led_pin: backup-led-pin {
-+ marvell,pins = "mpp63";
-+ marvell,function = "gpo";
-+ };
-+
-+ power_led_pin: power-led-pin {
-+ marvell,pins = "mpp64";
-+ marvell,function = "gpio";
-+ };
-+
-+ reset_button_pin: reset-button-pin {
-+ marvell,pins = "mpp65";
-+ marvell,function = "gpio";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-370-rd.dts
-+++ b/arch/arm/boot/dts/armada-370-rd.dts
-@@ -59,18 +59,6 @@
- };
-
- internal-regs {
-- pinctrl {
-- fan_pins: fan-pins {
-- marvell,pins = "mpp8";
-- marvell,function = "gpio";
-- };
--
-- led_pins: led-pins {
-- marvell,pins = "mpp32";
-- marvell,function = "gpio";
-- };
-- };
--
- serial@12000 {
- status = "okay";
- };
-@@ -174,3 +162,15 @@
- };
- };
- };
-+
-+&pinctrl {
-+ fan_pins: fan-pins {
-+ marvell,pins = "mpp8";
-+ marvell,function = "gpio";
-+ };
-+
-+ led_pins: led-pins {
-+ marvell,pins = "mpp32";
-+ marvell,function = "gpio";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -171,6 +171,10 @@
- status = "disabled";
- };
-
-+ pinctrl: pin-ctrl@18000 {
-+ reg = <0x18000 0x38>;
-+ };
-+
- coredivclk: corediv-clock@18740 {
- compatible = "marvell,armada-370-corediv-clock";
- reg = <0x18740 0xc>;
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -107,67 +107,6 @@
- reg = <0x11100 0x20>;
- };
-
-- pinctrl {
-- compatible = "marvell,mv88f6710-pinctrl";
-- reg = <0x18000 0x38>;
--
-- sdio_pins1: sdio-pins1 {
-- marvell,pins = "mpp9", "mpp11", "mpp12",
-- "mpp13", "mpp14", "mpp15";
-- marvell,function = "sd0";
-- };
--
-- sdio_pins2: sdio-pins2 {
-- marvell,pins = "mpp47", "mpp48", "mpp49",
-- "mpp50", "mpp51", "mpp52";
-- marvell,function = "sd0";
-- };
--
-- sdio_pins3: sdio-pins3 {
-- marvell,pins = "mpp48", "mpp49", "mpp50",
-- "mpp51", "mpp52", "mpp53";
-- marvell,function = "sd0";
-- };
--
-- i2c0_pins: i2c0-pins {
-- marvell,pins = "mpp2", "mpp3";
-- marvell,function = "i2c0";
-- };
--
-- i2s_pins1: i2s-pins1 {
-- marvell,pins = "mpp5", "mpp6", "mpp7",
-- "mpp8", "mpp9", "mpp10",
-- "mpp12", "mpp13";
-- marvell,function = "audio";
-- };
--
-- i2s_pins2: i2s-pins2 {
-- marvell,pins = "mpp49", "mpp47", "mpp50",
-- "mpp59", "mpp57", "mpp61",
-- "mpp62", "mpp60", "mpp58";
-- marvell,function = "audio";
-- };
--
-- mdio_pins: mdio-pins {
-- marvell,pins = "mpp17", "mpp18";
-- marvell,function = "ge";
-- };
--
-- ge0_rgmii_pins: ge0-rgmii-pins {
-- marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
-- "mpp9", "mpp10", "mpp11", "mpp12",
-- "mpp13", "mpp14", "mpp15", "mpp16";
-- marvell,function = "ge0";
-- };
--
-- ge1_rgmii_pins: ge1-rgmii-pins {
-- marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
-- "mpp23", "mpp24", "mpp25", "mpp26",
-- "mpp27", "mpp28", "mpp29", "mpp30";
-- marvell,function = "ge1";
-- };
-- };
--
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
-@@ -314,3 +253,63 @@
- };
- };
- };
-+
-+&pinctrl {
-+ compatible = "marvell,mv88f6710-pinctrl";
-+
-+ sdio_pins1: sdio-pins1 {
-+ marvell,pins = "mpp9", "mpp11", "mpp12",
-+ "mpp13", "mpp14", "mpp15";
-+ marvell,function = "sd0";
-+ };
-+
-+ sdio_pins2: sdio-pins2 {
-+ marvell,pins = "mpp47", "mpp48", "mpp49",
-+ "mpp50", "mpp51", "mpp52";
-+ marvell,function = "sd0";
-+ };
-+
-+ sdio_pins3: sdio-pins3 {
-+ marvell,pins = "mpp48", "mpp49", "mpp50",
-+ "mpp51", "mpp52", "mpp53";
-+ marvell,function = "sd0";
-+ };
-+
-+ i2c0_pins: i2c0-pins {
-+ marvell,pins = "mpp2", "mpp3";
-+ marvell,function = "i2c0";
-+ };
-+
-+ i2s_pins1: i2s-pins1 {
-+ marvell,pins = "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10",
-+ "mpp12", "mpp13";
-+ marvell,function = "audio";
-+ };
-+
-+ i2s_pins2: i2s-pins2 {
-+ marvell,pins = "mpp49", "mpp47", "mpp50",
-+ "mpp59", "mpp57", "mpp61",
-+ "mpp62", "mpp60", "mpp58";
-+ marvell,function = "audio";
-+ };
-+
-+ mdio_pins: mdio-pins {
-+ marvell,pins = "mpp17", "mpp18";
-+ marvell,function = "ge";
-+ };
-+
-+ ge0_rgmii_pins: ge0-rgmii-pins {
-+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
-+ "mpp9", "mpp10", "mpp11", "mpp12",
-+ "mpp13", "mpp14", "mpp15", "mpp16";
-+ marvell,function = "ge0";
-+ };
-+
-+ ge1_rgmii_pins: ge1-rgmii-pins {
-+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
-+ "mpp23", "mpp24", "mpp25", "mpp26",
-+ "mpp27", "mpp28", "mpp29", "mpp30";
-+ marvell,function = "ge1";
-+ };
-+};
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -73,43 +73,6 @@
- status = "disabled";
- };
-
-- pinctrl: pin-ctrl@18000 {
-- reg = <0x18000 0x38>;
--
-- pmx_ge0_gmii: pmx-ge0-gmii {
-- marvell,pins =
-- "mpp0", "mpp1", "mpp2", "mpp3",
-- "mpp4", "mpp5", "mpp6", "mpp7",
-- "mpp8", "mpp9", "mpp10", "mpp11",
-- "mpp12", "mpp13", "mpp14", "mpp15",
-- "mpp16", "mpp17", "mpp18", "mpp19",
-- "mpp20", "mpp21", "mpp22", "mpp23";
-- marvell,function = "ge0";
-- };
--
-- pmx_ge0_rgmii: pmx-ge0-rgmii {
-- marvell,pins =
-- "mpp0", "mpp1", "mpp2", "mpp3",
-- "mpp4", "mpp5", "mpp6", "mpp7",
-- "mpp8", "mpp9", "mpp10", "mpp11";
-- marvell,function = "ge0";
-- };
--
-- pmx_ge1_rgmii: pmx-ge1-rgmii {
-- marvell,pins =
-- "mpp12", "mpp13", "mpp14", "mpp15",
-- "mpp16", "mpp17", "mpp18", "mpp19",
-- "mpp20", "mpp21", "mpp22", "mpp23";
-- marvell,function = "ge1";
-- };
--
-- sdio_pins: sdio-pins {
-- marvell,pins = "mpp30", "mpp31", "mpp32",
-- "mpp33", "mpp34", "mpp35";
-- marvell,function = "sd0";
-- };
-- };
--
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x500>;
-@@ -246,3 +209,38 @@
- };
- };
- };
-+
-+&pinctrl {
-+ pmx_ge0_gmii: pmx-ge0-gmii {
-+ marvell,pins =
-+ "mpp0", "mpp1", "mpp2", "mpp3",
-+ "mpp4", "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10", "mpp11",
-+ "mpp12", "mpp13", "mpp14", "mpp15",
-+ "mpp16", "mpp17", "mpp18", "mpp19",
-+ "mpp20", "mpp21", "mpp22", "mpp23";
-+ marvell,function = "ge0";
-+ };
-+
-+ pmx_ge0_rgmii: pmx-ge0-rgmii {
-+ marvell,pins =
-+ "mpp0", "mpp1", "mpp2", "mpp3",
-+ "mpp4", "mpp5", "mpp6", "mpp7",
-+ "mpp8", "mpp9", "mpp10", "mpp11";
-+ marvell,function = "ge0";
-+ };
-+
-+ pmx_ge1_rgmii: pmx-ge1-rgmii {
-+ marvell,pins =
-+ "mpp12", "mpp13", "mpp14", "mpp15",
-+ "mpp16", "mpp17", "mpp18", "mpp19",
-+ "mpp20", "mpp21", "mpp22", "mpp23";
-+ marvell,function = "ge1";
-+ };
-+
-+ sdio_pins: sdio-pins {
-+ marvell,pins = "mpp30", "mpp31", "mpp32",
-+ "mpp33", "mpp34", "mpp35";
-+ marvell,function = "sd0";
-+ };
-+};
+++ /dev/null
-From d352f41e87e7226692d1346bb97c603615eeb817 Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 00:46:28 +0100
-Subject: arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings
-
-This patch defines common Armada XP pinctrl settings for uart2 and
-uart3 interfaces (uart0 and uart1 rx/tx do not rely on MPP):
-
- uart2: MPP42-43 as default
- uart3: MPP44-45 as default
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/fd51c080c7139a67ec01df8d797f1e88ce557796.1416613429.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -55,6 +55,8 @@
-
- uart2: serial@12200 {
- compatible = "snps,dw-apb-uart";
-+ pinctrl-0 = <&uart2_pins>;
-+ pinctrl-names = "default";
- reg = <0x12200 0x100>;
- reg-shift = <2>;
- interrupts = <43>;
-@@ -65,6 +67,8 @@
-
- uart3: serial@12300 {
- compatible = "snps,dw-apb-uart";
-+ pinctrl-0 = <&uart3_pins>;
-+ pinctrl-names = "default";
- reg = <0x12300 0x100>;
- reg-shift = <2>;
- interrupts = <44>;
-@@ -243,4 +247,14 @@
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
-+
-+ uart2_pins: uart2-pins {
-+ marvell,pins = "mpp42", "mpp43";
-+ marvell,function = "uart2";
-+ };
-+
-+ uart3_pins: uart3-pins {
-+ marvell,pins = "mpp44", "mpp45";
-+ marvell,function = "uart3";
-+ };
- };
+++ /dev/null
-From 547c653b64022618250ca9c7c30151927509ae98 Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 00:46:39 +0100
-Subject: arm: mvebu: define and use common Armada XP SPI pinctrl setting
-
-This patch defines common Armada XP pinctrl settings in armada-xp.dtsi
-for the supported SPI interface (MPP36-39) and use it as default
-for Armada XP spi interface. That being done, it removes the now
-redundant definitions in armada-xp-axpwifiap.dts.
-
-Note: this patch has the potential to break out-of-tree users w/o
-specific pinctrl settings for their spi interfaces if the default
-above does not match their config (i.e. if they do not use CS0).
-
-Acked-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -100,8 +100,6 @@
-
- spi0: spi@10600 {
- status = "okay";
-- pinctrl-0 = <&pmx_spi>;
-- pinctrl-names = "default";
-
- spi-flash@0 {
- #address-cells = <1>;
-@@ -138,11 +136,6 @@
- marvell,function = "gpio";
- };
-
-- pmx_spi: pmx-spi {
-- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-- marvell,function = "spi";
-- };
--
- pmx_phy_int: pmx-phy-int {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -43,6 +43,11 @@
- wt-override;
- };
-
-+ spi0: spi@10600 {
-+ pinctrl-0 = <&spi0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
- i2c0: i2c@11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
-@@ -248,6 +253,12 @@
- marvell,function = "sd0";
- };
-
-+ spi0_pins: spi0-pins {
-+ marvell,pins = "mpp36", "mpp37",
-+ "mpp38", "mpp39";
-+ marvell,function = "spi";
-+ };
-+
- uart2_pins: uart2-pins {
- marvell,pins = "mpp42", "mpp43";
- marvell,function = "uart2";
+++ /dev/null
-From 70ee4e9d9f054e258480fd51c90cfc2b72be8b78 Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 17:23:30 +0100
-Subject: arm: mvebu: normalize pinctrl entries for Armada SoCs
-
-There are currently 2 differents naming conventions used between the
-existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s)
-and pmx_*: pmx-*) with a vast majority of files using the former:
-
-$ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l
-155
-$ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l
-13
-
-In fact, only some Armada XP files are using the second variant.
-This patch normalizes those files (mainly ge0/1 entries) to use
-the first variant.
