ARCH:=mipsel
BOARD:=adm5120
BOARDNAME:=ADM5120 (Little Endian)
-FEATURES:=squashfs jffs2 pci usb
+FEATURES:=squashfs jffs2 pci usb broken
LINUX_VERSION:=2.6.22.1
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_ADM5120_HARDWARE_SWAB=y
+# CONFIG_ADM5120_HARDWARE_SWAB is not set
CONFIG_ADM5120_NR_UARTS=2
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
CONFIG_ELF_CORE=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SPLIT_ROOTFS is not set
# CONFIG_NETDEV_1000 is not set
CONFIG_NET_KEY=y
# CONFIG_NET_PCI is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_USB=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_USB_ACM is not set
-CONFIG_USB_ADM5120_HCD=y
+CONFIG_USB_ADM5120_HCD=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_CATC is not set
obj-y := setup.o prom.o irq.o memory.o adm5120_info.o
obj-y += gpio.o
obj-y += time.o
+obj-y += reset.o
+obj-y += board.o
+obj-y += platform.o
+obj-y += trxsplit.o
EXTRA_AFLAGS := $(CFLAGS)
/*
- * $Id$
+ * $Id$
*
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
#include <linux/types.h>
-#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
-#include <asm/byteorder.h>
+#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_defs.h>
#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/myloader.h>
-#include <asm/mach-adm5120/routerboot.h>
-#include <asm/mach-adm5120/zynos.h>
-
-extern char *prom_getenv(char *envname);
-/*
- * Globals
- */
-struct adm5120_board adm5120_board;
-EXPORT_SYMBOL_GPL(adm5120_board);
-
-unsigned int adm5120_boot_loader;
unsigned int adm5120_product_code;
unsigned int adm5120_revision;
unsigned int adm5120_package;
unsigned int adm5120_nand_boot;
unsigned long adm5120_speed;
-unsigned long adm5120_memsize;
-
-/*
- * Locals
- */
-static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
- [BOOT_LOADER_UNKNOWN] = "Unknown",
- [BOOT_LOADER_CFE] = "CFE",
- [BOOT_LOADER_UBOOT] = "U-Boot",
- [BOOT_LOADER_MYLOADER] = "MyLoader",
- [BOOT_LOADER_ROUTERBOOT]= "RouterBOOT",
- [BOOT_LOADER_BOOTBASE] = "Bootbase"
-};
-
-static struct adm5120_board __initdata adm5120_boards[] = {
- /* FIXME: some boards have invalid fields */
- {
- .name = "Cellvision CAS-630/630W",
- .mach_type = MACH_ADM5120_CAS630,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision CAS-670/670W",
- .mach_type = MACH_ADM5120_CAS670,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision CAS-700/700W",
- .mach_type = MACH_ADM5120_CAS700,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision CAS-771/771W",
- .mach_type = MACH_ADM5120_CAS771,
- .has_usb = 0,
- .iface_num = 5,
- .mem_size = (32 << 20),
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision CAS-790",
- .mach_type = MACH_ADM5120_CAS790,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision CAS-861/861W",
- .mach_type = MACH_ADM5120_CAS861,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision NFS-101U/101WU",
- .mach_type = MACH_ADM5120_NFS101U,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Cellvision NFS-202U/202WU",
- .mach_type = MACH_ADM5120_NFS202U,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex NetPassage 27G",
- .mach_type = MACH_ADM5120_NP27G,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex NetPassage 28G",
- .mach_type = MACH_ADM5120_NP28G,
- .has_usb = 0,
- .iface_num = 4,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex NP28G (HotSpot)",
- .mach_type = MACH_ADM5120_NP28GHS,
- .has_usb = 0,
- .iface_num = 4,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex WP54AG",
- .mach_type = MACH_ADM5120_WP54AG,
- .has_usb = 0,
- .iface_num = 2,
- .mem_size = (16 << 20),
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex WP54G",
- .mach_type = MACH_ADM5120_WP54G,
- .has_usb = 0,
- .iface_num = 2,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex WP54G-WRT",
- .mach_type = MACH_ADM5120_WP54G_WRT,
- .has_usb = 0,
- .iface_num = 2,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex WP54G v1C",
- .mach_type = MACH_ADM5120_WP54Gv1C,
- .has_usb = 0,
- .iface_num = 2,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "Compex WPP54AG",
- .mach_type = MACH_ADM5120_WPP54AG,
- .has_usb = 0,
- .iface_num = 2,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Compex WPP54G",
- .mach_type = MACH_ADM5120_WPP54G,
- .has_usb = 0,
- .iface_num = 2,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Edimax BR-6104K",
- .mach_type = MACH_ADM5120_BR6104K,
- .has_usb = 0,
- .iface_num = 5,
- .mem_size = (16 << 20),
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "Infineon EASY 5120",
- .mach_type = MACH_ADM5120_EASY5120,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "Infineon EASY 5120-RT",
- .mach_type = MACH_ADM5120_EASY5120RT,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "Infineon EASY 5120P-ATA",
- .mach_type = MACH_ADM5120_EASY5120PATA,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "Infineon EASY 83000",
- .mach_type = MACH_ADM5120_EASY83000,
- .has_usb = 0,
- .iface_num = 6,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "RouterBOARD 111",
- .mach_type = MACH_ADM5120_RB_111,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 128*1024,
- },
- {
- .name = "RouterBOARD 112",
- .mach_type = MACH_ADM5120_RB_112,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 128*1024,
- },
- {
- .name = "RouterBOARD 133",
- .mach_type = MACH_ADM5120_RB_133,
- .has_usb = 0,
- .iface_num = 3,
- .flash0_size = 128*1024,
- },
- {
- .name = "RouterBOARD 133C",
- .mach_type = MACH_ADM5120_RB_133C,
- .has_usb = 0,
- .iface_num = 1,
- .flash0_size = 128*1024,
- },
- {
- .name = "RouterBOARD 150",
- .mach_type = MACH_ADM5120_RB_150,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 128*1024,
- },
- {
- .name = "RouterBOARD 153",
- .mach_type = MACH_ADM5120_RB_153,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 128*1024,
- },
- {
- .name = "ZyXEL ES-2024A",
- .mach_type = MACH_ADM5120_ES2024A,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2024PWR",
- .mach_type = MACH_ADM5120_ES2024PWR,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2108",
- .mach_type = MACH_ADM5120_ES2108,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2108-F",
- .mach_type = MACH_ADM5120_ES2108F,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2108-G",
- .mach_type = MACH_ADM5120_ES2108G,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2108-LC",
- .mach_type = MACH_ADM5120_ES2108LC,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL ES-2108-PWR",
- .mach_type = MACH_ADM5120_ES2108PWR,
- .has_usb = 0,
- .iface_num = 0,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL HomeSafe 100/100W",
- .mach_type = MACH_ADM5120_HS100,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334",
- .mach_type = MACH_ADM5120_P334,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334U",
- .mach_type = MACH_ADM5120_P334U,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334W",
- .mach_type = MACH_ADM5120_P334W,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 2*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334WH",
- .mach_type = MACH_ADM5120_P334WH,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334WHD",
- .mach_type = MACH_ADM5120_P334WHD,
- .has_usb = 0,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 334WT",
- .mach_type = MACH_ADM5120_P334WT,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 335/335WT",
- .mach_type = MACH_ADM5120_P335,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 335Plus",
- .mach_type = MACH_ADM5120_P335PLUS,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "ZyXEL Prestige 335U",
- .mach_type = MACH_ADM5120_P335U,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- },
- {
- .name = "Unknown ADM5120 board",
- .mach_type = MACH_ADM5120_UNKNOWN,
- .has_usb = 1,
- .iface_num = 5,
- .flash0_size = 4*1024*1024,
- }
-};
-
-#define DUMMY_BOARD() {.mach_type = MACH_ADM5120_UNKNOWN}
-
-struct mylo_board {
- u16 vid;
- u16 did;
- u16 svid;
- u16 sdid;
- unsigned long mach_type;
-};
-
-
-#define MYLO_BOARD(v,d,sv,sd,mt) { .vid = (v), .did = (d), .svid = (sv), \
- .sdid = (sd), .mach_type = (mt) }
-
-#define COMPEX_BOARD(d,mt) MYLO_BOARD(VENID_COMPEX,(d),VENID_COMPEX,(d),(mt))
-
-static struct mylo_board mylo_boards[] __initdata = {
- COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
- COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
- COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
- COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
- COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
- COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
- COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
- COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
- DUMMY_BOARD()
-};
-
-#define ROUTERBOARD_NAME_LEN 16
-
-struct routerboard {
- unsigned long mach_type;
- char name[ROUTERBOARD_NAME_LEN];
-};
-
-#define ROUTERBOARD(n, mt) { .name = (n), .mach_type = (mt) }
-static struct routerboard routerboards[] __initdata = {
- ROUTERBOARD("111", MACH_ADM5120_RB_111),
- ROUTERBOARD("112", MACH_ADM5120_RB_112),
- ROUTERBOARD("133", MACH_ADM5120_RB_133),
- ROUTERBOARD("133C", MACH_ADM5120_RB_133C),
- ROUTERBOARD("miniROUTER", MACH_ADM5120_RB_150),
- ROUTERBOARD("153", MACH_ADM5120_RB_150),
- DUMMY_BOARD()
-};
-
-struct zynos_board {
- unsigned long mach_type;
- unsigned int vendor_id;
- u16 board_id;
-};
-
-#define ZYNOS_BOARD(vi, bi, mt) { .vendor_id = (vi), .board_id = (bi), \
- .mach_type = (mt) }
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
-
-static struct zynos_board zynos_boards[] __initdata = {
- ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
- ZYXEL_BOARD(ZYNOS_BOARD_P334, MACH_ADM5120_P334),
- ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
- ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
- ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
- ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
- ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U),
- DUMMY_BOARD()
-};
-
-struct common_board {
- char *name;
- unsigned long mach_type;
-};
-
-#define DEFBOARD(n, mt) { .name = (n), .mach_type = (mt) }
-static struct common_board common_boards[] __initdata = {
- DEFBOARD("CAS-630", MACH_ADM5120_CAS630),
- DEFBOARD("CAS-670", MACH_ADM5120_CAS670),
- DEFBOARD("CAS-700", MACH_ADM5120_CAS700),
- DEFBOARD("CAS-771", MACH_ADM5120_CAS771),
- DEFBOARD("CAS-790", MACH_ADM5120_CAS790),
- DEFBOARD("CAS-861", MACH_ADM5120_CAS861),
- DEFBOARD("NFS-101U", MACH_ADM5120_NFS101U),
- DEFBOARD("NFS-202U", MACH_ADM5120_NFS202U),
- DEFBOARD("EASY 5120", MACH_ADM5120_EASY5120),
- DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT),
- DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA),
- DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000),
- DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K),
- DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT),
- DEFBOARD("P-334WT", MACH_ADM5120_P334WT),
- DEFBOARD("P-335", MACH_ADM5120_P335),
-};
-
-/*
- * Helper routines
- */
-static inline u16 read_le16(void *buf)
-{
- u8 *p;
-
- p = buf;
- return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 read_le32(void *buf)
-{
- u8 *p;
-
- p = buf;
- return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
- ((u32)p[3] << 24));
-}
-
-static inline u16 read_be16(void *buf)
-{
- u8 *p;
-
- p = buf;
- return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 read_be32(void *buf)
-{
- u8 *p;
-
- p = buf;
- return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
- ((u32)p[3]));
-}
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int __init cfe_present(void)
-{
- /*
- * This method only works, when we are booted directly from the CFE.