-
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -84,14 +84,14 @@
- };
-
- ethernet@70000 {
-- pinctrl-0 = <&pmx_ge0_rgmii>;
-+ pinctrl-0 = <&ge0_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
- ethernet@74000 {
-- pinctrl-0 = <&pmx_ge1_rgmii>;
-+ pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy = <&phy1>;
-@@ -116,7 +116,7 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- pinctrl-0 = <&pmx_keys>;
-+ pinctrl-0 = <&keys_pin>;
- pinctrl-names = "default";
-
- button@1 {
-@@ -128,15 +128,15 @@
- };
-
- &pinctrl {
-- pinctrl-0 = <&pmx_phy_int>;
-+ pinctrl-0 = <&phy_int_pin>;
- pinctrl-names = "default";
-
-- pmx_keys: pmx-keys {
-+ keys_pin: keys-pin {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
-- pmx_phy_int: pmx-phy-int {
-+ phy_int_pin: phy-int-pin {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -220,7 +220,7 @@
- };
-
- &pinctrl {
-- pmx_ge0_gmii: pmx-ge0-gmii {
-+ ge0_gmii_pins: ge0-gmii-pins {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
-@@ -231,7 +231,7 @@
- marvell,function = "ge0";
- };
-
-- pmx_ge0_rgmii: pmx-ge0-rgmii {
-+ ge0_rgmii_pins: ge0-rgmii-pins {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
-@@ -239,7 +239,7 @@
- marvell,function = "ge0";
- };
-
-- pmx_ge1_rgmii: pmx-ge1-rgmii {
-+ ge1_rgmii_pins: ge1-rgmii-pins {
- marvell,pins =
- "mpp12", "mpp13", "mpp14", "mpp15",
- "mpp16", "mpp17", "mpp18", "mpp19",
+++ /dev/null
-From 91b4c91f919abffa72cbf7545a944252f8e4f775 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:08 +0100
-Subject: [PATCH 3/4] ARM: mvebu: Add a number of pinctrl functions
-
-Some pinctrl functions can be shared with all DTS out there, since they are
-generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid
-duplication.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -196,6 +196,45 @@
- pinctrl {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
-+
-+ ge0_rgmii_pins: ge-rgmii-pins-0 {
-+ marvell,pins = "mpp6", "mpp7", "mpp8",
-+ "mpp9", "mpp10", "mpp11",
-+ "mpp12", "mpp13", "mpp14",
-+ "mpp15", "mpp16", "mpp17";
-+ marvell,function = "ge0";
-+ };
-+
-+ i2c0_pins: i2c-pins-0 {
-+ marvell,pins = "mpp2", "mpp3";
-+ marvell,function = "i2c0";
-+ };
-+
-+ mdio_pins: mdio-pins {
-+ marvell,pins = "mpp4", "mpp5";
-+ marvell,function = "ge";
-+ };
-+
-+ ref_clk0_pins: ref-clk-pins-0 {
-+ marvell,pins = "mpp45";
-+ marvell,function = "ref";
-+ };
-+
-+ spi1_pins: spi-pins-1 {
-+ marvell,pins = "mpp56", "mpp57", "mpp58",
-+ "mpp59";
-+ marvell,function = "spi1";
-+ };
-+
-+ uart0_pins: uart-pins-0 {
-+ marvell,pins = "mpp0", "mpp1";
-+ marvell,function = "ua0";
-+ };
-+
-+ uart1_pins: uart-pins-1 {
-+ marvell,pins = "mpp19", "mpp20";
-+ marvell,function = "ua1";
-+ };
- };
-
- gpio0: gpio@18100 {
+++ /dev/null
-From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:09 +0100
-Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board
- support
-
-The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB
-SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage.
-
-[gregory.clement@free-electrons.com: switch the license to the dual
-X11/GPL with the agreement of the author]
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++
- 2 files changed, 179 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -500,6 +500,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
- armada-375-db.dtb
- dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
-+ armada-385-db-ap.dtb \
- armada-385-rd.dtb
- dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-axpwifiap.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -0,0 +1,178 @@
-+/*
-+ * Device Tree file for Marvell Armada 385 Access Point Development board
-+ * (DB-88F6820-AP)
-+ *
-+ * Copyright (C) 2014 Marvell
-+ *
-+ * Nadav Haklai <nadavh@marvell.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "armada-385.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ model = "Marvell Armada 385 Access Point Development Board";
-+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ stdout-path = &uart1;
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x80000000>; /* 2GB */
-+ };
-+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-+
-+ internal-regs {
-+ spi1: spi@10680 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins>;
-+ status = "okay";
-+
-+ spi-flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "st,m25p128";
-+ reg = <0>; /* Chip select 0 */
-+ spi-max-frequency = <54000000>;
-+ };
-+ };
-+
-+ i2c0: i2c@11000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ status = "okay";
-+
-+ /*
-+ * This bus is wired to two EEPROM
-+ * sockets, one of which holding the
-+ * board ID used by the bootloader.
-+ * Erasing this EEPROM's content will
-+ * brick the board.
-+ * Use this bus with caution.
-+ */
-+ };
-+
-+ mdio@72004 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mdio_pins>;
-+
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+
-+ phy1: ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+
-+ phy2: ethernet-phy@6 {
-+ reg = <6>;
-+ };
-+ };
-+
-+ /* UART0 is exposed through the JP8 connector */
-+ uart0: serial@12000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins>;
-+ status = "okay";
-+ };
-+
-+ /*
-+ * UART1 is exposed through a FTDI chip
-+ * wired to the mini-USB connector
-+ */
-+ uart1: serial@12100 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+ };
-+
-+ ethernet@30000 {
-+ status = "okay";
-+ phy = <&phy2>;
-+ phy-mode = "sgmii";
-+ };
-+
-+ ethernet@34000 {
-+ status = "okay";
-+ phy = <&phy1>;
-+ phy-mode = "sgmii";
-+ };
-+
-+ ethernet@70000 {
-+ pinctrl-names = "default";
-+
-+ /*
-+ * The Reference Clock 0 is used to
-+ * provide a clock to the PHY
-+ */
-+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-+ status = "okay";
-+ phy = <&phy0>;
-+ phy-mode = "rgmii-id";
-+ };
-+ };
-+
-+ pcie-controller {
-+ status = "okay";
-+
-+ /*
-+ * The three PCIe units are accessible through
-+ * standard mini-PCIe slots on the board.
-+ */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ /* Port 1, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ pcie@3,0 {
-+ /* Port 2, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
+++ /dev/null
-From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 11 Dec 2014 14:14:58 +0100
-Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller
-
-The A385 AP has a 1GB NAND chip. Enable it.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -150,6 +150,19 @@
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-+
-+ nfc: flash@d0000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ num-cs = <1>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ };
- };
-
- pcie-controller {
+++ /dev/null
-From a95308d88c07e0093aedae7e64f92cb1e165f592 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 5 Dec 2014 15:44:57 +0100
-Subject: [PATCH] pinctrl: mvebu: a38x: Add UART1 muxing options
-
-The MPP19 and MMP20 pins also have the ability to be muxed to the uart1
-function.
-
-Add this case to the pinctrl driver.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Jason Cooper <jason@lakedaemon.net>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
-+++ b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
-@@ -146,13 +146,15 @@ static struct mvebu_mpp_mode armada_38x_
- MPP_VAR_FUNCTION(2, "ptp", "event_req", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(3, "ge0", "txerr", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(4, "sata1", "prsnt", V_88F6810_PLUS),
-- MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS)),
-+ MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS),
-+ MPP_VAR_FUNCTION(6, "ua1", "rxd", V_88F6810_PLUS)),
- MPP_MODE(20,
- MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS),
- MPP_VAR_FUNCTION(1, "ge0", "txclk", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(2, "ptp", "clk", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(4, "sata0", "prsnt", V_88F6810_PLUS),
-- MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS)),
-+ MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS),
-+ MPP_VAR_FUNCTION(6, "ua1", "txd", V_88F6810_PLUS)),
- MPP_MODE(21,
- MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS),
- MPP_VAR_FUNCTION(1, "spi0", "cs1", V_88F6810_PLUS),
+++ /dev/null
-From 4a25432b13090b57d257fa0ffb6712d8acf94523 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:05 +0100
-Subject: [PATCH 1/4] ARM: mvebu: a38x: Fix node names
-
-Some nodes in the DTs have a reg property but no unit name in their node name.
-
-This contradicts the way the ePAPR defines the node names. Fix this.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-380.dtsi | 2 +-
- arch/arm/boot/dts/armada-385-db.dts | 2 +-
- arch/arm/boot/dts/armada-385-rd.dts | 2 +-
- arch/arm/boot/dts/armada-385.dtsi | 2 +-
- arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
- 5 files changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/dts/armada-380.dtsi
-+++ b/arch/arm/boot/dts/armada-380.dtsi
-@@ -32,7 +32,7 @@
-
- soc {
- internal-regs {
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6810-pinctrl";
- reg = <0x18000 0x20>;
- };
---- a/arch/arm/boot/dts/armada-385-db.dts
-+++ b/arch/arm/boot/dts/armada-385-db.dts
-@@ -74,7 +74,7 @@
- phy-mode = "rgmii-id";
- };
-
-- mdio {
-+ mdio@72004 {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
---- a/arch/arm/boot/dts/armada-385-rd.dts
-+++ b/arch/arm/boot/dts/armada-385-rd.dts
-@@ -67,7 +67,7 @@
- };
-
-
-- mdio {
-+ mdio@72004 {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
---- a/arch/arm/boot/dts/armada-385.dtsi
-+++ b/arch/arm/boot/dts/armada-385.dtsi
-@@ -37,7 +37,7 @@
-
- soc {
- internal-regs {
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
- };
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -193,7 +193,7 @@
- status = "disabled";
- };
-
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
-
-@@ -412,7 +412,7 @@
- status = "disabled";
- };
-
-- mdio {
-+ mdio@72004 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
+++ /dev/null
-From 1bd4d8a6de5cda605e8b99fbf081be2ea2959380 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Fri, 16 Jan 2015 17:11:29 +0100
-Subject: ARM: mvebu: use arm_coherent_dma_ops and re-enable hardware I/O
- coherency
-
-Now that we have enabled automatic I/O synchronization barriers, we no
-longer need any explicit barriers. We can therefore simplify
-arch/arm/mach-mvebu/coherency.c by using the existing
-arm_coherent_dma_ops instead of our custom mvebu_hwcc_dma_ops, and
-re-enable hardware I/O coherency support.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-[Andrew Lunn <andrew@lunn.ch>: Remove forgotten comment]
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-
---- a/arch/arm/mach-mvebu/coherency.c
-+++ b/arch/arm/mach-mvebu/coherency.c
-@@ -33,6 +33,7 @@
- #include <asm/smp_plat.h>
- #include <asm/cacheflush.h>
- #include <asm/mach/map.h>
-+#include <asm/dma-mapping.h>
- #include "armada-370-xp.h"
- #include "coherency.h"
- #include "mvebu-soc-id.h"
-@@ -223,59 +224,6 @@ static void __init armada_375_coherency_
- coherency_wa_enabled = true;
- }
-
--static inline void mvebu_hwcc_sync_io_barrier(void)
--{
-- if (coherency_wa_enabled) {
-- mvebu_hwcc_armada375_sync_io_barrier_wa();
-- return;
-- }
--
-- writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
-- while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
--}
--
--static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page,
-- unsigned long offset, size_t size,
-- enum dma_data_direction dir,
-- struct dma_attrs *attrs)
--{
-- if (dir != DMA_TO_DEVICE)
-- mvebu_hwcc_sync_io_barrier();
-- return pfn_to_dma(dev, page_to_pfn(page)) + offset;
--}
--
--
--static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
-- size_t size, enum dma_data_direction dir,
-- struct dma_attrs *attrs)
--{
-- if (dir != DMA_TO_DEVICE)
-- mvebu_hwcc_sync_io_barrier();
--}
--
--static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle,
-- size_t size, enum dma_data_direction dir)
--{
-- if (dir != DMA_TO_DEVICE)
-- mvebu_hwcc_sync_io_barrier();
--}
--
--static struct dma_map_ops mvebu_hwcc_dma_ops = {
-- .alloc = arm_dma_alloc,
-- .free = arm_dma_free,
-- .mmap = arm_dma_mmap,
-- .map_page = mvebu_hwcc_dma_map_page,
-- .unmap_page = mvebu_hwcc_dma_unmap_page,
-- .get_sgtable = arm_dma_get_sgtable,
-- .map_sg = arm_dma_map_sg,
-- .unmap_sg = arm_dma_unmap_sg,
-- .sync_single_for_cpu = mvebu_hwcc_dma_sync,
-- .sync_single_for_device = mvebu_hwcc_dma_sync,
-- .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu,
-- .sync_sg_for_device = arm_dma_sync_sg_for_device,
-- .set_dma_mask = arm_dma_set_mask,
--};
--
- static int mvebu_hwcc_notifier(struct notifier_block *nb,
- unsigned long event, void *__dev)
- {
-@@ -283,7 +231,7 @@ static int mvebu_hwcc_notifier(struct no
-
- if (event != BUS_NOTIFY_ADD_DEVICE)
- return NOTIFY_DONE;
-- set_dma_ops(dev, &mvebu_hwcc_dma_ops);
-+ set_dma_ops(dev, &arm_coherent_dma_ops);
-
- return NOTIFY_OK;
- }
-@@ -405,14 +353,9 @@ static int coherency_type(void)
- return type;
- }
-
--/*
-- * As a precaution, we currently completely disable hardware I/O
-- * coherency, until enough testing is done with automatic I/O
-- * synchronization barriers to validate that it is a proper solution.
-- */
- int coherency_available(void)
- {
-- return false;
-+ return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
- }
-
- int __init coherency_init(void)
+++ /dev/null
-Document the binding for the TLC59116 LED driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-@@ -0,0 +1,40 @@
-+LEDs connected to tcl59116
-+
-+Required properties
-+- compatible: should be "ti,tlc59116"
-+- #address-cells: must be 1
-+- #size-cells: must be 0
-+- reg: typically 0x68
-+
-+Each led is represented as a sub-node of the ti,,tlc59116.
-+See Documentation/devicetree/bindings/leds/common.txt
-+
-+LED sub-node properties:
-+- reg: number of LED line, 0 to 15
-+- label: (optional) name of LED
-+- linux,default-trigger : (optional)
-+
-+Examples:
-+
-+tlc59116@68 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "ti,tlc59116";
-+ reg = <0x68>;
-+
-+ wan@0 {
-+ label = "wrt1900ac:amber:wan";
-+ reg = <0x0>;
-+ };
-+
-+ 2g@2 {
-+ label = "wrt1900ac:white:2g";
-+ reg = <0x2>;
-+ };
-+
-+ alive@9 {
-+ label = "wrt1900ac:green:alive";
-+ reg = <0x9>;
-+ linux,default_trigger = "heartbeat";
-+ };
-+};
+++ /dev/null
-The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED
-output has its own 8-bit fixed-frequency PWM controller to control the
-brightness of the LED.
-
-This is based on a driver from Belkin, but has been extensively
-rewritten.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/leds/Kconfig | 8 ++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 261 insertions(+)
- create mode 100644 drivers/leds/leds-tlc59116.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -446,6 +446,14 @@ config LEDS_TCA6507
- LED driver chips accessed via the I2C bus.
- Driver support brightness control and hardware-assisted blinking.
-
-+config LEDS_TLC59116
-+ tristate "LED driver for TLC59116F controllers"
-+ depends on LEDS_CLASS && I2C
-+ select REGMAP_I2C
-+ help
-+ This option enables support for Texas Instruments TLC59116F
-+ LED controller.
-+
- config LEDS_MAX8997
- tristate "LED support for MAX8997 PMIC"
- depends on LEDS_CLASS && MFD_MAX8997
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_LP5562) += leds-lp556
- obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
- obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
- obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
-+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
---- /dev/null
-+++ b/drivers/leds/leds-tlc59116.c
-@@ -0,0 +1,252 @@
-+/*
-+ * Copyright 2014 Belkin Inc.
-+ * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+ */
-+
-+#include <linux/i2c.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define TLC59116_LEDS 16
-+
-+#define TLC59116_REG_MODE1 0x00
-+#define MODE1_RESPON_ADDR_MASK 0xF0
-+#define MODE1_NORMAL_MODE (0 << 4)
-+#define MODE1_SPEED_MODE (1 << 4)
-+
-+#define TLC59116_REG_MODE2 0x01
-+#define MODE2_DIM (0 << 5)
-+#define MODE2_BLINK (1 << 5)
-+#define MODE2_OCH_STOP (0 << 3)
-+#define MODE2_OCH_ACK (1 << 3)
-+
-+#define TLC59116_REG_PWM(x) (0x02 + (x))
-+
-+#define TLC59116_REG_GRPPWM 0x12
-+#define TLC59116_REG_GRPFREQ 0x13
-+
-+/* LED Driver Output State, determine the source that drives LED outputs */
-+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2))
-+#define TLC59116_LED_OFF 0x0 /* Output LOW */
-+#define TLC59116_LED_ON 0x1 /* Output HI-Z */
-+#define TLC59116_DIM 0x2 /* Dimming */
-+#define TLC59116_BLINK 0x3 /* Blinking */
-+#define LED_MASK 0x3
-+
-+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev)
-+#define work_to_led(work) container_of(work, struct tlc59116_led, work)
-+
-+struct tlc59116_led {
-+ bool active;
-+ struct regmap *regmap;
-+ unsigned int led_no;
-+ struct led_classdev ldev;
-+ struct work_struct work;
-+};
-+
-+struct tlc59116_priv {
-+ struct tlc59116_led leds[TLC59116_LEDS];
-+};
-+
-+static int
-+tlc59116_set_mode(struct regmap *regmap, u8 mode)
-+{
-+ int err;
-+ u8 val;
-+
-+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
-+ mode = MODE2_DIM;
-+
-+ /* Configure MODE1 register */
-+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
-+ if (err)
-+ return err;
-+
-+ /* Configure MODE2 Reg */
-+ val = MODE2_OCH_STOP | mode;
-+
-+ return regmap_write(regmap, TLC59116_REG_MODE2, val);
-+}
-+
-+static int
-+tlc59116_set_led(struct tlc59116_led *led, u8 val)
-+{
-+ struct regmap *regmap = led->regmap;
-+ unsigned int i = (led->led_no % 4) * 2;
-+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no);
-+ unsigned int mask = LED_MASK << i;
-+
-+ val = val << i;
-+
-+ return regmap_update_bits(regmap, addr, mask, val);
-+}
-+
-+static void
-+tlc59116_led_work(struct work_struct *work)
-+{
-+ struct tlc59116_led *led = work_to_led(work);
-+ struct regmap *regmap = led->regmap;
-+ int err;
-+ u8 pwm;
-+
-+ pwm = TLC59116_REG_PWM(led->led_no);
-+ err = regmap_write(regmap, pwm, led->ldev.brightness);
-+ if (err)
-+ dev_err(led->ldev.dev, "Failed setting brightness\n");
-+}
-+
-+static void
-+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ struct tlc59116_led *led = ldev_to_led(led_cdev);
-+
-+ led->ldev.brightness = value;
-+ schedule_work(&led->work);
-+}
-+
-+static void
-+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i)
-+{
-+ while (--i >= 0) {
-+ if (priv->leds[i].active) {
-+ led_classdev_unregister(&priv->leds[i].ldev);
-+ cancel_work_sync(&priv->leds[i].work);
-+ }
-+ }
-+}
-+
-+static int
-+tlc59116_configure(struct device *dev,
-+ struct tlc59116_priv *priv,
-+ struct regmap *regmap)
-+{
-+ unsigned int i;
-+ int err = 0;
-+
-+ tlc59116_set_mode(regmap, MODE2_DIM);
-+ for (i = 0; i < TLC59116_LEDS; i++) {
-+ struct tlc59116_led *led = &priv->leds[i];
-+
-+ if (!led->active)
-+ continue;
-+
-+ led->regmap = regmap;
-+ led->led_no = i;
-+ led->ldev.brightness_set = tlc59116_led_set;
-+ led->ldev.max_brightness = LED_FULL;
-+ INIT_WORK(&led->work, tlc59116_led_work);
-+ err = led_classdev_register(dev, &led->ldev);
-+ if (err < 0) {
-+ dev_err(dev, "couldn't register LED %s\n",
-+ led->ldev.name);
-+ goto exit;
-+ }
-+ tlc59116_set_led(led, TLC59116_DIM);
-+ }
-+
-+ return 0;
-+
-+exit:
-+ tlc59116_destroy_devices(priv, i);
-+ return err;
-+}
-+
-+static const struct regmap_config tlc59116_regmap = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .max_register = 0x1e,
-+};
-+
-+static int
-+tlc59116_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+ struct device *dev = &client->dev;
-+ struct device_node *np = client->dev.of_node, *child;
-+ struct regmap *regmap;
-+ int err, count, reg;
-+
-+ count = of_get_child_count(np);
-+ if (!count || count > TLC59116_LEDS)
-+ return -EINVAL;
-+
-+ if (!i2c_check_functionality(client->adapter,
-+ I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -EIO;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
-+ if (IS_ERR(regmap)) {
-+ err = PTR_ERR(regmap);
-+ dev_err(dev, "Failed to allocate register map: %d\n", err);
-+ return err;
-+ }
-+
-+ i2c_set_clientdata(client, priv);
-+
-+ for_each_child_of_node(np, child) {
-+ err = of_property_read_u32(child, "reg", ®);
-+ if (err)
-+ return err;
-+ if (reg < 0 || reg >= TLC59116_LEDS)
-+ return -EINVAL;
-+ if (priv->leds[reg].active)
-+ return -EINVAL;
-+ priv->leds[reg].active = true;
-+ priv->leds[reg].ldev.name =
-+ of_get_property(child, "label", NULL) ? : child->name;
-+ priv->leds[reg].ldev.default_trigger =
-+ of_get_property(child, "linux,default-trigger", NULL);
-+ }
-+ return tlc59116_configure(dev, priv, regmap);
-+}
-+
-+static int
-+tlc59116_remove(struct i2c_client *client)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+
-+ tlc59116_destroy_devices(priv, TLC59116_LEDS);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id of_tlc59116_leds_match[] = {
-+ { .compatible = "ti,tlc59116", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
-+
-+static const struct i2c_device_id tlc59116_id[] = {
-+ { "tlc59116" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
-+
-+static struct i2c_driver tlc59116_driver = {
-+ .driver = {
-+ .name = "tlc59116",
-+ .of_match_table = of_match_ptr(of_tlc59116_leds_match),
-+ },
-+ .probe = tlc59116_probe,
-+ .remove = tlc59116_remove,
-+ .id_table = tlc59116_id,
-+};
-+
-+module_i2c_driver(tlc59116_driver);
-+
-+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("TLC59116 LED driver");
+++ /dev/null
-From ce6031c89a35cffd5a5992b08377b77f49a004b9 Mon Sep 17 00:00:00 2001
-From: Sebastien Rannou <mxs@sbrk.org>
-Date: Fri, 13 Feb 2015 15:55:03 +0100
-Subject: [PATCH] cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
-
-Originally, the thresholds used in the cpuidle driver for Armada SOCs
-were temporarily chosen, leaving room for improvements.
-
-This commit updates the thresholds for the Armada XP SOCs with values
-that positively impact performances:
-
- without patch with patch vendor kernel
- - iperf localhost (gbit/sec) ~3.7 ~6.4 ~5.4
- - ioping tmpfs (iops) ~163k ~206k ~179k
- - ioping tmpfs (mib/s) ~636 ~805 ~699
-
-The idle power consumption is negatively impacted (proportionally less
-than the performance gain), and we are still performing better than
-the vendor kernel here:
-
- without patch with patch vendor kernel
- - power consumption idle (W) ~2.4 ~3.2 ~4.4
- - power consumption busy (W) ~8.6 ~8.3 ~8.6
-
-There is still room for improvement regarding the value of these
-thresholds, they were chosen to mimic the vendor kernel.
-
-This patch only impacts Armada XP SOCs and was tested on Online Labs
-C1 boards. A similar approach can be taken to improve the performances
-of the Armada 370 and Armada 38x SOCs.
-
-Thanks a lot to Thomas Petazzoni, Gregory Clement and Willy Tarreau
-for the discussions and tips around this topic.