- */
- u32 cfe_handle = (u32) fw_arg0;
- u32 cfe_a1_val = (u32) fw_arg1;
- u32 cfe_entry = (u32) fw_arg2;
- u32 cfe_seal = (u32) fw_arg3;
-
- /* Check for CFE by finding the CFE magic number */
- if (cfe_seal != CFE_EPTSEAL) {
- /* We are not booted from CFE */
- return 0;
- }
-
- /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
- if (cfe_a1_val != 0) {
- return 0;
- }
-
- /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
- if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
- return 0;
- }
-
- return 1;
-}
-
-static unsigned long __init cfe_detect_board(void)
-{
- return MACH_ADM5120_WP54G_WRT;
-}
-
-/*
- * MyLoader based boards
- */
-#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static unsigned long __init myloader_detect_board(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
- struct mylo_board *board;
- unsigned long ret;
-
- ret = MACH_ADM5120_UNKNOWN;
-
- sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
- boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
- parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
- /* Check for some magic numbers */
- if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
- (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
- (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
- goto out;
-
- for (board = mylo_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
- board++) {
- if ((le16_to_cpu(sysp->vid) == board->vid) &&
- (le16_to_cpu(sysp->did) == board->did) &&
- (le16_to_cpu(sysp->svid) == board->svid) &&
- (le16_to_cpu(sysp->sdid) == board->sdid)) {
- ret = board->mach_type;
- break;
- }
- }
-
- /* assume MyLoader as the boot-loader */
- adm5120_boot_loader = BOOT_LOADER_MYLOADER;
-
-out:
- return ret;
-}
-
-/*
- * RouterBOOT based boards
- */
-static int __init routerboot_load_hs(u8 *buf, u16 buflen,
- struct rb_hard_settings *hs)
-{
- u16 id,len;
- u8 *mac;
- int i,j;
-
- if (buflen < 4)
- return -1;
-
- if (read_le32(buf) != RB_MAGIC_HARD)
- return -1;
-
- /* skip magic value */
- buf += 4;
- buflen -= 4;
-
- while (buflen > 2) {
- id = read_le16(buf);
- buf += 2;
- buflen -= 2;
- if (id == RB_ID_TERMINATOR || buflen < 2)
- break;
-
- len = read_le16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < len)
- break;
-
- switch (id) {
- case RB_ID_BIOS_VERSION:
- hs->bios_ver = (char *)buf;
- break;
- case RB_ID_BOARD_NAME:
- hs->name = (char *)buf;
- break;
- case RB_ID_MEMORY_SIZE:
- hs->mem_size = read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_COUNT:
- hs->mac_count = read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_PACK:
- hs->mac_count = len/RB_MAC_SIZE;
- if (hs->mac_count > RB_MAX_MAC_COUNT)
- hs->mac_count = RB_MAX_MAC_COUNT;
- mac = buf;
- for (i=0; i < hs->mac_count; i++) {
- for (j=0; j < RB_MAC_SIZE; j++)
- hs->macs[i][j] = mac[j];
- mac += RB_MAC_SIZE;
- }
- break;
- }
-
- buf += len;
- buflen -= len;
-
- }
-
- return 0;
-}
-
-#define RB_BS_OFFS 0x14
-#define RB_OFFS_MAX (128*1024)
-
-static unsigned long __init routerboot_detect_board(void)
-{
- struct routerboard *board;
- struct rb_hard_settings hs;
- struct rb_bios_settings *bs;
- u8 *base;
- u32 off,len;
- unsigned long ret;
-
- ret = MACH_ADM5120_UNKNOWN;
-
- base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
- bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
- off = read_le32(&bs->hs_offs);
- len = read_le32(&bs->hs_size);
- if (off > RB_OFFS_MAX)
- return ret;
-
- memset(&hs, 0, sizeof(hs));
- if (routerboot_load_hs(base+off, len, &hs) != 0)
- return ret;
-
- /* assume RouterBOOT as the boot-loader */
- adm5120_boot_loader = BOOT_LOADER_ROUTERBOOT;
-
- if (hs.name == NULL)
- return ret;
-
- for (board = routerboards; board->mach_type != MACH_ADM5120_UNKNOWN;
- board++) {
- if (strncmp(board->name, hs.name, strlen(board->name)) == 0) {
- ret = board->mach_type;
- break;
- }
- }
-
- return ret;
-}
-
-/*
- * ZyNOS based boards
- */
-static inline u32 zynos_dbgarea_present(u8 *data)
-{
- u32 t;
-
- t = read_be32(data+5);
- if (t != ZYNOS_MAGIC_DBGAREA1)
- return 0;
-
- t = read_be32(data+9);
- if (t != ZYNOS_MAGIC_DBGAREA2)
- return 0;
-
- return 1;
-}
-
-#define CHECK_VENDOR(n) (strnicmp(vendor,(n),strlen(n)) == 0)
-
-static inline unsigned int zynos_get_vendor_id(struct zynos_board_info *info)
-{
- unsigned char vendor[ZYNOS_NAME_LEN];
- int i;
-
- for (i=0; i<ZYNOS_NAME_LEN; i++)
- vendor[i]=info->vendor[i];
-
- if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
- return ZYNOS_VENDOR_ID_ZYXEL;
-#if 0
- /* TODO: there are no known ADM5120 based boards from other vendors */
- if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
- return ZYNOS_VENDOR_ID_DLINK;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
- return ZYNOS_VENDOR_ID_LUCENT;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
- return ZYNOS_VENDOR_ID_NETGEAR;
-#endif
-
- return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 zynos_get_board_id(struct zynos_board_info *info)
-{
- return read_be16(&info->board_id);
-}
-
-static inline u32 zynos_get_bootext_addr(struct zynos_board_info *info)
-{
- return read_be32(&info->bootext_addr);
-}
-
-
-#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static unsigned long __init zynos_detect_board(void)
-{
- struct zynos_board_info *info;
- struct zynos_board *board;
- unsigned int vendor_id;
- u16 board_id;
- u32 t;
- unsigned long ret;
-
- ret = MACH_ADM5120_UNKNOWN;
- /* check presence of the dbgarea */
- if (zynos_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
- goto out;
-
- info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
- /* check for a valid BootExt address */
- t = zynos_get_bootext_addr(info);
- if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
- goto out;
-
- vendor_id = zynos_get_vendor_id(info);
- board_id = zynos_get_board_id(info);
-
- for (board = zynos_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
- board++) {
- if ((board->vendor_id == vendor_id) &&
- (board->board_id == board_id)) {
- ret = board->mach_type;
- break;
- }
- }
-
- /* assume Bootbase as the boot-loader */
- adm5120_boot_loader = BOOT_LOADER_BOOTBASE;
-
-out:
- return ret;
-}
-
-/*
- * U-Boot based boards
- */
-static int __init uboot_present(void)
-{
- /* FIXME: not yet implemented */
- return 0;
-}
-
-static unsigned long __init uboot_detect_board(void)
-{
- /* FIXME: not yet implemented */
- return MACH_ADM5120_UNKNOWN;
-}
-
-/*
- * Misc boards
- */
-static unsigned long __init prom_detect_board(void)
-{
- char *name;
- unsigned long ret;
- int i;
-
- ret = MACH_ADM5120_UNKNOWN;
- name = prom_getenv("board_name");
- if (name == NULL)
- goto out;
-
- if (*name == '\0')
- goto out;
-
- for (i=0; i<ARRAY_SIZE(common_boards); i++) {
- if (strcmp(common_boards[i].name, name) == 0) {
- ret = common_boards[i].mach_type;
- break;
- }
- }
-
-out:
- return ret;
-}
-
-static void __init adm5120_detect_board(void)
-{
- struct adm5120_board *board;
- unsigned long t;
-
- adm5120_boot_loader = BOOT_LOADER_UNKNOWN;
-
- /* Try to detect board type without bootloader */
- t = routerboot_detect_board();
-
- if (t == MACH_ADM5120_UNKNOWN)
- t = zynos_detect_board();
-
- if (t == MACH_ADM5120_UNKNOWN)
- t = myloader_detect_board();
-
- /* Try to detect bootloader type */
- if (cfe_present()) {
- adm5120_boot_loader = BOOT_LOADER_CFE;
- if (t == MACH_ADM5120_UNKNOWN)
- t = cfe_detect_board();
- } else if (uboot_present()) {
- adm5120_boot_loader = BOOT_LOADER_UBOOT;
- if (t == MACH_ADM5120_UNKNOWN)
- t = uboot_detect_board();
- } else {
- if (t == MACH_ADM5120_UNKNOWN)
- t = prom_detect_board();
- }
-
- for (board = adm5120_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
- board++) {
- if (board->mach_type == t)
- break;
- }
-
- memcpy(&adm5120_board, board, sizeof(adm5120_board));
-}
#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
-static void __init adm5120_detect_cpuinfo(void)
-{
- u32 code;
- u32 clks;
-
- code = SWITCH_READ(SWITCH_REG_CODE);
-
- adm5120_product_code = CODE_GET_PC(code);
- adm5120_revision = CODE_GET_REV(code);
- adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
- ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
- adm5120_nand_boot = CODE_GET_NAB(code);
-
- clks = CODE_GET_CLKS(code);
- adm5120_speed = ADM5120_SPEED_175;
- if (clks & 1)
- adm5120_speed += 25000000;
- if (clks & 2)
- adm5120_speed += 50000000;
-}
-
-static void adm5120_ndelay(u32 ns)
+void adm5120_ndelay(u32 ns)
{
u32 t;
SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
}
-#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
-#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
-
-extern void prom_printf(char *, ...);
-#if 1
-# define mem_dbg(f, a...) prom_printf("mem_detect: " f, ## a)
-#else
-# define mem_dbg(f, a...)