-
-Signed-off-by: Sebastien Rannou <mxs@sbrk.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -50,18 +50,18 @@ static struct cpuidle_driver armadaxp_id
- .states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .enter = mvebu_v7_enter_idle,
-- .exit_latency = 10,
-+ .exit_latency = 100,
- .power_usage = 50,
-- .target_residency = 100,
-+ .target_residency = 1000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .name = "MV CPU IDLE",
- .desc = "CPU power down",
- },
- .states[2] = {
- .enter = mvebu_v7_enter_idle,
-- .exit_latency = 100,
-+ .exit_latency = 1000,
- .power_usage = 5,
-- .target_residency = 1000,
-+ .target_residency = 10000,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- MVEBU_V7_FLAG_DEEP_IDLE,
- .name = "MV CPU DEEP IDLE",
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -501,6 +501,9 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
- dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
- armada-385-db-ap.dtb \
-+ armada-385-linksys-caiman.dtb \
-+ armada-385-linksys-cobra.dtb \
-+ armada-385-linksys-shelby.dtb \
- armada-385-rd.dtb
- dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-axpwifiap.dtb \
+++ /dev/null
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct device_node *node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i;
-
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- (*pparts)[i].offset = of_read_number(reg, a_cells);
- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- (*pparts)[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -49,12 +49,10 @@
- };
-
- i2c0: i2c@11000 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c@11100 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -236,7 +236,7 @@
- status = "disabled";
- };
-
-- mdio {
-+ mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
+++ /dev/null
-From 842f7d2c4d392c0571cf72e3eaca26742bebbd1e Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Tue, 2 Dec 2014 17:48:02 +0100
-Subject: ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
-
-This commit adjusts the registration of the cpufreq-dt driver in the
-mvebu platform to indicate to the cpufreq driver that the platform has
-independent clocks for each CPU.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Acked-by: Jason Cooper <jason@lakedaemon.net>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
---- a/arch/arm/mach-mvebu/pmsu.c
-+++ b/arch/arm/mach-mvebu/pmsu.c
-@@ -20,6 +20,7 @@
-
- #include <linux/clk.h>
- #include <linux/cpu_pm.h>
-+#include <linux/cpufreq-dt.h>
- #include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/io.h>
-@@ -586,6 +587,10 @@ int mvebu_pmsu_dfs_request(int cpu)
- return 0;
- }
-
-+struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-+ .independent_clocks = true,
-+};
-+
- static int __init armada_xp_pmsu_cpufreq_init(void)
- {
- struct device_node *np;
-@@ -658,7 +663,8 @@ static int __init armada_xp_pmsu_cpufreq
- }
- }
-
-- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-+ platform_device_register_data(NULL, "cpufreq-dt", -1,
-+ &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
- return 0;
- }
-
+++ /dev/null
-This commit adds the implementation of ->suspend() and ->resume()
-platform_driver hooks in order to save and restore the state of the
-GPIO configuration. In order to achieve that, additional fields are
-added to the mvebu_gpio_chip structure.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Acked-by: Alexandre Courbot <acourbot@nvidia.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -83,6 +83,14 @@ struct mvebu_gpio_chip {
- int irqbase;
- struct irq_domain *domain;
- int soc_variant;
-+
-+ /* Used to preserve GPIO registers accross suspend/resume */
-+ u32 out_reg;
-+ u32 io_conf_reg;
-+ u32 blink_en_reg;
-+ u32 in_pol_reg;
-+ u32 edge_mask_regs[4];
-+ u32 level_mask_regs[4];
- };
-
- /*
-@@ -562,6 +570,93 @@ static const struct of_device_id mvebu_g
- };
- MODULE_DEVICE_TABLE(of, mvebu_gpio_of_match);
-
-+static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
-+ int i;
-+
-+ mvchip->out_reg = readl(mvebu_gpioreg_out(mvchip));
-+ mvchip->io_conf_reg = readl(mvebu_gpioreg_io_conf(mvchip));
-+ mvchip->blink_en_reg = readl(mvebu_gpioreg_blink(mvchip));
-+ mvchip->in_pol_reg = readl(mvebu_gpioreg_in_pol(mvchip));
-+
-+ switch (mvchip->soc_variant) {
-+ case MVEBU_GPIO_SOC_VARIANT_ORION:
-+ mvchip->edge_mask_regs[0] =
-+ readl(mvchip->membase + GPIO_EDGE_MASK_OFF);
-+ mvchip->level_mask_regs[0] =
-+ readl(mvchip->membase + GPIO_LEVEL_MASK_OFF);
-+ break;
-+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
-+ for (i = 0; i < 2; i++) {
-+ mvchip->edge_mask_regs[i] =
-+ readl(mvchip->membase +
-+ GPIO_EDGE_MASK_MV78200_OFF(i));
-+ mvchip->level_mask_regs[i] =
-+ readl(mvchip->membase +
-+ GPIO_LEVEL_MASK_MV78200_OFF(i));
-+ }
-+ break;
-+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
-+ for (i = 0; i < 4; i++) {
-+ mvchip->edge_mask_regs[i] =
-+ readl(mvchip->membase +
-+ GPIO_EDGE_MASK_ARMADAXP_OFF(i));
-+ mvchip->level_mask_regs[i] =
-+ readl(mvchip->membase +
-+ GPIO_LEVEL_MASK_ARMADAXP_OFF(i));
-+ }
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ return 0;
-+}
-+
-+static int mvebu_gpio_resume(struct platform_device *pdev)
-+{
-+ struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
-+ int i;
-+
-+ writel(mvchip->out_reg, mvebu_gpioreg_out(mvchip));
-+ writel(mvchip->io_conf_reg, mvebu_gpioreg_io_conf(mvchip));
-+ writel(mvchip->blink_en_reg, mvebu_gpioreg_blink(mvchip));
-+ writel(mvchip->in_pol_reg, mvebu_gpioreg_in_pol(mvchip));
-+
-+ switch (mvchip->soc_variant) {
-+ case MVEBU_GPIO_SOC_VARIANT_ORION:
-+ writel(mvchip->edge_mask_regs[0],
-+ mvchip->membase + GPIO_EDGE_MASK_OFF);
-+ writel(mvchip->level_mask_regs[0],
-+ mvchip->membase + GPIO_LEVEL_MASK_OFF);
-+ break;
-+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
-+ for (i = 0; i < 2; i++) {
-+ writel(mvchip->edge_mask_regs[i],
-+ mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(i));
-+ writel(mvchip->level_mask_regs[i],
-+ mvchip->membase +
-+ GPIO_LEVEL_MASK_MV78200_OFF(i));
-+ }
-+ break;
-+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
-+ for (i = 0; i < 4; i++) {
-+ writel(mvchip->edge_mask_regs[i],
-+ mvchip->membase +
-+ GPIO_EDGE_MASK_ARMADAXP_OFF(i));
-+ writel(mvchip->level_mask_regs[i],
-+ mvchip->membase +
-+ GPIO_LEVEL_MASK_ARMADAXP_OFF(i));
-+ }
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ return 0;
-+}
-+
- static int mvebu_gpio_probe(struct platform_device *pdev)
- {
- struct mvebu_gpio_chip *mvchip;
-@@ -585,6 +680,8 @@ static int mvebu_gpio_probe(struct platf
- if (!mvchip)
- return -ENOMEM;
-
-+ platform_set_drvdata(pdev, mvchip);
-+
- if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) {
- dev_err(&pdev->dev, "Missing ngpios OF property\n");
- return -ENODEV;
-@@ -743,5 +840,7 @@ static struct platform_driver mvebu_gpio
- .of_match_table = mvebu_gpio_of_match,
- },
- .probe = mvebu_gpio_probe,
-+ .suspend = mvebu_gpio_suspend,
-+ .resume = mvebu_gpio_resume,
- };
- module_platform_driver(mvebu_gpio_driver);
+++ /dev/null
-A platform_driver does not need to set an owner, it will be populated by the
-driver core.
-
-Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -836,7 +836,6 @@ static int mvebu_gpio_probe(struct platf
- static struct platform_driver mvebu_gpio_driver = {
- .driver = {
- .name = "mvebu-gpio",
-- .owner = THIS_MODULE,
- .of_match_table = mvebu_gpio_of_match,
- },
- .probe = mvebu_gpio_probe,
+++ /dev/null
-Wrap some long lines.
-Prefer seq_puts() over seq_printf().
-space to tab conversions.
-Spelling error fix.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/gpio-mvebu.c | 77 ++++++++++++++++++++++++++---------------------
- 1 file changed, 42 insertions(+), 35 deletions(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -59,7 +59,7 @@
- #define GPIO_LEVEL_MASK_OFF 0x001c
-
- /* The MV78200 has per-CPU registers for edge mask and level mask */
--#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
-+#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
- #define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C)
-
- /* The Armada XP has per-CPU registers for interrupt cause, interrupt
-@@ -69,11 +69,11 @@
- #define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4)
- #define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4)
-
--#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
--#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
-+#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
-+#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
- #define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3
-
--#define MVEBU_MAX_GPIO_PER_BANK 32
-+#define MVEBU_MAX_GPIO_PER_BANK 32
-
- struct mvebu_gpio_chip {
- struct gpio_chip chip;
-@@ -82,9 +82,9 @@ struct mvebu_gpio_chip {
- void __iomem *percpu_membase;
- int irqbase;
- struct irq_domain *domain;
-- int soc_variant;
-+ int soc_variant;
-
-- /* Used to preserve GPIO registers accross suspend/resume */
-+ /* Used to preserve GPIO registers across suspend/resume */
- u32 out_reg;
- u32 io_conf_reg;
- u32 blink_en_reg;
-@@ -107,7 +107,8 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_BLINK_EN_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
- {
- return mvchip->membase + GPIO_IO_CONF_OFF;
- }
-@@ -117,12 +118,14 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_IN_POL_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip)
- {
- return mvchip->membase + GPIO_DATA_IN_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip)
- {
- int cpu;
-
-@@ -132,13 +135,15 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_EDGE_CAUSE_OFF;
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
- }
-
--static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip)
- {
- int cpu;
-
-@@ -150,7 +155,8 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu);
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
-@@ -168,7 +174,8 @@ static void __iomem *mvebu_gpioreg_level
- return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu);
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
-@@ -372,22 +379,22 @@ static void mvebu_gpio_level_irq_unmask(
- * value of the line or the opposite value.
- *
- * Level IRQ handlers: DATA_IN is used directly as cause register.
-- * Interrupt are masked by LEVEL_MASK registers.
-+ * Interrupt are masked by LEVEL_MASK registers.
- * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
-- * Interrupt are masked by EDGE_MASK registers.
-+ * Interrupt are masked by EDGE_MASK registers.
- * Both-edge handlers: Similar to regular Edge handlers, but also swaps
-- * the polarity to catch the next line transaction.
-- * This is a race condition that might not perfectly
-- * work on some use cases.
-+ * the polarity to catch the next line transaction.
-+ * This is a race condition that might not perfectly
-+ * work on some use cases.
- *
- * Every eight GPIO lines are grouped (OR'ed) before going up to main
- * cause register.
- *
-- * EDGE cause mask
-- * data-in /--------| |-----| |----\
-- * -----| |----- ---- to main cause reg
-- * X \----------------| |----/
-- * polarity LEVEL mask
-+ * EDGE cause mask
-+ * data-in /--------| |-----| |----\
-+ * -----| |----- ---- to main cause reg
-+ * X \----------------| |----/
-+ * polarity LEVEL mask
- *
- ****************************************************************************/
-
-@@ -402,9 +409,8 @@ static int mvebu_gpio_irq_set_type(struc
- pin = d->hwirq;
-
- u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin);
-- if (!u) {
-+ if (!u)
- return -EINVAL;
-- }
-
- type &= IRQ_TYPE_SENSE_MASK;
- if (type == IRQ_TYPE_NONE)
-@@ -537,13 +543,13 @@ static void mvebu_gpio_dbg_show(struct s
- (data_in ^ in_pol) & msk ? "hi" : "lo",
- in_pol & msk ? "lo" : "hi");
- if (!((edg_msk | lvl_msk) & msk)) {
-- seq_printf(s, " disabled\n");
-+ seq_puts(s, " disabled\n");
- continue;
- }
- if (edg_msk & msk)
-- seq_printf(s, " edge ");
-+ seq_puts(s, " edge ");
- if (lvl_msk & msk)
-- seq_printf(s, " level");
-+ seq_puts(s, " level");
- seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear ");
- }
- }
-@@ -554,15 +560,15 @@ static void mvebu_gpio_dbg_show(struct s
- static const struct of_device_id mvebu_gpio_of_match[] = {
- {
- .compatible = "marvell,orion-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
- },
- {
- .compatible = "marvell,mv78200-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
- },
- {
- .compatible = "marvell,armadaxp-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
- },
- {
- /* sentinel */
-@@ -676,7 +682,8 @@ static int mvebu_gpio_probe(struct platf
- else
- soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;
-
-- mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL);
-+ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip),
-+ GFP_KERNEL);
- if (!mvchip)
- return -ENOMEM;
-
-@@ -775,8 +782,8 @@ static int mvebu_gpio_probe(struct platf
- * interrupt handlers, with each handler dealing with 8 GPIO
- * pins. */
- for (i = 0; i < 4; i++) {
-- int irq;
-- irq = platform_get_irq(pdev, i);
-+ int irq = platform_get_irq(pdev, i);
-+
- if (irq < 0)
- continue;
- irq_set_handler_data(irq, mvchip);
-@@ -835,7 +842,7 @@ static int mvebu_gpio_probe(struct platf
-
- static struct platform_driver mvebu_gpio_driver = {
- .driver = {
-- .name = "mvebu-gpio",
-+ .name = "mvebu-gpio",
- .of_match_table = mvebu_gpio_of_match,
- },
- .probe = mvebu_gpio_probe,
+++ /dev/null
-Ensure that when there is an error during probe that the gpiochip is
-removed and the generic irq chip is removed.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++------
- 1 file changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -675,6 +675,7 @@ static int mvebu_gpio_probe(struct platf
- unsigned int ngpios;
- int soc_variant;
- int i, cpu, id;
-+ int err;
-
- match = of_match_device(mvebu_gpio_of_match, &pdev->dev);
- if (match)
-@@ -793,14 +794,16 @@ static int mvebu_gpio_probe(struct platf
- mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1);
- if (mvchip->irqbase < 0) {
- dev_err(&pdev->dev, "no irqs\n");
-- return mvchip->irqbase;
-+ err = mvchip->irqbase;
-+ goto err_gpiochip_add;
- }
-
- gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase,
- mvchip->membase, handle_level_irq);
- if (!gc) {
- dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n");
-- return -ENOMEM;
-+ err = -ENOMEM;
-+ goto err_gpiochip_add;
- }
-
- gc->private = mvchip;
-@@ -831,13 +834,21 @@ static int mvebu_gpio_probe(struct platf
- if (!mvchip->domain) {
- dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n",
- mvchip->chip.label);
-- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
-- IRQ_LEVEL | IRQ_NOPROBE);
-- kfree(gc);
-- return -ENODEV;
-+ err = -ENODEV;
-+ goto err_generic_chip;
- }
-
- return 0;
-+
-+err_generic_chip:
-+ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
-+ IRQ_LEVEL | IRQ_NOPROBE);
-+ kfree(gc);
-+
-+err_gpiochip_add:
-+ gpiochip_remove(&mvchip->chip);
-+
-+ return err;
- }
-
- static struct platform_driver mvebu_gpio_driver = {
+++ /dev/null
-Armada 370/XP devices can 'blink' gpio lines with a configurable on
-and off period. This can be modelled as a PWM.
-
-However, there are only two sets of PWM configuration registers for
-all the gpio lines. This driver simply allows a single gpio line per
-gpio chip of 32 lines to be used as a PWM. Attempts to use more return
-EBUSY.