-#endif
-
-#define MEM_WR_DELAY 10000 /* 0.01 usec */
-
-static int mem_check_pattern(u8 *addr, unsigned long offs)
-{
- volatile u32 *p1 = (volatile u32 *)addr;
- volatile u32 *p2 = (volatile u32 *)(addr+offs);
- u32 t,u,v;
-
- /* save original value */
- t = *p1;
- u = *p2;
-
- if (t != u)
- return 0;
-
- v = 0x55555555;
- if (u == v)
- v = 0xAAAAAAAA;
-
- mem_dbg("write 0x%08lX to 0x%08lX\n", v, (unsigned long)p1);
-
- *p1 = v;
- mem_dbg("delay %d ns\n", MEM_WR_DELAY);
- adm5120_ndelay(MEM_WR_DELAY);
- u = *p2;
-
- mem_dbg("pattern at 0x%08lX is 0x%08lX\n", (unsigned long)p2, u);
-
- /* restore original value */
- *p1 = t;
-
- return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
+void __init adm5120_soc_init(void)
{
- u32 memctrl;
- u32 size, maxsize;
- u8 *p;
-
- memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
- switch (memctrl & MEMCTRL_SDRS_MASK) {
- case MEMCTRL_SDRS_4M:
- maxsize = 4 << 20;
- break;
- case MEMCTRL_SDRS_8M:
- maxsize = 8 << 20;
- break;
- case MEMCTRL_SDRS_16M:
- maxsize = 16 << 20;
- break;
- default:
- maxsize = 64 << 20;
- break;
- }
-
- /* disable buffers for both SDRAM banks */
- mem_dbg("disable buffers for both banks\n");
- MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
- MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
-
- mem_dbg("checking for %ldMB chip in 1st bank\n", maxsize >> 20);
-
- /* detect size of the 1st SDRAM bank */
- p = (u8 *)KSEG1ADDR(0);
- for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
- if (mem_check_pattern(p, size)) {
- /* mirrored address */
- mem_dbg("mirrored data found at offset 0x%lX\n", size);
- break;
- }
- }
-
- mem_dbg("chip size in 1st bank is %ldMB\n", size >> 20);
- adm5120_memsize = size;
-
- if (size != maxsize)
- /* 2nd bank is not supported */
- goto out;
-
- if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
- /* 2nd bank is disabled */
- goto out;
-
- /*
- * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
- * are missing.
- */
- mem_dbg("check presence of 2nd bank\n");
-
- p = (u8 *)KSEG1ADDR(maxsize+size-4);
- if (mem_check_pattern(p, 0)) {
- adm5120_memsize += size;
- }
-
- if (maxsize != size) {
- /* adjusting MECTRL register */
- memctrl &= ~(MEMCTRL_SDRS_MASK);
- switch (size>>20) {
- case 4:
- memctrl |= MEMCTRL_SDRS_4M;
- break;
- case 8:
- memctrl |= MEMCTRL_SDRS_8M;
- break;
- case 16:
- memctrl |= MEMCTRL_SDRS_16M;
- break;
- default:
- memctrl |= MEMCTRL_SDRS_64M;
- break;
- }
- SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
- }
-
-out:
- /* reenable buffer for both SDRAM banks */
- mem_dbg("enable buffers for both banks\n");
- MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
- MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
-
- mem_dbg("%dx%ldMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
- size >>20);
-
- size = adm5120_board_memsize();
- if (size > 0 && size != adm5120_memsize) {
- mem_dbg("wrong memory size detected, board settings will be used\n");
- adm5120_memsize = size;
- }
-}
+ u32 code;
+ u32 clks;
-void __init adm5120_info_show(void)
-{
- /* FIXME: move this somewhere else */
- printk(KERN_INFO "ADM%04X%s revision %d, running at %ldMHz\n",
- adm5120_product_code,
- (adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P",
- adm5120_revision, (adm5120_speed / 1000000)
- );
- printk(KERN_INFO "Boot loader is: %s\n", boot_loader_names[adm5120_boot_loader]);
- printk(KERN_INFO "Booted from : %s flash\n", adm5120_nand_boot ? "NAND":"NOR");
- printk(KERN_INFO "Board is : %s\n", adm5120_board_name());
- printk(KERN_INFO "Memory size : %ldMB\n", adm5120_memsize >> 20);
-}
+ code = SWITCH_READ(SWITCH_REG_CODE);
-void __init adm5120_info_init(void)
-{
- adm5120_detect_cpuinfo();
- adm5120_detect_board();
- adm5120_detect_memsize();
+ adm5120_product_code = CODE_GET_PC(code);
+ adm5120_revision = CODE_GET_REV(code);
+ adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+ ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
+ adm5120_nand_boot = CODE_GET_NAB(code);
- adm5120_info_show();
+ clks = CODE_GET_CLKS(code);
+ adm5120_speed = ADM5120_SPEED_175;
+ if (clks & 1)
+ adm5120_speed += 25000000;
+ if (clks & 2)
+ adm5120_speed += 50000000;
}
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 generic board code
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static LIST_HEAD(adm5120_boards);
+static char adm5120_board_name[ADM5120_BOARD_NAMELEN];
+
+const char *get_system_type(void)
+{
+ return adm5120_board_name;
+}
+
+static struct adm5120_board * __init adm5120_board_find(unsigned long machtype)
+{
+ struct list_head *this;
+ struct adm5120_board *board;
+ void *ret;
+
+ ret = NULL;
+ list_for_each(this, &adm5120_boards) {
+ board = list_entry(this, struct adm5120_board, list);
+ if (board->mach_type == machtype) {
+ ret = board;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int __init adm5120_board_setup(void)
+{
+ struct adm5120_board *board;
+ int err;
+
+ board = adm5120_board_find(mips_machtype);
+ if (board == NULL) {
+ printk(KERN_ALERT "adm5120: no board registered for machtype %lu"
+ ", trying generic\n", mips_machtype);
+ board = adm5120_board_find(MACH_ADM5120_GENERIC);
+ if (board == NULL)
+ panic("adm5120: unsupported board\n");
+ }
+
+ printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name);
+
+ memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
+
+ adm5120_board_reset = board->board_reset;
+ if (board->num_eth_ports > 0)
+ adm5120_eth_num_ports = board->num_eth_ports;
+
+ if (board->board_setup)
+ board->board_setup();
+
+ /* register PCI controller */
+ if (adm5120_package_bga())
+ platform_device_register(&adm5120_pci_device);
+
+ /* register board devices */
+ if (board->num_devices > 0 && board->devices != NULL ) {
+ err = platform_add_devices(board->devices, board->num_devices);
+ if (err)
+ printk(KERN_ALERT "adm5120: adding board devices failed\n");
+ }
+
+ return 0;
+}
+
+void __init adm5120_board_register(struct adm5120_board *board)
+{
+ list_add(&board->list, &adm5120_boards);
+ printk(KERN_INFO "adm5120: registered board '%s'\n", board->name);
+}
+
+void __init adm5120_register_boards(struct adm5120_board **boards,
+ int num)
+{
+ int i;
+
+ for (i=0; i<num; i++)
+ adm5120_board_register(boards[i]);
+}
+
+arch_initcall(adm5120_board_setup);
--- /dev/null
+#
+# Makefile for platforms based on ADM5120 SoC
+#
+
+obj-y += generic.o
+obj-y += cellvision.o
+obj-y += compex.o
+obj-y += edimax.o
+obj-y += infineon.o
+obj-y += mikrotik.o
+obj-y += zyxel.o
--- /dev/null
+/*
+ * $Id$
+ *
+ * Cellvision/SparkLAN boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+static struct mtd_partition cas6xx_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "nvfs1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "nvfs2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "nvfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 128*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device *cas6xx_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static struct platform_device *cas7xx_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static void __init cas6xx_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+ adm5120_flash0_data.parts = cas6xx_partitions;
+
+ /* TODO: setup mac address */
+}
+
+static void __init cas7xx_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+ adm5120_flash0_data.parts = cas7xx_partitions;
+
+ /* TODO: setup mac address */
+}
+
+static struct adm5120_board cas630_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS630,
+ .name = "Cellvision CAS-630/630W",
+ .board_setup = cas6xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas6xx_devices),
+ .devices = cas6xx_devices,
+};
+
+static struct adm5120_board cas670_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS670,
+ .name = "Cellvision CAS-670/670W",
+ .board_setup = cas6xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas6xx_devices),
+ .devices = cas6xx_devices,
+};
+
+static struct adm5120_board cas700_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS700,
+ .name = "Cellvision CAS-700/700W",
+ .board_setup = cas7xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas7xx_devices),
+ .devices = cas7xx_devices,
+};
+
+static struct adm5120_board cas771_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS771,
+ .name = "Cellvision CAS-771/771W",
+ .board_setup = cas7xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas7xx_devices),
+ .devices = cas7xx_devices,
+};
+
+static struct adm5120_board cas790_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS790,
+ .name = "Cellvision CAS-790",
+ .board_setup = cas7xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas7xx_devices),
+ .devices = cas7xx_devices,
+};
+
+static struct adm5120_board cas861_board __initdata = {
+ .mach_type = MACH_ADM5120_CAS861,
+ .name = "Cellvision CAS-861/861W",
+ .board_setup = cas7xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(cas7xx_devices),
+ .devices = cas7xx_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&cas630_board);
+ adm5120_board_register(&cas670_board);
+ adm5120_board_register(&cas700_board);
+ adm5120_board_register(&cas771_board);
+ adm5120_board_register(&cas790_board);
+ adm5120_board_register(&cas861_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Compex boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+static void wp54_reset(void)
+{
+ gpio_direction_output(ADM5120_GPIO_PIN3, 0);
+}
+
+static struct mtd_partition wp54g_wrt_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "trx",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x3A0000,
+ } , {
+ .name = "nvram",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x010000,
+ }
+};
+
+static struct platform_device *np2xg_devices[] __initdata = {
+ &adm5120_flash0_device,
+ &adm5120_usbc_device,
+};
+
+static struct platform_device *wp54_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static void __init np2xg_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+ /* TODO: setup mac address */
+}
+
+static void __init wp54_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+ /* TODO: setup mac address */
+}
+
+static void __init wp54_wrt_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
+ adm5120_flash0_data.parts = wp54g_wrt_partitions;
+
+ /* TODO: setup mac address */
+}
+
+static struct adm5120_board np27g_board __initdata = {
+ .mach_type = MACH_ADM5120_NP27G,
+ .name = "Compex NetPassage 27G",
+ .board_setup = np2xg_setup,
+ .num_eth_ports = 4,
+ .num_devices = ARRAY_SIZE(np2xg_devices),
+ .devices = np2xg_devices,
+};
+
+static struct adm5120_board np28g_board __initdata = {
+ .mach_type = MACH_ADM5120_NP28G,
+ .name = "Compex NetPassage 28G",
+ .board_setup = np2xg_setup,
+ .num_eth_ports = 3,
+ .num_devices = ARRAY_SIZE(np2xg_devices),
+ .devices = np2xg_devices,
+};
+
+static struct adm5120_board wp54ag_board __initdata = {
+ .mach_type = MACH_ADM5120_WP54AG,
+ .name = "Compex WP54AG",
+ .board_setup = wp54_setup,
+ .board_reset = wp54_reset,
+ .num_eth_ports = 2,
+ .num_devices = ARRAY_SIZE(wp54_devices),
+ .devices = wp54_devices,
+};
+
+static struct adm5120_board wp54g_board __initdata = {
+ .mach_type = MACH_ADM5120_WP54G,
+ .name = "Compex WP54G",
+ .board_setup = wp54_setup,
+ .board_reset = wp54_reset,
+ .num_eth_ports = 2,
+ .num_devices = ARRAY_SIZE(wp54_devices),
+ .devices = wp54_devices,
+};
+
+static struct adm5120_board wp54g_wrt_board __initdata = {
+ .mach_type = MACH_ADM5120_WP54G,
+ .name = "Compex WP54G-WRT",
+ .board_setup = wp54_wrt_setup,
+ .board_reset = wp54_reset,
+ .num_eth_ports = 2,
+ .num_devices = ARRAY_SIZE(wp54_devices),
+ .devices = wp54_devices,
+};
+
+static struct adm5120_board wpp54ag_board __initdata = {
+ .mach_type = MACH_ADM5120_WPP54AG,
+ .name = "Compex WPP54AG",
+ .board_setup = wp54_setup,
+ .board_reset = wp54_reset,
+ .num_eth_ports = 2,
+ .num_devices = ARRAY_SIZE(wp54_devices),
+ .devices = wp54_devices,
+};
+
+static struct adm5120_board wpp54g_board __initdata = {
+ .mach_type = MACH_ADM5120_WPP54G,
+ .name = "Compex WPP54G",
+ .board_setup = wp54_setup,
+ .board_reset = wp54_reset,
+ .num_eth_ports = 2,
+ .num_devices = ARRAY_SIZE(wp54_devices),
+ .devices = wp54_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&np27g_board);
+ adm5120_board_register(&np28g_board);
+ adm5120_board_register(&wp54ag_board);
+ adm5120_board_register(&wp54g_board);
+ adm5120_board_register(&wp54g_wrt_board);
+ adm5120_board_register(&wpp54ag_board);
+ adm5120_board_register(&wpp54g_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Edimax boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition br6104k_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device *br6104k_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static void __init br6104k_setup(void) {
+ /* setup data for flash0 device */
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
+ adm5120_flash0_data.parts = br6104k_partitions;
+
+ /* TODO: setup mac addresses, if possible */
+}
+
+static struct adm5120_board br6104k_board __initdata = {
+ .mach_type = MACH_ADM5120_BR6104K,
+ .name = "Edimax BR-6104K",
+ .board_setup = br6104k_setup,
+ .num_eth_ports = 5,
+ .num_devices = ARRAY_SIZE(br6104k_devices),
+ .devices = br6104k_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&br6104k_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Generic ADM5120 based board
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct platform_device *generic_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static struct adm5120_board generic_board __initdata = {
+ .mach_type = MACH_ADM5120_GENERIC,
+ .name = "Generic ADM5120 board",
+ .num_eth_ports = 6,
+ .num_devices = ARRAY_SIZE(generic_devices),
+ .devices = generic_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&generic_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Infineon boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio3(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN3, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN3, 1);
+ break;
+ }
+}
+
+static struct mtd_partition easy83000_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "boardcfg",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device *easy83000_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static void __init easy83000_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio3;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy83000_partitions);
+ adm5120_flash0_data.parts = easy83000_partitions;
+
+ /* TODO: setup mac addresses */
+}
+
+static struct adm5120_board easy83000_board __initdata = {
+ .mach_type = MACH_ADM5120_EASY83000,
+ .name = "Infineon EASY-83000",
+ .board_setup = easy83000_setup,
+ .num_eth_ports = 6,
+ .num_devices = ARRAY_SIZE(easy83000_devices),
+ .devices = easy83000_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&easy83000_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Mikrotik RouterBOARDs 111/112/133/133C/153
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition rb1xx_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device *rb1xx_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static void __init rb1xx_setup(void)
+{
+ /* setup data for flash0 device */
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
+ adm5120_flash0_data.parts = rb1xx_partitions;
+
+ /* TODO: setup mac address */
+}
+
+static struct adm5120_board rb111_board __initdata = {
+ .mach_type = MACH_ADM5120_RB_111,
+ .name = "Mikrotik RouterBOARD 111",
+ .board_setup = rb1xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(rb1xx_devices),
+ .devices = rb1xx_devices,
+};
+
+static struct adm5120_board rb112_board __initdata = {
+ .mach_type = MACH_ADM5120_RB_112,
+ .name = "Mikrotik RouterBOARD 112",
+ .board_setup = rb1xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(rb1xx_devices),
+ .devices = rb1xx_devices,
+};
+
+static struct adm5120_board rb133_board __initdata = {
+ .mach_type = MACH_ADM5120_RB_133,
+ .name = "Mikrotik RouterBOARD 133",
+ .board_setup = rb1xx_setup,
+ .num_eth_ports = 3,
+ .num_devices = ARRAY_SIZE(rb1xx_devices),
+ .devices = rb1xx_devices,
+};
+
+static struct adm5120_board rb133c_board __initdata = {
+ .mach_type = MACH_ADM5120_RB_133C,
+ .name = "Mikrotik RouterBOARD 133C",
+ .board_setup = rb1xx_setup,
+ .num_eth_ports = 1,
+ .num_devices = ARRAY_SIZE(rb1xx_devices),
+ .devices = rb1xx_devices,
+};
+
+static struct adm5120_board rb153_board __initdata = {
+ .mach_type = MACH_ADM5120_RB_153,
+ .name = "Mikrotik RouterBOARD 153",
+ .board_setup = rb1xx_setup,
+ .num_eth_ports = 5,
+ .num_devices = ARRAY_SIZE(rb1xx_devices),
+ .devices = rb1xx_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&rb111_board);
+ adm5120_board_register(&rb112_board);
+ adm5120_board_register(&rb133_board);
+ adm5120_board_register(&rb133c_board);
+ adm5120_board_register(&rb153_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
--- /dev/null
+/*
+ * $Id$
+ *
+ * ZyXEL Prestige P-334/P-335 boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+static struct mtd_partition p33x_partitions[] = {
+ {
+ .name = "bootbase",
+ .offset = 0,
+ .size = 16*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "rom",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device *p334_devices[] __initdata = {
+ &adm5120_flash0_device,
+};
+
+static struct platform_device *p335_devices[] __initdata = {
+ &adm5120_flash0_device,
+ &adm5120_usbc_device,
+};
+
+static void __init p33x_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+ /* setup data for flash0 device */
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
+ adm5120_flash0_data.parts = p33x_partitions;
+
+ /* TODO: setup mac address */
+}
+
+static struct adm5120_board p334wt_board __initdata = {
+ .mach_type = MACH_ADM5120_P334WT,
+ .name = "ZyXEL Prestige 334WT",
+ .board_setup = p33x_setup,
+ .num_devices = ARRAY_SIZE(p334_devices),
+ .devices = p334_devices,
+};
+
+static struct adm5120_board p335_board __initdata = {
+ .mach_type = MACH_ADM5120_P335,
+ .name = "ZyXEL Prestige 335/335WT",
+ .board_setup = p33x_setup,
+ .num_devices = ARRAY_SIZE(p335_devices),
+ .devices = p335_devices,
+};
+
+static int __init register_boards(void)
+{
+ adm5120_board_register(&p334wt_board);
+ adm5120_board_register(&p335_board);
+ return 0;
+}
+
+pure_initcall(register_boards);
return 0;
}
-subsys_initcall(adm5120_gpio_init);
+pure_initcall(adm5120_gpio_init);
EXPORT_SYMBOL(adm5120_gpio_direction_output);
EXPORT_SYMBOL(adm5120_gpio_direction_input);
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- * daniell@admtek.com.tw
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+/*
+ * $Id$
*
- * ########################################################################
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
*
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
*
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
*
- * ########################################################################
- *
- *****************************************************************************/
+ */
-#include <linux/autoconf.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
+#include <asm/addrspace.h>
#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm-mips/mips-boards/prom.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#if 1
+# define mem_dbg(f, a...) printk("mem_detect: " f, ## a)
+#else
+# define mem_dbg(f, a...)