-
-Due to the interleaving of registers it is not simple to separate the
-PWM driver from the gpio driver. Thus the gpio driver has been
-extended with a PWM driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/Kconfig | 5 ++
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpio-mvebu.c | 37 +++-----
- drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++
- 5 files changed, 299 insertions(+), 25 deletions(-)
- create mode 100644 drivers/gpio/gpio-mvebu-pwm.c
- create mode 100644 drivers/gpio/gpio-mvebu.h
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -223,6 +223,11 @@ config GPIO_MVEBU
- select GPIO_GENERIC
- select GENERIC_IRQ_CHIP
-
-+config GPIO_MVEBU_PWM
-+ def_bool y
-+ depends on GPIO_MVEBU
-+ depends on PWM
-+
- config GPIO_MXC
- def_bool y
- depends on ARCH_MXC
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
- obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
- obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
-+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
- obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu-pwm.c
-@@ -0,0 +1,202 @@
-+#include "asm/io.h"
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/gpio.h>
-+#include <linux/pwm.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include "gpio-mvebu.h"
-+#include "gpiolib.h"
-+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip)
-+{
-+ return mvchip->membase + GPIO_BLINK_CNT_SELECT;
-+}
-+
-+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mvebu_pwm, chip);
-+}
-+
-+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm)
-+{
-+ return container_of(pwm, struct mvebu_gpio_chip, pwm);
-+}
-+
-+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ if (pwm->used) {
-+ ret = -EBUSY;
-+ } else {
-+ if (!desc) {
-+ ret = -ENODEV;
-+ goto out;
-+ }
-+ ret = gpiod_request(desc, "mvebu-pwm");
-+ if (ret)
-+ goto out;
-+
-+ ret = gpiod_direction_output(desc, 0);
-+ if (ret) {
-+ gpiod_free(desc);
-+ goto out;
-+ }
-+
-+ pwm->pin = pwmd->pwm - mvchip->chip.base;
-+ pwm->used = true;
-+ }
-+
-+out:
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return ret;
-+}
-+
-+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ gpiod_free(desc);
-+ pwm->used = false;
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+}
-+
-+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd,
-+ int duty_ns, int period_ns)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ unsigned int on, off;
-+ unsigned long long val;
-+ u32 u;
-+
-+ val = (unsigned long long) pwm->clk_rate * duty_ns;
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ on = val;
-+ else
-+ on = 1;
-+
-+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns);
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ off = val;
-+ else
-+ off = 1;
-+
-+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ u &= ~(1 << pwm->pin);
-+ u |= (pwm->id << pwm->pin);
-+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip));
-+
-+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION);
-+
-+ return 0;
-+}
-+
-+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1);
-+
-+ return 0;
-+}
-+
-+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0);
-+}
-+
-+static const struct pwm_ops mvebu_pwm_ops = {
-+ .request = mvebu_pwm_request,
-+ .free = mvebu_pwm_free,
-+ .config = mvebu_pwm_config,
-+ .enable = mvebu_pwm_enable,
-+ .disable = mvebu_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ pwm->blink_on_duration =
-+ readl_relaxed(pwm->membase + BLINK_ON_DURATION);
-+ pwm->blink_off_duration =
-+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip));
-+ writel_relaxed(pwm->blink_on_duration,
-+ pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(pwm->blink_off_duration,
-+ pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+/*
-+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs
-+ * don't have this hardware. So if we don't have the necessary
-+ * resource, it is not an error.
-+ */
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+ struct resource *res;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
-+ if (!res)
-+ return 0;
-+
-+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mvchip->pwm.membase))
-+ return PTR_ERR(mvchip->percpu_membase);
-+
-+ if (id < 0 || id > 1)
-+ return -EINVAL;
-+ pwm->id = id;
-+
-+ if (IS_ERR(mvchip->clk))
-+ return PTR_ERR(mvchip->clk);
-+
-+ pwm->clk_rate = clk_get_rate(mvchip->clk);
-+ if (!pwm->clk_rate) {
-+ dev_err(dev, "failed to get clock rate\n");
-+ return -EINVAL;
-+ }
-+
-+ pwm->chip.dev = dev;
-+ pwm->chip.ops = &mvebu_pwm_ops;
-+ pwm->chip.base = mvchip->chip.base;
-+ pwm->chip.npwm = mvchip->chip.ngpio;
-+ pwm->chip.can_sleep = false;
-+
-+ spin_lock_init(&pwm->lock);
-+
-+ return pwmchip_add(&pwm->chip);
-+}
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -42,10 +42,11 @@
- #include <linux/io.h>
- #include <linux/of_irq.h>
- #include <linux/of_device.h>
-+#include <linux/pwm.h>
- #include <linux/clk.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/irqchip/chained_irq.h>
--
-+#include "gpio-mvebu.h"
- /*
- * GPIO unit register offsets.
- */
-@@ -75,24 +76,6 @@
-
- #define MVEBU_MAX_GPIO_PER_BANK 32
-
--struct mvebu_gpio_chip {
-- struct gpio_chip chip;
-- spinlock_t lock;
-- void __iomem *membase;
-- void __iomem *percpu_membase;
-- int irqbase;
-- struct irq_domain *domain;
-- int soc_variant;
--
-- /* Used to preserve GPIO registers across suspend/resume */
-- u32 out_reg;
-- u32 io_conf_reg;
-- u32 blink_en_reg;
-- u32 in_pol_reg;
-- u32 edge_mask_regs[4];
-- u32 level_mask_regs[4];
--};
--
- /*
- * Functions returning addresses of individual registers for a given
- * GPIO controller.
-@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch
- return (u >> pin) & 1;
- }
-
--static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
- {
- struct mvebu_gpio_chip *mvchip =
- container_of(chip, struct mvebu_gpio_chip, chip);
-@@ -617,6 +600,8 @@ static int mvebu_gpio_suspend(struct pla
- BUG();
- }
-
-+ mvebu_pwm_suspend(mvchip);
-+
- return 0;
- }
-
-@@ -660,6 +645,8 @@ static int mvebu_gpio_resume(struct plat
- BUG();
- }
-
-+ mvebu_pwm_resume(mvchip);
-+
- return 0;
- }
-
-@@ -671,7 +658,6 @@ static int mvebu_gpio_probe(struct platf
- struct resource *res;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-- struct clk *clk;
- unsigned int ngpios;
- int soc_variant;
- int i, cpu, id;
-@@ -701,10 +687,10 @@ static int mvebu_gpio_probe(struct platf
- return id;
- }
-
-- clk = devm_clk_get(&pdev->dev, NULL);
-+ mvchip->clk = devm_clk_get(&pdev->dev, NULL);
- /* Not all SoCs require a clock.*/
-- if (!IS_ERR(clk))
-- clk_prepare_enable(clk);
-+ if (!IS_ERR(mvchip->clk))
-+ clk_prepare_enable(mvchip->clk);
-
- mvchip->soc_variant = soc_variant;
- mvchip->chip.label = dev_name(&pdev->dev);
-@@ -838,7 +824,8 @@ static int mvebu_gpio_probe(struct platf
- goto err_generic_chip;
- }
-
-- return 0;
-+ /* Armada 370/XP has simple PWM support for gpio lines */
-+ return mvebu_pwm_probe(pdev, mvchip, id);
-
- err_generic_chip:
- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu.h
-@@ -0,0 +1,79 @@
-+/*
-+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins
-+ *
-+ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef MVEBU_GPIO_PWM_H
-+#define MVEBU_GPIO_PWM_H
-+
-+#define BLINK_ON_DURATION 0x0
-+#define BLINK_OFF_DURATION 0x4
-+#define GPIO_BLINK_CNT_SELECT 0x0020
-+
-+struct mvebu_pwm {
-+ void __iomem *membase;
-+ unsigned long clk_rate;
-+ bool used;
-+ unsigned pin;
-+ struct pwm_chip chip;
-+ int id;
-+ spinlock_t lock;
-+
-+ /* Used to preserve GPIO/PWM registers across suspend /
-+ * resume */
-+ u32 blink_select;
-+ u32 blink_on_duration;
-+ u32 blink_off_duration;
-+};
-+
-+struct mvebu_gpio_chip {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ void __iomem *percpu_membase;
-+ int irqbase;
-+ struct irq_domain *domain;
-+ int soc_variant;
-+ struct clk *clk;
-+#ifdef CONFIG_PWM
-+ struct mvebu_pwm pwm;
-+#endif
-+ /* Used to preserve GPIO registers across suspend/resume */
-+ u32 out_reg;
-+ u32 io_conf_reg;
-+ u32 blink_en_reg;
-+ u32 in_pol_reg;
-+ u32 edge_mask_regs[4];
-+ u32 level_mask_regs[4];
-+};
-+
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value);
-+
-+#ifdef CONFIG_PWM
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id);
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip);
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip);
-+#else
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ return 0;
-+}
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+#endif
-+#endif
+++ /dev/null
-Document the optional parameters needed for PWM operation of gpio
-lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-@@ -38,6 +38,23 @@ Required properties:
- - #gpio-cells: Should be two. The first cell is the pin number. The
- second cell is reserved for flags, unused at the moment.
-
-+Optional properties:
-+
-+In order to use the gpio lines in PWM mode, some additional optional
-+properties are required. Only Armada 370 and XP supports these
-+properties.
-+
-+- reg: an additional register set is needed, for the GPIO Blink
-+ Counter on/off registers.
-+
-+- reg-names: Must contain an entry "pwm" corresponding to the
-+ additional register range needed for pwm operation.
-+
-+- #pwm-cells: Should be two. The first cell is the pin number. The
-+ second cell is reserved for flags, unused at the moment.
-+
-+- clocks: Must be a phandle to the clock for the gpio controller.
-+
- Example:
-
- gpio0: gpio@d0018100 {
-@@ -51,3 +68,17 @@ Example:
- #interrupt-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
- };
-+
-+ gpio1: gpio@18140 {
-+ compatible = "marvell,orion-gpio";
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
-+ ngpios = <17>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #pwm-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
-+ };
+++ /dev/null
-Add properties to the gpio nodes to allow them to be also used
-as pwm lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++--
- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
- 4 files changed, 30 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -109,24 +109,30 @@
-
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -169,24 +169,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <17>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -253,24 +253,28 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -291,24 +291,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
+++ /dev/null
-Now that the gpio driver also supports PWM operation, enable
-the PWM framework in mvebu_v7_defconfig.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/configs/mvebu_v7_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/configs/mvebu_v7_defconfig
-+++ b/arch/arm/configs/mvebu_v7_defconfig
-@@ -109,6 +109,7 @@ CONFIG_DMADEVICES=y
- CONFIG_MV_XOR=y
- # CONFIG_IOMMU_SUPPORT is not set
- CONFIG_MEMORY=y
-+CONFIG_PWM=y
- CONFIG_EXT4_FS=y
- CONFIG_ISO9660_FS=y
- CONFIG_JOLIET=y
+++ /dev/null
-The mvebu gpio driver can also perform PWM on some pins. Us the
-pwm-fan driver to control the fan of the WRT1900AC, giving us fine
-grain control over its speed and hence noise.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -412,13 +412,11 @@
- };
- };
-
-- gpio_fan {
-+ pwm_fan {
- /* SUNON HA4010V4-0000-C99 */
-- compatible = "gpio-fan";
-- gpios = <&gpio0 24 0>;
-
-- gpio-fan,speed-map = <0 0
-- 4500 1>;
-+ compatible = "pwm-fan";
-+ pwms = <&gpio0 24 4000 0>;
- };
-
- mvsw61xx {
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-rd.dts
-+++ b/arch/arm/boot/dts/armada-385-rd.dts
-@@ -42,6 +42,16 @@
- compatible = "st,m25p128";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
+++ /dev/null
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -162,6 +162,21 @@
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-+
-+ mtd0@00000000 {
-+ label = "u-boot";
-+ reg = <0x00000000 0x00800000>;
-+ };
-+
-+ mtd1@00800000 {
-+ label = "kernel";
-+ reg = <0x00800000 0x00800000>;
-+ };
-+
-+ mtd2@01000000 {
-+ label = "ubi";
-+ reg = <0x01000000 0x3f000000>;
-+ };
- };
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -173,7 +173,7 @@
- status = "disabled";
- };
-
-- serial@12000 {
-+ uart0: serial@12000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
-@@ -193,7 +193,7 @@
- status = "disabled";
- };
-
-- pinctrl@18000 {
-+ pinctrl: pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
-
-@@ -412,7 +412,7 @@
- status = "disabled";
- };
-
-- mdio@72004 {
-+ mdio: mdio@72004 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
+++ /dev/null
---- /dev/null
-+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
-@@ -0,0 +1,22 @@
-+* Real Time Clock of the Armada 38x SoCs
-+
-+RTC controller for the Armada 38x SoCs
-+
-+Required properties:
-+- compatible : Should be "marvell,armada-380-rtc"
-+- reg: a list of base address and size pairs, one for each entry in
-+ reg-names
-+- reg names: should contain:
-+ * "rtc" for the RTC registers
-+ * "rtc-soc" for the SoC related registers and among them the one
-+ related to the interrupt.
-+- interrupts: IRQ line for the RTC.
-+
-+Example:
-+
-+rtc@a3800 {
-+ compatible = "marvell,armada-380-rtc";
-+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-+ reg-names = "rtc", "rtc-soc";
-+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+};
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -1262,6 +1262,16 @@ config RTC_DRV_MV
- This driver can also be built as a module. If so, the module
- will be called rtc-mv.
-
-+config RTC_DRV_ARMADA38X
-+ tristate "Armada 38x Marvell SoC RTC"
-+ depends on ARCH_MVEBU
-+ help
-+ If you say yes here you will get support for the in-chip RTC
-+ that can be found in the Armada 38x Marvell's SoC device
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called armada38x-rtc.