+#endif
-#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+#define MEM_WR_DELAY 10000 /* 0.01 usec */
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+unsigned long adm5120_memsize;
-struct prom_pmemblock * __init prom_getmdesc(void)
+static int __init mem_check_pattern(u8 *addr, unsigned long offs)
{
- unsigned int memsize;
- char cmdline[CL_SIZE], *ptr;
-
- memsize = adm5120_memsize;
- /* Check the command line for a memsize directive that overrides
- * the physical/default amount */
- strcpy(cmdline, arcs_cmdline);
- ptr = strstr(cmdline, "memsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " memsize=");
-
- if (ptr)
- memsize = memparse(ptr + 8, &ptr);
-
- memset(mdesc, 0, sizeof(mdesc));
- mdesc[0].type = BOOT_MEM_RAM;
- mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
- mdesc[0].size = memsize - mdesc[0].base;
-
- return &mdesc[0];
+ volatile u32 *p1 = (volatile u32 *)addr;
+ volatile u32 *p2 = (volatile u32 *)(addr+offs);
+ u32 t,u,v;
+
+ /* save original value */
+ t = *p1;
+ u = *p2;
+
+ if (t != u)
+ return 0;
+
+ v = 0x55555555;
+ if (u == v)
+ v = 0xAAAAAAAA;
+
+ mem_dbg("write 0x%08lX to 0x%08lX\n", v, (unsigned long)p1);
+
+ *p1 = v;
+ mem_dbg("delay %d ns\n", MEM_WR_DELAY);
+ adm5120_ndelay(MEM_WR_DELAY);
+ u = *p2;
+
+ mem_dbg("pattern at 0x%08lX is 0x%08lX\n", (unsigned long)p2, u);
+
+ /* restore original value */
+ *p1 = t;
+
+ return (v == u);
}
-void __init prom_meminit(void)
+static void __init adm5120_detect_memsize(void)
{
- struct prom_pmemblock *p;
-
- p = prom_getmdesc();
-
- while (p->size)
- {
- long type;
- unsigned long base, size;
- base = p->base;
- type = p->type,
- size = p->size;
- add_memory_region(base, size, type);
- p++;
+ u32 memctrl;
+ u32 size, maxsize;
+ u8 *p;
+
+ memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
+ switch (memctrl & MEMCTRL_SDRS_MASK) {
+ case MEMCTRL_SDRS_4M:
+ maxsize = 4 << 20;
+ break;
+ case MEMCTRL_SDRS_8M:
+ maxsize = 8 << 20;
+ break;
+ case MEMCTRL_SDRS_16M:
+ maxsize = 16 << 20;
+ break;
+ default:
+ maxsize = 64 << 20;
+ break;
}
+
+ /* disable buffers for both SDRAM banks */
+ mem_dbg("disable buffers for both banks\n");
+ MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
+ MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
+
+ mem_dbg("checking for %ldMB chip in 1st bank\n", maxsize >> 20);
+
+ /* detect size of the 1st SDRAM bank */
+ p = (u8 *)KSEG1ADDR(0);
+ for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
+ if (mem_check_pattern(p, size)) {
+ /* mirrored address */
+ mem_dbg("mirrored data found at offset 0x%lX\n", size);
+ break;
+ }
+ }
+
+ mem_dbg("chip size in 1st bank is %ldMB\n", size >> 20);
+ adm5120_memsize = size;
+
+ if (size != maxsize)
+ /* 2nd bank is not supported */
+ goto out;
+
+ if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
+ /* 2nd bank is disabled */
+ goto out;
+
+ /*
+ * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
+ * are missing.
+ */
+ mem_dbg("check presence of 2nd bank\n");
+
+ p = (u8 *)KSEG1ADDR(maxsize+size-4);
+ if (mem_check_pattern(p, 0)) {
+ adm5120_memsize += size;
+ }
+
+ if (maxsize != size) {
+ /* adjusting MECTRL register */
+ memctrl &= ~(MEMCTRL_SDRS_MASK);
+ switch (size>>20) {
+ case 4:
+ memctrl |= MEMCTRL_SDRS_4M;
+ break;
+ case 8:
+ memctrl |= MEMCTRL_SDRS_8M;
+ break;
+ case 16:
+ memctrl |= MEMCTRL_SDRS_16M;
+ break;
+ default:
+ memctrl |= MEMCTRL_SDRS_64M;
+ break;
+ }
+ SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
+ }
+
+out:
+ /* reenable buffer for both SDRAM banks */
+ mem_dbg("enable buffers for both banks\n");
+ MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
+ MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
+
+ mem_dbg("%dx%ldMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
+ size >>20);
}
-void __init prom_free_prom_memory(void)
+void __init adm5120_mem_init(void)
{
- /* We do not have to prom memory to free */
+ adm5120_detect_memsize();
+ add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
}
--- /dev/null
+/*
+ * $Id$
+ *
+ * Generic ADM5120 platform devices
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#if 1
+/*
+ * TODO:remove global adm5120_eth* variables when the switch driver will be
+ * converted into a real platform driver
+ */
+unsigned int adm5120_eth_num_ports = 6;
+unsigned char adm5120_eth_macs[6][6] = {
+ {'\00', 'A', 'D', 'M', '\x51', '\x20' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x21' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x22' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x23' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x24' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x25' }
+};
+
+EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
+EXPORT_SYMBOL_GPL(adm5120_eth_macs);
+#else
+/* Built-in ethernet switch */
+struct adm5120_switch_platform_data adm5120_switch_data;
+struct platform_device adm5120_switch_device = {
+ .name = "adm5120-switch",
+ .id = -1,
+ .dev.platform_data = &adm5120_switch_data,
+};
+#endif
+
+/* PCI Host Controller */
+struct adm5120_pci_platform_data adm5120_pci_data;
+struct platform_device adm5120_pci_device = {
+ .name = "adm5120-pci",
+ .id = -1,
+ .dev.platform_data = &adm5120_pci_data,
+};
+
+/* USB Host Controller */
+struct resource adm5120_usbc_resources[] = {
+ [0] = {
+ .start = ADM5120_USBC_BASE,
+ .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ADM5120_IRQ_USBC,
+ .end = ADM5120_IRQ_USBC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device adm5120_usbc_device = {
+ .name = "adm5120-usbc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adm5120_usbc_resources),
+ .resource = adm5120_usbc_resources,
+};
+
+/* NOR flash 0 */
+struct adm5120_flash_platform_data adm5120_flash0_data;
+struct platform_device adm5120_flash0_device = {
+ .name = "adm5120-flash",
+ .id = 0,
+ .dev.platform_data = &adm5120_flash0_data,
+};
+
+/* NOR flash 1 */
+struct adm5120_flash_platform_data adm5120_flash1_data;
+struct platform_device adm5120_flash1_device = {
+ .name = "adm5120-flash",
+ .id = 1,
+ .dev.platform_data = &adm5120_flash1_data,
+};
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- * daniell@admtek.com.tw
- * Copyright (C) 2007 OpenWrt.org
+/*
+ * $Id$
+ *
+ * ADM5120 specific prom routines
*
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
*
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- *****************************************************************************/
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
#include <linux/init.h>
-#include <linux/autoconf.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_uart.h>
-static char **prom_envp = NULL;
+#include <prom/cfe.h>
+#include <prom/generic.h>
+#include <prom/routerboot.h>
+#include <prom/myloader.h>
+#include <prom/zynos.h>
-void setup_prom_printf(int);
-void prom_printf(char *, ...);
-void prom_meminit(void);
+unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
+struct board_desc {
+ unsigned long mach_type;
+ char *name;
+};
-#define READCSR(r) *(volatile unsigned long *)(0xB2600000+(r))
-#define WRITECSR(r,v) *(volatile unsigned long *)(0xB2600000+(r)) = v
+#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
+static struct board_desc common_boards[] __initdata = {
+ /* Cellvision/SparkLAN boards */
+ DEFBOARD("CAS-630", MACH_ADM5120_CAS630),
+ DEFBOARD("CAS-670", MACH_ADM5120_CAS670),
+ DEFBOARD("CAS-771", MACH_ADM5120_CAS771),
+ DEFBOARD("CAS-790", MACH_ADM5120_CAS790),
+ DEFBOARD("CAS-861", MACH_ADM5120_CAS861),
+ /* Compex boards */
+ DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT),
+ /* Edimax boards */
+ DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K),
+ DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104K),
+ /* Infineon boards */
+ DEFBOARD("EASY 5120", MACH_ADM5120_EASY5120),
+ DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT),
+ DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA),
+ DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000),
+ /* Mikrotik RouterBOARDs */
+ DEFBOARD("111", MACH_ADM5120_RB_111),
+ DEFBOARD("112", MACH_ADM5120_RB_112),
+ DEFBOARD("133", MACH_ADM5120_RB_133),
+ DEFBOARD("133C", MACH_ADM5120_RB_133C),
+ DEFBOARD("miniROUTER", MACH_ADM5120_RB_150),
+ DEFBOARD("153", MACH_ADM5120_RB_153),
+};
-#define UART_DR_REG 0x00
-#define UART_FR_REG 0x18
-#define UART_TX_FIFO_FULL 0x20
+static unsigned long __init find_machtype_byname(char *name)
+{
+ unsigned long ret;
+ int i;
+
+ ret = MACH_ADM5120_GENERIC;
+ if (name == NULL)
+ goto out;
-int putPromChar(char c)
+ if (*name == '\0')
+ goto out;
+
+ for (i=0; i<ARRAY_SIZE(common_boards); i++) {
+ if (strcmp(common_boards[i].name, name) == 0) {
+ ret = common_boards[i].mach_type;
+ break;
+ }
+ }
+
+out:
+ return ret;
+}
+
+static unsigned long __init detect_machtype_routerboot(void)
{
- WRITECSR(UART_DR_REG, c);
- while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
- return 0;
+ char *name;
+
+ name = routerboot_get_boardname();
+ return find_machtype_byname(name);
}
-/*
- * Ugly prom_printf used for debugging
- */
+static unsigned long __init detect_machtype_generic(void)
+{
+ char *name;
+
+ name = generic_prom_getenv("board");
+ return find_machtype_byname(name);
+}
-void prom_printf(char *fmt, ...)
+unsigned long __init detect_machtype_cfe(void)
{
- va_list args;
- int l;
- char *p, *buf_end;
- char buf[1024];
-
- va_start(args, fmt);
- l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
- va_end(args);
-
- buf_end = buf + l;
-
- for (p = buf; p < buf_end; p++) {
- /* Crude cr/nl handling is better than none */
- if (*p == '\n')
- putPromChar('\r');
- putPromChar(*p);
- }
+ char *name;
+
+ name = cfe_getenv("BOARD_NAME");
+ return find_machtype_byname(name);
}
-char *prom_getenv(char *envname)
+static struct {
+ unsigned long mach_type;
+ u16 vendor_id;
+ u16 board_id;
+} zynos_boards[] __initdata = {
+#define ZYNOS_BOARD(vi, bi, mt) { .vendor_id = (vi), .board_id = (bi), \
+ .mach_type = (mt) }
+
+#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
+#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
+#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
+ ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334, MACH_ADM5120_P334),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U)
+};
+
+static unsigned long __init detect_machtype_bootbase(void)
{
- char **env;
- char *ret;
+ unsigned long ret;
+ int i;
+
+ ret = MACH_ADM5120_GENERIC;
+ for (i=0; i<ARRAY_SIZE(zynos_boards); i++) {
+ if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
+ zynos_boards[i].board_id == bootbase_info.board_id) {
+ ret = zynos_boards[i].mach_type;
+ break;
+ }
+ }
+
+ return ret;
+}
- ret = NULL;
+static struct {
+ unsigned long mach_type;
+ u16 vid;
+ u16 did;
+ u16 svid;
+ u16 sdid;
+} mylo_boards[] __initdata = {
+#define MYLO_BOARD(v,d,sv,sd,mt) { .vid = (v), .did = (d), .svid = (sv), \
+ .sdid = (sd), .mach_type = (mt) }
+#define COMPEX_BOARD(d,mt) MYLO_BOARD(VENID_COMPEX,(d),VENID_COMPEX,(d),(mt))
- if (prom_envp== NULL)
- return NULL;
+ COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
+ COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
+ COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
+ COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
+ COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
+ COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
+ COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
+ COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
+};
- for (env = prom_envp; *env != NULL; env++) {
- if (strcmp(envname, *env++) == 0) {
- ret = *env;
+static unsigned long __init detect_machtype_myloader(void)
+{
+ unsigned long ret;
+ int i;
+
+ ret = MACH_ADM5120_GENERIC;
+ for (i=0; i<ARRAY_SIZE(mylo_boards); i++) {
+ if (mylo_boards[i].vid == myloader_info.vid &&
+ mylo_boards[i].did == myloader_info.did &&
+ mylo_boards[i].svid == myloader_info.svid &&
+ mylo_boards[i].sdid == myloader_info.sdid) {
+ ret = mylo_boards[i].mach_type;
break;
}
}
return ret;
}
-extern char _image_cmdline;
-/*
- * initialize the prom module.
- */
-void __init prom_init(void)
+static void __init prom_detect_machtype(void)
{
- char *cmd;
+ if (bootbase_present()) {
+ adm5120_prom_type = ADM5120_PROM_BOOTBASE;
+ mips_machtype = detect_machtype_bootbase();
+ return;
+ }
- if ((fw_arg2 & 3) == 0) {
- prom_envp = (char **)fw_arg2;
+ if (cfe_present()) {
+ adm5120_prom_type = ADM5120_PROM_CFE;
+ mips_machtype = detect_machtype_cfe();
+ return;
}
- adm5120_info_init();
+ if (myloader_present()) {
+ adm5120_prom_type = ADM5120_PROM_MYLOADER;
+ mips_machtype = detect_machtype_myloader();
+ return;
+ }
- /* you should these macros defined in include/asm/bootinfo.h */
- mips_machgroup = MACH_GROUP_ADM5120;
- mips_machtype = adm5120_board.mach_type;
+ if (routerboot_present()) {
+ adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
+ mips_machtype = detect_machtype_routerboot();
+ return;
+ }
+
+ adm5120_prom_type = ADM5120_PROM_GENERIC;
+ mips_machtype = detect_machtype_generic();
+}
+
+/* TODO: this is an ugly hack for RouterBOARDS */
+extern char _image_cmdline;
+static void __init prom_init_cmdline(void)
+{
+ char *cmd;
/* init command line, register a default kernel command line */
cmd = &_image_cmdline + 8;
if( strlen(cmd) > 0) strcpy( &(arcs_cmdline[0]), cmd);
else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE);
- /* init memory map */
- prom_meminit();
+}
+
+#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))
+#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v)
+
+void __init prom_putchar(char ch)
+{
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+ UART_WRITE(UART_REG_DATA, ch);
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void __init prom_init(void)
+{
+ mips_machgroup = MACH_GROUP_ADM5120;
+ prom_detect_machtype();
+
+ prom_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* We do not have to prom memory to free */
}
--- /dev/null
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+lib-y += bootbase.o
+lib-y += cfe.o
+lib-y += generic.o
+lib-y += myloader.o
+lib-y += routerboot.o
--- /dev/null
+/*
+ * $Id$
+ *
+ * ZyXEL's Bootbase specific prom routines
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/zynos.h>
+#include "prom_read.h"
+
+#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
+#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
+#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
+#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
+
+static int bootbase_found = 0;
+static struct zynos_board_info *board_info;
+
+struct bootbase_info bootbase_info;
+
+static inline int bootbase_dbgarea_present(u8 *data)
+{
+ u32 t;
+
+ t = prom_read_be32(data+5);
+ if (t != ZYNOS_MAGIC_DBGAREA1)
+ return 0;
+
+ t = prom_read_be32(data+9);
+ if (t != ZYNOS_MAGIC_DBGAREA2)
+ return 0;
+
+ return 1;
+}
+
+static inline u32 bootbase_get_bootext_addr(void)
+{
+ return prom_read_be32(&board_info->bootext_addr);
+}
+
+static inline u16 bootbase_get_vendor_id(void)
+{
+#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0)
+ unsigned char vendor[ZYNOS_NAME_LEN];
+ int i;
+
+ for (i=0; i<ZYNOS_NAME_LEN; i++)
+ vendor[i]=board_info->vendor[i];
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
+ return ZYNOS_VENDOR_ID_ZYXEL;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
+ return ZYNOS_VENDOR_ID_DLINK;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
+ return ZYNOS_VENDOR_ID_LUCENT;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
+ return ZYNOS_VENDOR_ID_NETGEAR;
+
+ return ZYNOS_VENDOR_ID_OTHER;
+}
+
+static inline u16 bootbase_get_board_id(void)
+{
+ return prom_read_be16(&board_info->board_id);
+}
+
+int __init bootbase_present(void)
+{
+ u32 t;
+
+ if (bootbase_found)
+ goto out;
+
+ /* check presence of the dbgarea */
+ if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
+ goto out;
+
+ board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
+
+ /* check for a valid BootExt address */
+ t = bootbase_get_bootext_addr();
+ if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
+ goto out;
+
+ bootbase_info.vendor_id = bootbase_get_vendor_id();
+ bootbase_info.board_id = bootbase_get_board_id();
+
+ bootbase_found = 1;
+
+out:
+ return bootbase_found;
+}
+
--- /dev/null
+/*
+ * $Id$
+ *
+ * Broadcom's CFE specific prom routines
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <prom/cfe.h>
+#include "prom_read.h"
+
+/*
+ * CFE based boards
+ */
+#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE
+from other bootloaders */
+
+static int cfe_found = 0;
+
+static u32 cfe_handle;
+static u32 cfe_entry;
+static u32 cfe_seal;
+
+int __init cfe_present(void)
+{
+ /*
+ * This method only works, when we are booted directly from the CFE.