-+
- config RTC_DRV_PS3
- tristate "PS3 RTC"
- depends on PPC_PS3
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-8
- obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
- obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
- obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
-+obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
- obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
- obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
---- /dev/null
-+++ b/drivers/rtc/rtc-armada38x.c
-@@ -0,0 +1,320 @@
-+/*
-+ * RTC driver for the Armada 38x Marvell SoCs
-+ *
-+ * Copyright (C) 2015 Marvell
-+ *
-+ * Gregory Clement <gregory.clement@free-electrons.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#define RTC_STATUS 0x0
-+#define RTC_STATUS_ALARM1 BIT(0)
-+#define RTC_STATUS_ALARM2 BIT(1)
-+#define RTC_IRQ1_CONF 0x4
-+#define RTC_IRQ1_AL_EN BIT(0)
-+#define RTC_IRQ1_FREQ_EN BIT(1)
-+#define RTC_IRQ1_FREQ_1HZ BIT(2)
-+#define RTC_TIME 0xC
-+#define RTC_ALARM1 0x10
-+
-+#define SOC_RTC_INTERRUPT 0x8
-+#define SOC_RTC_ALARM1 BIT(0)
-+#define SOC_RTC_ALARM2 BIT(1)
-+#define SOC_RTC_ALARM1_MASK BIT(2)
-+#define SOC_RTC_ALARM2_MASK BIT(3)
-+
-+struct armada38x_rtc {
-+ struct rtc_device *rtc_dev;
-+ void __iomem *regs;
-+ void __iomem *regs_soc;
-+ spinlock_t lock;
-+ int irq;
-+};
-+
-+/*
-+ * According to the datasheet, the OS should wait 5us after every
-+ * register write to the RTC hard macro so that the required update
-+ * can occur without holding off the system bus
-+ */
-+static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
-+{
-+ writel(val, rtc->regs + offset);
-+ udelay(5);
-+}
-+
-+static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long time, time_check, flags;
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ time = readl(rtc->regs + RTC_TIME);
-+ /*
-+ * WA for failing time set attempts. As stated in HW ERRATA if
-+ * more than one second between two time reads is detected
-+ * then read once again.
-+ */
-+ time_check = readl(rtc->regs + RTC_TIME);
-+ if ((time_check - time) > 1)
-+ time_check = readl(rtc->regs + RTC_TIME);
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+ rtc_time_to_tm(time_check, tm);
-+
-+ return 0;
-+}
-+
-+static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ int ret = 0;
-+ unsigned long time, flags;
-+
-+ ret = rtc_tm_to_time(tm, &time);
-+
-+ if (ret)
-+ goto out;
-+ /*
-+ * Setting the RTC time not always succeeds. According to the
-+ * errata we need to first write on the status register and
-+ * then wait for 100ms before writing to the time register to be
-+ * sure that the data will be taken into account.
-+ */
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ rtc_delayed_write(0, rtc, RTC_STATUS);
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+ msleep(100);
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ rtc_delayed_write(time, rtc, RTC_TIME);
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+out:
-+ return ret;
-+}
-+
-+static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long time, flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ time = readl(rtc->regs + RTC_ALARM1);
-+ val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN;
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+ alrm->enabled = val ? 1 : 0;
-+ rtc_time_to_tm(time, &alrm->time);
-+
-+ return 0;
-+}
-+
-+static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long time, flags;
-+ int ret = 0;
-+ u32 val;
-+
-+ ret = rtc_tm_to_time(&alrm->time, &time);
-+
-+ if (ret)
-+ goto out;
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ rtc_delayed_write(time, rtc, RTC_ALARM1);
-+
-+ if (alrm->enabled) {
-+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
-+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
-+ writel(val | SOC_RTC_ALARM1_MASK,
-+ rtc->regs_soc + SOC_RTC_INTERRUPT);
-+ }
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+out:
-+ return ret;
-+}
-+
-+static int armada38x_rtc_alarm_irq_enable(struct device *dev,
-+ unsigned int enabled)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+
-+ if (enabled)
-+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
-+ else
-+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
-+
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
-+{
-+ struct armada38x_rtc *rtc = data;
-+ u32 val;
-+ int event = RTC_IRQF | RTC_AF;
-+
-+ dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
-+
-+ spin_lock(&rtc->lock);
-+
-+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
-+
-+ writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
-+ val = readl(rtc->regs + RTC_IRQ1_CONF);
-+ /* disable all the interrupts for alarm 1 */
-+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
-+ /* Ack the event */
-+ rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS);
-+
-+ spin_unlock(&rtc->lock);
-+
-+ if (val & RTC_IRQ1_FREQ_EN) {
-+ if (val & RTC_IRQ1_FREQ_1HZ)
-+ event |= RTC_UF;
-+ else
-+ event |= RTC_PF;
-+ }
-+
-+ rtc_update_irq(rtc->rtc_dev, 1, event);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct rtc_class_ops armada38x_rtc_ops = {
-+ .read_time = armada38x_rtc_read_time,
-+ .set_time = armada38x_rtc_set_time,
-+ .read_alarm = armada38x_rtc_read_alarm,
-+ .set_alarm = armada38x_rtc_set_alarm,
-+ .alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
-+};
-+
-+static __init int armada38x_rtc_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct armada38x_rtc *rtc;
-+ int ret;
-+
-+ rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
-+ GFP_KERNEL);
-+ if (!rtc)
-+ return -ENOMEM;
-+
-+ spin_lock_init(&rtc->lock);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
-+ rtc->regs = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(rtc->regs))
-+ return PTR_ERR(rtc->regs);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
-+ rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(rtc->regs_soc))
-+ return PTR_ERR(rtc->regs_soc);
-+
-+ rtc->irq = platform_get_irq(pdev, 0);
-+
-+ if (rtc->irq < 0) {
-+ dev_err(&pdev->dev, "no irq\n");
-+ return rtc->irq;
-+ }
-+ if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
-+ 0, pdev->name, rtc) < 0) {
-+ dev_warn(&pdev->dev, "Interrupt not available.\n");
-+ rtc->irq = -1;
-+ /*
-+ * If there is no interrupt available then we can't
-+ * use the alarm
-+ */
-+ armada38x_rtc_ops.set_alarm = NULL;
-+ armada38x_rtc_ops.alarm_irq_enable = NULL;
-+ }
-+ platform_set_drvdata(pdev, rtc);
-+ if (rtc->irq != -1)
-+ device_init_wakeup(&pdev->dev, 1);
-+
-+ rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
-+ &armada38x_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtc_dev)) {
-+ ret = PTR_ERR(rtc->rtc_dev);
-+ dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int armada38x_rtc_suspend(struct device *dev)
-+{
-+ if (device_may_wakeup(dev)) {
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+
-+ return enable_irq_wake(rtc->irq);
-+ }
-+
-+ return 0;
-+}
-+
-+static int armada38x_rtc_resume(struct device *dev)
-+{
-+ if (device_may_wakeup(dev)) {
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+
-+ return disable_irq_wake(rtc->irq);
-+ }
-+
-+ return 0;
-+}
-+#endif
-+
-+static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
-+ armada38x_rtc_suspend, armada38x_rtc_resume);
-+
-+#ifdef CONFIG_OF
-+static const struct of_device_id armada38x_rtc_of_match_table[] = {
-+ { .compatible = "marvell,armada-380-rtc", },
-+ {}
-+};
-+#endif
-+
-+static struct platform_driver armada38x_rtc_driver = {
-+ .driver = {
-+ .name = "armada38x-rtc",
-+ .pm = &armada38x_rtc_pm_ops,
-+ .of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
-+ },
-+};
-+
-+module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
-+
-+MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
-+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
-+MODULE_LICENSE("GPL");
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1136,6 +1136,7 @@ M: Sebastian Hesselbarth <sebastian.hess
- L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
- S: Maintained
- F: arch/arm/mach-mvebu/
-+F: drivers/rtc/armada38x-rtc
-
- ARM/Marvell Berlin SoC support
- M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -420,6 +420,13 @@
- clocks = <&gateclk 4>;
- };
-
-+ rtc@a3800 {
-+ compatible = "marvell,armada-380-rtc";
-+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-+ reg-names = "rtc", "rtc-soc";
-+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- sata@a8000 {
- compatible = "marvell,armada-380-ahci";
- reg = <0xa8000 0x2000>;
+++ /dev/null
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -16,6 +16,7 @@
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
-+#include <linux/usb/phy.h>
- #include <linux/slab.h>
- #include <linux/usb/xhci_pdriver.h>
-
-@@ -158,12 +159,27 @@ static int xhci_plat_probe(struct platfo
- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
- xhci->shared_hcd->can_do_streams = 1;
-
-+ hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
-+ if (IS_ERR(hcd->usb_phy)) {
-+ ret = PTR_ERR(hcd->usb_phy);
-+ if (ret == -EPROBE_DEFER)
-+ goto put_usb3_hcd;
-+ hcd->usb_phy = NULL;
-+ } else {
-+ ret = usb_phy_init(hcd->usb_phy);
-+ if (ret)
-+ goto put_usb3_hcd;
-+ }
-+
- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
- if (ret)
-- goto put_usb3_hcd;
-+ goto disable_usb_phy;
-
- return 0;
-
-+disable_usb_phy:
-+ usb_phy_shutdown(hcd->usb_phy);
-+
- put_usb3_hcd:
- usb_put_hcd(xhci->shared_hcd);
-
-@@ -187,6 +203,7 @@ static int xhci_plat_remove(struct platf
- struct clk *clk = xhci->clk;
-
- usb_remove_hcd(xhci->shared_hcd);
-+ usb_phy_shutdown(hcd->usb_phy);
- usb_put_hcd(xhci->shared_hcd);
-
- usb_remove_hcd(hcd);
+++ /dev/null
-From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 16 Feb 2015 13:31:04 +0100
-Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support
-
-The Linksys WRT1900AC (Mamba) is a router that has
-
-- 2 mini-PCIe slots with Marvell 88W8864 radios
-- 1 USB 3.0 port
-- 1 USB 2.0/eSATAp port
-- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN)
-- 128MB NAND flash
-- 256MB RAM
-
-gregory.clement@free-electrons.com: - add ARM to the title
- - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
- - fix the unbalanced comment for the syscfg partition
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++
- 2 files changed, 349 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-lenovo-ix4-300d.dtb \
-+ armada-xp-linksys-mamba.dtb \
- armada-xp-matrix.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -0,0 +1,348 @@
-+/*
-+ * Device Tree file for the Linksys WRT1900AC (Mamba).
-+ *
-+ * Note: this board is shipped with a new generation boot loader that
-+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
-+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
-+ * used.
-+ *
-+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Based on armada-xp-axpwifiap.dts:
-+ *
-+ * Copyright (C) 2013 Marvell
-+ *
-+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include "armada-xp-mv78230.dtsi"
-+
-+/ {
-+ model = "Linksys WRT1900AC";
-+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-+ "marvell,armadaxp", "marvell,armada-370-xp";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ stdout-path = &uart0;
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
-+ };
-+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-+
-+ pcie-controller {
-+ status = "okay";
-+
-+ /* Etron EJ168 USB 3.0 controller */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ /* First mini-PCIe port */
-+ pcie@2,0 {
-+ /* Port 0, Lane 1 */
-+ status = "okay";
-+ };
-+
-+ /* Second mini-PCIe port */
-+ pcie@3,0 {
-+ /* Port 0, Lane 3 */
-+ status = "okay";
-+ };
-+ };
-+
-+ internal-regs {
-+
-+ /* J10: VCC, NC, RX, NC, TX, GND */
-+ serial@12000 {
-+ status = "okay";
-+ };
-+
-+ sata@a0000 {
-+ nr-ports = <1>;
-+ status = "okay";
-+ };
-+
-+ ethernet@70000 {
-+ pinctrl-0 = <&ge0_rgmii_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ ethernet@74000 {
-+ pinctrl-0 = <&ge1_rgmii_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ /* USB part of the eSATA/USB 2.0 port */
-+ usb@50000 {
-+ status = "okay";
-+ };
-+
-+ i2c@11000 {
-+ status = "okay";
-+ clock-frequency = <100000>;
-+
-+ tmp421@4c {
-+ compatible = "ti,tmp421";
-+ reg = <0x4c>;
-+ };
-+
-+ tlc59116@68 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ #gpio-cells = <2>;
-+ compatible = "ti,tlc59116";
-+ reg = <0x68>;
-+
-+ wan_amber@0 {
-+ label = "mamba:amber:wan";
-+ reg = <0x0>;
-+ };
-+
-+ wan_white@1 {
-+ label = "mamba:white:wan";
-+ reg = <0x1>;
-+ };
-+
-+ wlan_2g@2 {
-+ label = "mamba:white:wlan_2g";
-+ reg = <0x2>;
-+ };
-+
-+ wlan_5g@3 {
-+ label = "mamba:white:wlan_5g";
-+ reg = <0x3>;
-+ };
-+
-+ esata@4 {
-+ label = "mamba:white:esata";
-+ reg = <0x4>;
-+ };
-+
-+ usb2@5 {
-+ label = "mamba:white:usb2";
-+ reg = <0x5>;
-+ };
-+
-+ usb3_1@6 {
-+ label = "mamba:white:usb3_1";
-+ reg = <0x6>;
-+ };
-+
-+ usb3_2@7 {
-+ label = "mamba:white:usb3_2";
-+ reg = <0x7>;
-+ };
-+
-+ wps_white@8 {
-+ label = "mamba:white:wps";
-+ reg = <0x8>;
-+ };
-+
-+ wps_amber@9 {
-+ label = "mamba:amber:wps";
-+ reg = <0x9>;
-+ };
-+ };
-+ };
-+
-+ nand@d0000 {
-+ status = "okay";
-+ num-cs = <1>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>; /* 1MB */
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "u_env";
-+ reg = <0x100000 0x40000>; /* 256KB */
-+ };
-+
-+ partition@140000 {
-+ label = "s_env";
-+ reg = <0x140000 0x40000>; /* 256KB */
-+ };
-+
-+ partition@900000 {
-+ label = "devinfo";
-+ reg = <0x900000 0x100000>; /* 1MB */
-+ read-only;
-+ };
-+
-+ /* kernel1 overlaps with rootfs1 by design */
-+ partition@a00000 {
-+ label = "kernel1";
-+ reg = <0xa00000 0x2800000>; /* 40MB */
-+ };
-+
-+ partition@d00000 {
-+ label = "rootfs1";
-+ reg = <0xd00000 0x2500000>; /* 37MB */
-+ };
-+
-+ /* kernel2 overlaps with rootfs2 by design */
-+ partition@3200000 {
-+ label = "kernel2";
-+ reg = <0x3200000 0x2800000>; /* 40MB */
-+ };
-+
-+ partition@3500000 {
-+ label = "rootfs2";
-+ reg = <0x3500000 0x2500000>; /* 37MB */
-+ };
-+
-+ /*
-+ * 38MB, last MB is for the BBT, not writable
-+ */
-+ partition@5a00000 {
-+ label = "syscfg";
-+ reg = <0x5a00000 0x2600000>;
-+ };
-+
-+ /*
-+ * Unused area between "s_env" and "devinfo".