+ */
+ u32 a1 = (u32) fw_arg1;
+
+ if (cfe_found)
+ return 1;
+
+ cfe_handle = (u32) fw_arg0;
+ cfe_entry = (u32) fw_arg2;
+ cfe_seal = (u32) fw_arg3;
+
+ /* Check for CFE by finding the CFE magic number */
+ if (cfe_seal != CFE_EPTSEAL) {
+ /* We are not booted from CFE */
+ return 0;
+ }
+
+ /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
+ if (a1 != 0) {
+ return 0;
+ }
+
+ /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+ if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+ return 0;
+ }
+
+ cfe_found = 1;
+ return 1;
+}
+
+char *cfe_getenv(char *envname)
+{
+ if (cfe_found == 0)
+ return NULL;
+
+ return NULL;
+}
--- /dev/null
+/*
+ * $Id$
+ *
+ * Generic PROM routines
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include <prom/generic.h>
+
+static int *_prom_argc;
+static char **_prom_argv;
+static char **_prom_envp;
+
+char *generic_prom_getenv(char *envname)
+{
+ char **env;
+ char *ret;
+
+ ret = NULL;
+ for (env = _prom_envp; *env != NULL; env++) {
+ if (strcmp(envname, *env++) == 0) {
+ ret = *env;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int generic_prom_present(void)
+{
+ _prom_argc = (int *)fw_arg0;
+ _prom_argv = (char **)fw_arg1;
+ _prom_envp = (char **)fw_arg2;
+
+ return 1;
+}
--- /dev/null
+/*
+ * $Id$
+ *
+ * Compex's MyLoader specific prom routines
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/myloader.h>
+#include "prom_read.h"
+
+#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
+#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
+#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
+
+static int myloader_found = 0;
+
+struct myloader_info myloader_info;
+
+int __init myloader_present(void)
+{
+ struct mylo_system_params *sysp;
+ struct mylo_board_params *boardp;
+ struct mylo_partition_table *parts;
+
+ if (myloader_found)
+ goto out;
+
+ sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
+ boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
+ parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
+
+ /* Check for some magic numbers */
+ if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
+ (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
+ (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
+ goto out;
+
+ myloader_info.vid = le32_to_cpu(sysp->vid);
+ myloader_info.did = le32_to_cpu(sysp->did);
+ myloader_info.svid = le32_to_cpu(sysp->svid);
+ myloader_info.sdid = le32_to_cpu(sysp->sdid);
+
+ myloader_found = 1;
+
+out:
+ return myloader_found;
+}
--- /dev/null
+/*
+ * $Id$
+ *
+ * Generic prom definitions
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PROM_H_
+#define _ADM5120_PROM_H_
+
+/*
+ * Helper routines
+ */
+static inline u16 prom_read_le16(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u16)p[0] + ((u16)p[1] << 8));
+}
+
+static inline u32 prom_read_le32(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
+ ((u32)p[3] << 24));
+}
+
+static inline u16 prom_read_be16(void *buf)
+{
+ u8 *p = buf;
+
+ return (((u16)p[0] << 8) + (u16)p[1]);
+}
+
+static inline u32 prom_read_be32(void *buf)
+{
+ u8 *p = buf;
+
+ return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
+ ((u32)p[3]));
+}
+
+#endif /* _ADM5120_PROM_H_ */
+
+
--- /dev/null
+/*
+ * $Id$
+ *
+ * Mikrotik's RouterBOOT specific prom routines
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_defs.h>
+#include <prom/routerboot.h>
+#include "prom_read.h"
+
+static struct rb_hard_settings rb_hs;
+static int rb_found = 0;
+
+static int __init routerboot_load_hs(u8 *buf, u16 buflen)
+{
+ u16 id,len;
+ u8 *mac;
+ int i,j;
+
+ memset(&rb_hs, 0, sizeof(rb_hs));
+
+ if (buflen < 4)
+ return -1;
+
+ if (prom_read_le32(buf) != RB_MAGIC_HARD)
+ return -1;
+
+ /* skip magic value */
+ buf += 4;
+ buflen -= 4;
+
+ while (buflen > 2) {
+ id = prom_read_le16(buf);
+ buf += 2;
+ buflen -= 2;
+ if (id == RB_ID_TERMINATOR || buflen < 2)
+ break;
+
+ len = prom_read_le16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (buflen < len)
+ break;
+
+ switch (id) {
+ case RB_ID_BIOS_VERSION:
+ rb_hs.bios_ver = (char *)buf;
+ break;
+ case RB_ID_BOARD_NAME:
+ rb_hs.name = (char *)buf;
+ break;
+ case RB_ID_MEMORY_SIZE:
+ rb_hs.mem_size = prom_read_le32(buf);
+ break;
+ case RB_ID_MAC_ADDRESS_COUNT:
+ rb_hs.mac_count = prom_read_le32(buf);
+ break;
+ case RB_ID_MAC_ADDRESS_PACK:
+ rb_hs.mac_count = len/RB_MAC_SIZE;
+ if (rb_hs.mac_count > RB_MAX_MAC_COUNT)
+ rb_hs.mac_count = RB_MAX_MAC_COUNT;
+ mac = buf;
+ for (i=0; i < rb_hs.mac_count; i++) {
+ for (j=0; j < RB_MAC_SIZE; j++)
+ rb_hs.macs[i][j] = mac[j];
+ mac += RB_MAC_SIZE;
+ }
+ break;
+ }
+
+ buf += len;
+ buflen -= len;
+
+ }
+
+ return 0;
+}
+
+#define RB_BS_OFFS 0x14
+#define RB_OFFS_MAX (128*1024)
+
+int __init routerboot_present(void)
+{
+ struct rb_bios_settings *bs;
+ u8 *base;
+ u32 off,len;
+
+ if (rb_found)
+ goto out;
+
+ base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
+ bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
+
+ off = prom_read_le32(&bs->hs_offs);
+ len = prom_read_le32(&bs->hs_size);
+ if (off > RB_OFFS_MAX)
+ goto out;
+
+ if (routerboot_load_hs(base+off, len) != 0)
+ goto out;
+
+ rb_found = 1;
+
+out:
+ return rb_found;
+}
+
+char *routerboot_get_boardname(void)
+{
+ if (rb_found == 0)
+ return NULL;
+
+ return rb_hs.name;
+}
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 specific reset routines
+ *
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_SOFTRESET 0x12000004
+
+void (*adm5120_board_reset)(void);
+
+void adm5120_restart(char *command)
+{
+ /* TODO: stop switch before reset */
+
+ if (adm5120_board_reset)
+ adm5120_board_reset();
+
+ *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+void adm5120_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1);
+}
+
+void adm5120_power_off(void)
+{
+ adm5120_halt();
+}
/*
- * Copyright (C) ADMtek Incorporated.
- * Creator : daniell@admtek.com.tw
- * Copyright 1999, 2000 MIPS Technologies, Inc.
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- * Copyright (C) 2007 OpenWrt.org
+ * $Id$
+ *
+ * ADM5120 specific setup
+ *
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
*/
-#include <linux/autoconf.h>
#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
+#include <linux/kernel.h>
#include <asm/reboot.h>
#include <asm/io.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-
-extern void adm5120_time_init(void) __init;
-
-#define ADM5120_SOFTRESET 0x12000004
-
-void adm5120_restart(char *command)
-{
- *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
-}
-
-
-void adm5120_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1);
-}
-
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+
+static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
+ [ADM5120_PROM_GENERIC] = "Generic",
+ [ADM5120_PROM_CFE] = "CFE",
+ [ADM5120_PROM_UBOOT] = "U-Boot",
+ [ADM5120_PROM_MYLOADER] = "MyLoader",
+ [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT",
+ [ADM5120_PROM_BOOTBASE] = "Bootbase"
+};
-void adm5120_power_off(void)
+static void __init adm5120_report(void)
{
- adm5120_halt();
+ printk(KERN_INFO "SoC : ADM%04X%s revision %d, running at %ldMHz\n",
+ adm5120_product_code,
+ (adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P",
+ adm5120_revision, (adm5120_speed / 1000000)
+ );
+ printk(KERN_INFO "Bootdev : %s flash\n", adm5120_nand_boot ? "NAND":"NOR");
+ printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]);
}
void __init plat_mem_setup(void)
{
- printk(KERN_INFO "ADM5120 board setup\n");
+ adm5120_soc_init();
+ adm5120_mem_init();
+ adm5120_report();
board_time_init = adm5120_time_init;
set_io_port_base(KSEG1);
}
-
-const char *get_system_type(void)
-{
- return adm5120_board_name();
-}
-
-static struct resource adm5120_hcd_resources[] = {
- [0] = {
- .start = ADM5120_USBC_BASE,
- .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ADM5120_IRQ_USBC,
- .end = ADM5120_IRQ_USBC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device adm5120hcd_device = {
- .name = "adm5120-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
- .resource = adm5120_hcd_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &adm5120hcd_device,
-};
-
-static int __init adm5120_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(adm5120_init);
--- /dev/null
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kmod.h>
+#include <linux/root_dev.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/byteorder/generic.h>
+
+#define PFX "trxsplit: "
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1
+#define TRX_MAX_LEN 0x3A0000
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET 3
+#define TRX_MIN_KERNEL_SIZE 256*1024