-+ * Moved here because otherwise the renumbered
-+ * partitions would break the bootloader
-+ * supplied bootargs
-+ */
-+ partition@180000 {
-+ label = "unused_area";
-+ reg = <0x180000 0x780000>; /* 7.5MB */
-+ };
-+ };
-+
-+ spi0: spi@10600 {
-+ status = "okay";
-+
-+ spi-flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "everspin,mr25h256";
-+ reg = <0>; /* Chip select 0 */
-+ spi-max-frequency = <40000000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&keys_pin>;
-+ pinctrl-names = "default";
-+
-+ button@1 {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ button@2 {
-+ label = "Factory Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&power_led_pin>;
-+ pinctrl-names = "default";
-+
-+ power {
-+ label = "mamba:white:power";
-+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ gpio_fan {
-+ /* SUNON HA4010V4-0000-C99 */
-+ compatible = "gpio-fan";
-+ gpios = <&gpio0 24 0>;
-+
-+ gpio-fan,speed-map = <0 0
-+ 4500 1>;
-+ };
-+};
-+
-+&pinctrl {
-+
-+ keys_pin: keys-pin {
-+ marvell,pins = "mpp32", "mpp33";
-+ marvell,function = "gpio";
-+ };
-+
-+ power_led_pin: power-led-pin {
-+ marvell,pins = "mpp40";
-+ marvell,function = "gpio";
-+ };
-+
-+ gpio_fan_pin: gpio-fan-pin {
-+ marvell,pins = "mpp24";
-+ marvell,function = "gpio";
-+ };
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -84,12 +84,100 @@
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -415,6 +415,16 @@
- gpio-fan,speed-map = <0 0
- 4500 1>;
- };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6172";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ };
- };
-
- &pinctrl {
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -621,6 +621,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
- armada-375-db.dtb
- dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db-ap.dtb \
-+ armada-385-linksys-caiman.dtb \
-+ armada-385-linksys-cobra.dtb \
- armada-388-db.dtb \
- armada-388-gp.dtb \
- armada-388-rd.dtb
+++ /dev/null
-From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 11 Dec 2014 14:14:58 +0100
-Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller
-
-The A385 AP has a 1GB NAND chip. Enable it.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -150,6 +150,19 @@
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-+
-+ nfc: flash@d0000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ num-cs = <1>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ };
- };
-
- pcie-controller {
+++ /dev/null
-Document the binding for the TLC59116 LED driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-@@ -0,0 +1,40 @@
-+LEDs connected to tcl59116
-+
-+Required properties
-+- compatible: should be "ti,tlc59116"
-+- #address-cells: must be 1
-+- #size-cells: must be 0
-+- reg: typically 0x68
-+
-+Each led is represented as a sub-node of the ti,,tlc59116.
-+See Documentation/devicetree/bindings/leds/common.txt
-+
-+LED sub-node properties:
-+- reg: number of LED line, 0 to 15
-+- label: (optional) name of LED
-+- linux,default-trigger : (optional)
-+
-+Examples:
-+
-+tlc59116@68 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "ti,tlc59116";
-+ reg = <0x68>;
-+
-+ wan@0 {
-+ label = "wrt1900ac:amber:wan";
-+ reg = <0x0>;
-+ };
-+
-+ 2g@2 {
-+ label = "wrt1900ac:white:2g";
-+ reg = <0x2>;
-+ };
-+
-+ alive@9 {
-+ label = "wrt1900ac:green:alive";
-+ reg = <0x9>;
-+ linux,default_trigger = "heartbeat";
-+ };
-+};
+++ /dev/null
-The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED
-output has its own 8-bit fixed-frequency PWM controller to control the
-brightness of the LED.
-
-This is based on a driver from Belkin, but has been extensively
-rewritten.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/leds/Kconfig | 8 ++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 261 insertions(+)
- create mode 100644 drivers/leds/leds-tlc59116.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -467,6 +467,14 @@ config LEDS_TCA6507
- LED driver chips accessed via the I2C bus.
- Driver support brightness control and hardware-assisted blinking.
-
-+config LEDS_TLC59116
-+ tristate "LED driver for TLC59116F controllers"
-+ depends on LEDS_CLASS && I2C
-+ select REGMAP_I2C
-+ help
-+ This option enables support for Texas Instruments TLC59116F
-+ LED controller.
-+
- config LEDS_MAX8997
- tristate "LED support for MAX8997 PMIC"
- depends on LEDS_CLASS && MFD_MAX8997
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp850
- obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
- obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
- obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
-+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
---- /dev/null
-+++ b/drivers/leds/leds-tlc59116.c
-@@ -0,0 +1,252 @@
-+/*
-+ * Copyright 2014 Belkin Inc.
-+ * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+ */
-+
-+#include <linux/i2c.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define TLC59116_LEDS 16
-+
-+#define TLC59116_REG_MODE1 0x00
-+#define MODE1_RESPON_ADDR_MASK 0xF0
-+#define MODE1_NORMAL_MODE (0 << 4)
-+#define MODE1_SPEED_MODE (1 << 4)
-+
-+#define TLC59116_REG_MODE2 0x01
-+#define MODE2_DIM (0 << 5)
-+#define MODE2_BLINK (1 << 5)
-+#define MODE2_OCH_STOP (0 << 3)
-+#define MODE2_OCH_ACK (1 << 3)
-+
-+#define TLC59116_REG_PWM(x) (0x02 + (x))
-+
-+#define TLC59116_REG_GRPPWM 0x12
-+#define TLC59116_REG_GRPFREQ 0x13
-+
-+/* LED Driver Output State, determine the source that drives LED outputs */
-+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2))
-+#define TLC59116_LED_OFF 0x0 /* Output LOW */
-+#define TLC59116_LED_ON 0x1 /* Output HI-Z */
-+#define TLC59116_DIM 0x2 /* Dimming */
-+#define TLC59116_BLINK 0x3 /* Blinking */
-+#define LED_MASK 0x3
-+
-+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev)
-+#define work_to_led(work) container_of(work, struct tlc59116_led, work)
-+
-+struct tlc59116_led {
-+ bool active;
-+ struct regmap *regmap;
-+ unsigned int led_no;
-+ struct led_classdev ldev;
-+ struct work_struct work;
-+};
-+
-+struct tlc59116_priv {
-+ struct tlc59116_led leds[TLC59116_LEDS];
-+};
-+
-+static int
-+tlc59116_set_mode(struct regmap *regmap, u8 mode)
-+{
-+ int err;
-+ u8 val;
-+
-+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
-+ mode = MODE2_DIM;
-+
-+ /* Configure MODE1 register */
-+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
-+ if (err)
-+ return err;
-+
-+ /* Configure MODE2 Reg */
-+ val = MODE2_OCH_STOP | mode;
-+
-+ return regmap_write(regmap, TLC59116_REG_MODE2, val);
-+}
-+
-+static int
-+tlc59116_set_led(struct tlc59116_led *led, u8 val)
-+{
-+ struct regmap *regmap = led->regmap;
-+ unsigned int i = (led->led_no % 4) * 2;
-+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no);
-+ unsigned int mask = LED_MASK << i;
-+
-+ val = val << i;
-+
-+ return regmap_update_bits(regmap, addr, mask, val);
-+}
-+
-+static void
-+tlc59116_led_work(struct work_struct *work)
-+{
-+ struct tlc59116_led *led = work_to_led(work);
-+ struct regmap *regmap = led->regmap;
-+ int err;
-+ u8 pwm;
-+
-+ pwm = TLC59116_REG_PWM(led->led_no);
-+ err = regmap_write(regmap, pwm, led->ldev.brightness);
-+ if (err)
-+ dev_err(led->ldev.dev, "Failed setting brightness\n");
-+}
-+
-+static void
-+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ struct tlc59116_led *led = ldev_to_led(led_cdev);
-+
-+ led->ldev.brightness = value;
-+ schedule_work(&led->work);
-+}
-+
-+static void
-+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i)
-+{
-+ while (--i >= 0) {
-+ if (priv->leds[i].active) {
-+ led_classdev_unregister(&priv->leds[i].ldev);
-+ cancel_work_sync(&priv->leds[i].work);
-+ }
-+ }
-+}
-+
-+static int
-+tlc59116_configure(struct device *dev,
-+ struct tlc59116_priv *priv,
-+ struct regmap *regmap)
-+{
-+ unsigned int i;
-+ int err = 0;
-+
-+ tlc59116_set_mode(regmap, MODE2_DIM);
-+ for (i = 0; i < TLC59116_LEDS; i++) {
-+ struct tlc59116_led *led = &priv->leds[i];
-+
-+ if (!led->active)
-+ continue;
-+
-+ led->regmap = regmap;
-+ led->led_no = i;
-+ led->ldev.brightness_set = tlc59116_led_set;
-+ led->ldev.max_brightness = LED_FULL;
-+ INIT_WORK(&led->work, tlc59116_led_work);
-+ err = led_classdev_register(dev, &led->ldev);
-+ if (err < 0) {
-+ dev_err(dev, "couldn't register LED %s\n",
-+ led->ldev.name);
-+ goto exit;
-+ }
-+ tlc59116_set_led(led, TLC59116_DIM);
-+ }
-+
-+ return 0;
-+
-+exit:
-+ tlc59116_destroy_devices(priv, i);
-+ return err;
-+}
-+
-+static const struct regmap_config tlc59116_regmap = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .max_register = 0x1e,
-+};
-+
-+static int
-+tlc59116_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+ struct device *dev = &client->dev;
-+ struct device_node *np = client->dev.of_node, *child;
-+ struct regmap *regmap;
-+ int err, count, reg;
-+
-+ count = of_get_child_count(np);
-+ if (!count || count > TLC59116_LEDS)
-+ return -EINVAL;
-+
-+ if (!i2c_check_functionality(client->adapter,
-+ I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -EIO;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
-+ if (IS_ERR(regmap)) {
-+ err = PTR_ERR(regmap);
-+ dev_err(dev, "Failed to allocate register map: %d\n", err);
-+ return err;
-+ }
-+
-+ i2c_set_clientdata(client, priv);
-+
-+ for_each_child_of_node(np, child) {
-+ err = of_property_read_u32(child, "reg", ®);
-+ if (err)
-+ return err;
-+ if (reg < 0 || reg >= TLC59116_LEDS)
-+ return -EINVAL;
-+ if (priv->leds[reg].active)
-+ return -EINVAL;
-+ priv->leds[reg].active = true;
-+ priv->leds[reg].ldev.name =
-+ of_get_property(child, "label", NULL) ? : child->name;
-+ priv->leds[reg].ldev.default_trigger =
-+ of_get_property(child, "linux,default-trigger", NULL);
-+ }
-+ return tlc59116_configure(dev, priv, regmap);
-+}
-+
-+static int
-+tlc59116_remove(struct i2c_client *client)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+
-+ tlc59116_destroy_devices(priv, TLC59116_LEDS);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id of_tlc59116_leds_match[] = {
-+ { .compatible = "ti,tlc59116", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
-+
-+static const struct i2c_device_id tlc59116_id[] = {
-+ { "tlc59116" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
-+
-+static struct i2c_driver tlc59116_driver = {
-+ .driver = {
-+ .name = "tlc59116",
-+ .of_match_table = of_match_ptr(of_tlc59116_leds_match),
-+ },
-+ .probe = tlc59116_probe,
-+ .remove = tlc59116_remove,
-+ .id_table = tlc59116_id,
-+};
-+
-+module_i2c_driver(tlc59116_driver);
-+
-+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("TLC59116 LED driver");
+++ /dev/null
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct device_node *node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i;
-
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- (*pparts)[i].offset = of_read_number(reg, a_cells);
- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- (*pparts)[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -88,12 +88,10 @@
- };
-
- i2c0: i2c@11000 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c@11100 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
+++ /dev/null
-Armada 370/XP devices can 'blink' gpio lines with a configurable on
-and off period. This can be modelled as a PWM.
-
-However, there are only two sets of PWM configuration registers for
-all the gpio lines. This driver simply allows a single gpio line per
-gpio chip of 32 lines to be used as a PWM. Attempts to use more return
-EBUSY.
-
-Due to the interleaving of registers it is not simple to separate the
-PWM driver from the gpio driver. Thus the gpio driver has been
-extended with a PWM driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/Kconfig | 5 ++
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpio-mvebu.c | 37 +++-----
- drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++
- 5 files changed, 299 insertions(+), 25 deletions(-)
- create mode 100644 drivers/gpio/gpio-mvebu-pwm.c
- create mode 100644 drivers/gpio/gpio-mvebu.h
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -246,6 +246,11 @@ config GPIO_MVEBU
- select GPIO_GENERIC
- select GENERIC_IRQ_CHIP
-
-+config GPIO_MVEBU_PWM
-+ def_bool y
-+ depends on GPIO_MVEBU
-+ depends on PWM
-+
- config GPIO_MXC
- def_bool y
- depends on ARCH_MXC
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
- obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
- obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
-+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
- obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu-pwm.c
-@@ -0,0 +1,202 @@
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/gpio.h>
-+#include <linux/pwm.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include "gpio-mvebu.h"
-+#include "gpiolib.h"
-+
-+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip)
-+{
-+ return mvchip->membase + GPIO_BLINK_CNT_SELECT;
-+}
-+
-+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mvebu_pwm, chip);
-+}
-+
-+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm)
-+{
-+ return container_of(pwm, struct mvebu_gpio_chip, pwm);
-+}
-+
-+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ if (pwm->used) {
-+ ret = -EBUSY;
-+ } else {
-+ if (!desc) {
-+ ret = -ENODEV;
-+ goto out;
-+ }
-+ ret = gpiod_request(desc, "mvebu-pwm");
-+ if (ret)
-+ goto out;
-+
-+ ret = gpiod_direction_output(desc, 0);
-+ if (ret) {
-+ gpiod_free(desc);
-+ goto out;
-+ }
-+
-+ pwm->pin = pwmd->pwm - mvchip->chip.base;
-+ pwm->used = true;
-+ }
-+
-+out:
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return ret;
-+}
-+
-+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ gpiod_free(desc);
-+ pwm->used = false;
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+}
-+
-+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd,
-+ int duty_ns, int period_ns)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ unsigned int on, off;
-+ unsigned long long val;
-+ u32 u;
-+
-+ val = (unsigned long long) pwm->clk_rate * duty_ns;
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ on = val;
-+ else
-+ on = 1;
-+
-+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns);
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ off = val;
-+ else
-+ off = 1;
-+
-+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ u &= ~(1 << pwm->pin);
-+ u |= (pwm->id << pwm->pin);
-+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip));
-+
-+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION);
-+
-+ return 0;
-+}
-+
-+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1);
-+
-+ return 0;
-+}
-+
-+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0);
-+}
-+
-+static const struct pwm_ops mvebu_pwm_ops = {
-+ .request = mvebu_pwm_request,
-+ .free = mvebu_pwm_free,
-+ .config = mvebu_pwm_config,
-+ .enable = mvebu_pwm_enable,
-+ .disable = mvebu_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ pwm->blink_on_duration =
-+ readl_relaxed(pwm->membase + BLINK_ON_DURATION);
-+ pwm->blink_off_duration =
-+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip));
-+ writel_relaxed(pwm->blink_on_duration,
-+ pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(pwm->blink_off_duration,
-+ pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+/*
-+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs
-+ * don't have this hardware. So if we don't have the necessary
-+ * resource, it is not an error.
-+ */
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+ struct resource *res;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
-+ if (!res)
-+ return 0;
-+
-+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mvchip->pwm.membase))
-+ return PTR_ERR(mvchip->percpu_membase);
-+
-+ if (id < 0 || id > 1)
-+ return -EINVAL;
-+ pwm->id = id;
-+
-+ if (IS_ERR(mvchip->clk))
-+ return PTR_ERR(mvchip->clk);
-+
-+ pwm->clk_rate = clk_get_rate(mvchip->clk);
-+ if (!pwm->clk_rate) {
-+ dev_err(dev, "failed to get clock rate\n");
-+ return -EINVAL;
-+ }
-+
-+ pwm->chip.dev = dev;
-+ pwm->chip.ops = &mvebu_pwm_ops;
-+ pwm->chip.base = mvchip->chip.base;
-+ pwm->chip.npwm = mvchip->chip.ngpio;
-+ pwm->chip.can_sleep = false;
-+
-+ spin_lock_init(&pwm->lock);
-+
-+ return pwmchip_add(&pwm->chip);
-+}
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -42,10 +42,11 @@
- #include <linux/io.h>
- #include <linux/of_irq.h>
- #include <linux/of_device.h>
-+#include <linux/pwm.h>
- #include <linux/clk.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/irqchip/chained_irq.h>
--
-+#include "gpio-mvebu.h"
- /*
- * GPIO unit register offsets.
- */
-@@ -75,24 +76,6 @@
-
- #define MVEBU_MAX_GPIO_PER_BANK 32
-
--struct mvebu_gpio_chip {
-- struct gpio_chip chip;
-- spinlock_t lock;
-- void __iomem *membase;
-- void __iomem *percpu_membase;
-- int irqbase;
-- struct irq_domain *domain;
-- int soc_variant;
--
-- /* Used to preserve GPIO registers across suspend/resume */
-- u32 out_reg;
-- u32 io_conf_reg;
-- u32 blink_en_reg;
-- u32 in_pol_reg;
-- u32 edge_mask_regs[4];
-- u32 level_mask_regs[4];
--};
--
- /*
- * Functions returning addresses of individual registers for a given
- * GPIO controller.
-@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch
- return (u >> pin) & 1;
- }
-
--static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
- {
- struct mvebu_gpio_chip *mvchip =
- container_of(chip, struct mvebu_gpio_chip, chip);
-@@ -617,6 +600,8 @@ static int mvebu_gpio_suspend(struct pla
- BUG();
- }
-
-+ mvebu_pwm_suspend(mvchip);
-+
- return 0;
- }
-
-@@ -660,6 +645,8 @@ static int mvebu_gpio_resume(struct plat
- BUG();
- }
-
-+ mvebu_pwm_resume(mvchip);
-+
- return 0;
- }
-
-@@ -671,7 +658,6 @@ static int mvebu_gpio_probe(struct platf
- struct resource *res;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-- struct clk *clk;
- unsigned int ngpios;
- int soc_variant;
- int i, cpu, id;
-@@ -701,10 +687,10 @@ static int mvebu_gpio_probe(struct platf
- return id;
- }
-
-- clk = devm_clk_get(&pdev->dev, NULL);
-+ mvchip->clk = devm_clk_get(&pdev->dev, NULL);
- /* Not all SoCs require a clock.*/
-- if (!IS_ERR(clk))
-- clk_prepare_enable(clk);
-+ if (!IS_ERR(mvchip->clk))
-+ clk_prepare_enable(mvchip->clk);
-
- mvchip->soc_variant = soc_variant;
- mvchip->chip.label = dev_name(&pdev->dev);
-@@ -838,7 +824,8 @@ static int mvebu_gpio_probe(struct platf
- goto err_generic_chip;
- }
-
-- return 0;
-+ /* Armada 370/XP has simple PWM support for gpio lines */
-+ return mvebu_pwm_probe(pdev, mvchip, id);
-
- err_generic_chip:
- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu.h
-@@ -0,0 +1,79 @@
-+/*
-+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins
-+ *
-+ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef MVEBU_GPIO_PWM_H
-+#define MVEBU_GPIO_PWM_H
-+
-+#define BLINK_ON_DURATION 0x0
-+#define BLINK_OFF_DURATION 0x4
-+#define GPIO_BLINK_CNT_SELECT 0x0020
-+
-+struct mvebu_pwm {
-+ void __iomem *membase;
-+ unsigned long clk_rate;
-+ bool used;
-+ unsigned pin;
-+ struct pwm_chip chip;
-+ int id;
-+ spinlock_t lock;
-+
-+ /* Used to preserve GPIO/PWM registers across suspend /
-+ * resume */
-+ u32 blink_select;
-+ u32 blink_on_duration;
-+ u32 blink_off_duration;
-+};
-+
-+struct mvebu_gpio_chip {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ void __iomem *percpu_membase;
-+ int irqbase;
-+ struct irq_domain *domain;
-+ int soc_variant;
-+ struct clk *clk;
-+#ifdef CONFIG_PWM
-+ struct mvebu_pwm pwm;
-+#endif
-+ /* Used to preserve GPIO registers across suspend/resume */
-+ u32 out_reg;
-+ u32 io_conf_reg;
-+ u32 blink_en_reg;
-+ u32 in_pol_reg;
-+ u32 edge_mask_regs[4];
-+ u32 level_mask_regs[4];
-+};
-+
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value);
-+
-+#ifdef CONFIG_PWM
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id);
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip);
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip);
-+#else
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ return 0;
-+}
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+#endif
-+#endif
+++ /dev/null
-Document the optional parameters needed for PWM operation of gpio
-lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-@@ -38,6 +38,23 @@ Required properties:
- - #gpio-cells: Should be two. The first cell is the pin number. The
- second cell is reserved for flags, unused at the moment.
-
-+Optional properties:
-+
-+In order to use the gpio lines in PWM mode, some additional optional
-+properties are required. Only Armada 370 and XP supports these
-+properties.
-+
-+- reg: an additional register set is needed, for the GPIO Blink
-+ Counter on/off registers.
-+
-+- reg-names: Must contain an entry "pwm" corresponding to the
-+ additional register range needed for pwm operation.
-+
-+- #pwm-cells: Should be two. The first cell is the pin number. The
-+ second cell is reserved for flags, unused at the moment.
-+
-+- clocks: Must be a phandle to the clock for the gpio controller.
-+
- Example:
-
- gpio0: gpio@d0018100 {
-@@ -51,3 +68,17 @@ Example:
- #interrupt-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
- };
-+
-+ gpio1: gpio@18140 {
-+ compatible = "marvell,orion-gpio";
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
-+ ngpios = <17>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #pwm-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
-+ };
+++ /dev/null
-Add properties to the gpio nodes to allow them to be also used
-as pwm lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++--
- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
- 4 files changed, 30 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -157,24 +157,30 @@
-
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -203,24 +203,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <17>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -287,24 +287,28 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -325,24 +325,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
+++ /dev/null
-Now that the gpio driver also supports PWM operation, enable
-the PWM framework in mvebu_v7_defconfig.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/configs/mvebu_v7_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/configs/mvebu_v7_defconfig
-+++ b/arch/arm/configs/mvebu_v7_defconfig
-@@ -118,6 +118,7 @@ CONFIG_DMADEVICES=y
- CONFIG_MV_XOR=y
- # CONFIG_IOMMU_SUPPORT is not set
- CONFIG_MEMORY=y
-+CONFIG_PWM=y
- CONFIG_EXT4_FS=y
- CONFIG_ISO9660_FS=y
- CONFIG_JOLIET=y
+++ /dev/null
-The mvebu gpio driver can also perform PWM on some pins. Us the
-pwm-fan driver to control the fan of the WRT1900AC, giving us fine
-grain control over its speed and hence noise.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -407,13 +407,11 @@
- };
- };
-
-- gpio_fan {
-+ pwm_fan {
- /* SUNON HA4010V4-0000-C99 */
-- compatible = "gpio-fan";
-- gpios = <&gpio0 24 0>;
-
-- gpio-fan,speed-map = <0 0
-- 4500 1>;
-+ compatible = "pwm-fan";
-+ pwms = <&gpio0 24 4000 0>;
- };
-
- mvsw61xx {
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -77,6 +77,16 @@
- compatible = "st,m25p128";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
+++ /dev/null
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -162,6 +162,21 @@
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-+
-+ mtd0@00000000 {
-+ label = "u-boot";
-+ reg = <0x00000000 0x00800000>;
-+ };
-+
-+ mtd1@00800000 {
-+ label = "kernel";
-+ reg = <0x00800000 0x00800000>;
-+ };
-+
-+ mtd2@01000000 {
-+ label = "ubi";
-+ reg = <0x01000000 0x3f000000>;
-+ };
- };
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -491,7 +491,7 @@
- status = "disabled";
- };
-
-- mdio@72004 {
-+ mdio: mdio@72004 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
+++ /dev/null
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -16,6 +16,7 @@
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
-+#include <linux/usb/phy.h>
- #include <linux/slab.h>
- #include <linux/usb/xhci_pdriver.h>
-
-@@ -155,12 +156,27 @@ static int xhci_plat_probe(struct platfo
- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
- xhci->shared_hcd->can_do_streams = 1;
-
-+ hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
-+ if (IS_ERR(hcd->usb_phy)) {
-+ ret = PTR_ERR(hcd->usb_phy);
-+ if (ret == -EPROBE_DEFER)
-+ goto put_usb3_hcd;
-+ hcd->usb_phy = NULL;
-+ } else {
-+ ret = usb_phy_init(hcd->usb_phy);
-+ if (ret)
-+ goto put_usb3_hcd;
-+ }
-+
- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
- if (ret)
-- goto put_usb3_hcd;
-+ goto disable_usb_phy;
-
- return 0;
-
-+disable_usb_phy:
-+ usb_phy_shutdown(hcd->usb_phy);
-+
- put_usb3_hcd:
- usb_put_hcd(xhci->shared_hcd);
-
-@@ -184,6 +200,7 @@ static int xhci_plat_remove(struct platf
- struct clk *clk = xhci->clk;
-
- usb_remove_hcd(xhci->shared_hcd);
-+ usb_phy_shutdown(hcd->usb_phy);
- usb_put_hcd(xhci->shared_hcd);
-
- usb_remove_hcd(hcd);
projects / openwrt / staging / wigyori.git / commitdiff