+
+struct trx_header {
+ u32 magic; /* "HDR0" */
+ u32 len; /* Length of file including header */
+ u32 crc32; /* 32-bit CRC from flag_version to end of file */
+ u32 flag_version; /* 0:15 flags, 16:31 version */
+ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
+};
+
+#define BLOCK_LEN_MIN 0x10000
+
+static struct mtd_info *trx_mtd_master = NULL;
+static struct mtd_info *trx_mtds[TRX_MAX_OFFSET];
+static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
+static struct trx_header trx_hdr;
+static int trx_nr_parts = 0;
+static int trx_rootfs_part = -1;
+
+static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
+{
+ size_t retlen;
+ int err;
+
+ err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr);
+ if (err)
+ goto err_out;
+
+ if (retlen != sizeof(trx_hdr))
+ goto err_out;
+
+ trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
+ trx_hdr.len = le32_to_cpu(trx_hdr.len);
+ trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
+ trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
+ trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
+ trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
+ trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
+
+ /* sanity checks */
+ if (trx_hdr.magic != TRX_MAGIC)
+ goto err_out;
+
+ if (trx_hdr.len > mtd->size - offset)
+ goto err_out;
+
+ /* TODO: add crc32 checking too? */
+
+ return 1;
+
+err_out:
+ return 0;
+}
+
+static void __init trxsplit_create_partitions(struct mtd_info *mtd,
+ unsigned long offset)
+{
+ struct mtd_partition *part = trx_parts;
+ int i;
+
+ for (i=0;i<TRX_MAX_OFFSET;i++) {
+ part = &trx_parts[i];
+ if (trx_hdr.offsets[i] == 0)
+ continue;
+ part->offset = offset + trx_hdr.offsets[i];
+ part->mtdp = &trx_mtds[trx_nr_parts];
+ trx_nr_parts++;
+ }
+
+ for (i=0; i<trx_nr_parts-1; i++) {
+ trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
+ }
+ trx_parts[i].size = mtd->size - trx_parts[i].offset;
+
+ i=0;
+ part = &trx_parts[i];
+ if (part->size < TRX_MIN_KERNEL_SIZE) {
+ part->name = "trx_loader";
+ i++;
+ }
+
+ part = &trx_parts[i];
+ part->name = "trx_kernel";
+ i++;
+
+ part = &trx_parts[i];
+ part->name = "trx_rootfs";
+ trx_rootfs_part = i;
+}
+
+static void __init trxsplit_add_mtd(struct mtd_info *mtd)
+{
+ unsigned long offset;
+ unsigned long blocklen;
+ int found;
+
+ if (trx_mtd_master)
+ return;
+
+ blocklen = mtd->erasesize;
+ if (blocklen < BLOCK_LEN_MIN)
+ blocklen = BLOCK_LEN_MIN;
+
+ printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
+
+ found = 0;
+ for (offset=0; offset < mtd->size; offset+=blocklen) {
+ found = trxsplit_checktrx(mtd, offset);
+ if (found)
+ break;
+ }
+
+ if (found == 0) {
+ printk(KERN_ALERT PFX "no TRX header found\n");
+ return;
+ }
+
+ printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
+
+ trxsplit_create_partitions(mtd, offset);
+
+ trx_mtd_master = mtd;
+}
+
+static void trxsplit_remove_mtd(struct mtd_info *mtd)
+{
+}
+
+static struct mtd_notifier trxsplit_notifier __initdata = {
+ .add = trxsplit_add_mtd,
+ .remove = trxsplit_remove_mtd,
+};
+
+static void __init trxsplit_find_trx(void)
+{
+ register_mtd_user(&trxsplit_notifier);
+ unregister_mtd_user(&trxsplit_notifier);
+}
+
+static int __init trxsplit_init(void)
+{
+ int err;
+ int i;
+
+ trxsplit_find_trx();
+
+ if (trx_mtd_master == NULL)
+ goto err;
+
+ printk(KERN_INFO PFX "creating TRX partitions in '%s'\n",
+ trx_mtd_master->name);
+
+ err = add_mtd_partitions(trx_mtd_master, trx_parts, trx_nr_parts);
+ if (err) {
+ printk(KERN_ALERT PFX "creating TRX partitions failed\n");
+ goto err;
+ }
+
+ for (i=0; i<trx_nr_parts; i++) {
+ /* TODO: add error checking */
+ add_mtd_device(trx_mtds[i]);
+ }
+
+ if (ROOT_DEV == 0 && trx_rootfs_part >= 0) {
+ printk(KERN_INFO PFX "set '%s' to be root filesystem\n",
+ trx_mtds[trx_rootfs_part]->name);
+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, trx_mtds[trx_rootfs_part]->index);
+ }
+
+ return 0;
+
+err:
+ return -1;
+}
+
+late_initcall(trxsplit_init);
*
*/
-#include <linux/autoconf.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
case MACH_ADM5120_WPP54AG:
case MACH_ADM5120_WPP54G:
default:
- printk(KERN_ALERT "PCI: irq map is unknown for %s, using "
- "defaults.\n", adm5120_board_name());
+ printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n");
break;
}
LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL ),
};
-LED_ARRAY(unknown) {
+LED_ARRAY(generic) {
#if defined(CONFIG_LEDS_ADM5120_DIAG)
LED_STD(ADM5120_GPIO_PIN0, "gpio0", NULL ),
LED_STD(ADM5120_GPIO_PIN1, "gpio1", NULL ),
}
static struct mach_data machines[] __initdata = {
- MACH_DATA(MACH_ADM5120_UNKNOWN, unknown),
+ MACH_DATA(MACH_ADM5120_GENERIC, generic),
MACH_DATA(MACH_ADM5120_P334WT, p334wt),
MACH_DATA(MACH_ADM5120_WP54AG, wp54g),
MACH_DATA(MACH_ADM5120_WP54G, wp54g),
--- /dev/null
+/*
+ * $Id$
+ *
+ * Platform driver for NOR flash devices on ADM5120 based boards
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This file was derived from: drivers/mtd/map/physmap.c
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#define DRV_NAME "adm5120-flash"
+#define DRV_DESC "ADM5120 flash MAP driver"
+#define MAX_PARSED_PARTS 8
+
+#define MAP_DBG(m, f, a...) printk(KERN_DEBUG "%s: " f, (m->name) , ## a)
+#define MAP_ERR(m, f, a...) printk(KERN_ERR "%s: " f, (m->name) , ## a)
+#define MAP_INFO(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a)
+
+struct adm5120_map_info {
+ struct map_info map;
+ void (*switch_bank)(unsigned);
+ unsigned long chip_size;
+};
+
+struct adm5120_flash_info {
+ struct mtd_info *mtd;
+ struct resource *res;
+ struct platform_device *dev;
+ struct adm5120_map_info amap;
+#ifdef CONFIG_MTD_PARTITIONS
+ int nr_parts;
+ struct mtd_partition *parts[MAX_PARSED_PARTS];
+#endif
+};
+
+struct flash_desc {
+ u32 phys;
+ u32 srs_shift;
+ u32 mpmc_reg;
+};
+
+/*
+ * Globals
+ */
+static DEFINE_SPINLOCK(adm5120_flash_spin);
+#define FLASH_LOCK() spin_lock(&adm5120_flash_spin)
+#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin)
+
+static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
+
+static u32 flash_sizes[8] = {
+ 0, 512*1024, 1024*1024, 2*1024*1024,
+ 4*1024*1024, 0, 0, 0
+};
+
+static struct flash_desc flash_descs[2] = {
+ {
+ .phys = ADM5120_SRAM0_BASE,
+ .mpmc_reg = MPMC_REG_SC1,
+ .srs_shift = MEMCTRL_SRS0_SHIFT,
+ }, {
+ .phys = ADM5120_SRAM1_BASE,
+ .mpmc_reg = MPMC_REG_SC0,
+ .srs_shift = MEMCTRL_SRS1_SHIFT,
+ }
+};
+
+static const char *probe_types[] = {
+ "cfi_probe",
+ "jedec_probe",
+ "map_rom",
+ NULL
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *parse_types[] = {
+ "cmdlinepart",
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+ "RedBoot",
+#endif
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+ "MyLoader",
+#endif
+};
+#endif
+
+#define BANK_SIZE (2<<20)
+#define BANK_SIZE_MAX (4<<20)
+#define BANK_OFFS_MASK (BANK_SIZE-1)
+#define BANK_START_MASK (~BANK_OFFS_MASK)
+
+static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
+{
+ return (struct adm5120_map_info *)map;
+}
+
+static void adm5120_flash_switchbank(struct map_info *map,
+ unsigned long ofs)
+{
+ struct adm5120_map_info *amap = map_to_amap(map);
+ unsigned bank;
+
+ if (amap->switch_bank == NULL)
+ return;
+
+ bank = (ofs & BANK_START_MASK) >> 21;
+ if (bank > 1)
+ BUG();
+
+ MAP_DBG(map, "ofs=%lu, switching to bank %u\n", ofs, bank);
+ amap->switch_bank(bank);
+}
+
+static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
+{
+ struct adm5120_map_info *amap = map_to_amap(map);
+ map_word ret;
+
+ MAP_DBG(map, "reading from ofs %lu\n", ofs);
+
+ if (ofs >= amap->chip_size)
+ return map_word_ff(map);
+
+ FLASH_LOCK();
+ adm5120_flash_switchbank(map, ofs);
+ ret = inline_map_read(map, (ofs & BANK_OFFS_MASK));
+ FLASH_UNLOCK();
+
+ return ret;
+}
+
+static void adm5120_flash_write(struct map_info *map, const map_word datum,
+ unsigned long ofs)
+{
+ struct adm5120_map_info *amap = map_to_amap(map);
+
+ MAP_DBG(map,"writing to ofs %lu\n", ofs);
+
+ if (ofs > amap->chip_size)
+ return;
+
+ FLASH_LOCK();
+ adm5120_flash_switchbank(map, ofs);
+ inline_map_write(map, datum, (ofs & BANK_OFFS_MASK));
+ FLASH_UNLOCK();
+}
+
+static void adm5120_flash_copy_from(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ struct adm5120_map_info *amap = map_to_amap(map);
+ char *p;
+ ssize_t t;
+
+ MAP_DBG(map, "copying %lu byte(s) from %lu to %lX\n",
+ (unsigned long)len, from, (unsigned long)to);
+
+ if (from > amap->chip_size)
+ return;
+
+ p = (char *)to;
+ while (len > 0) {
+ if (len > BANK_SIZE - (from & BANK_OFFS_MASK))
+ t = BANK_SIZE - (from & BANK_OFFS_MASK);
+ else
+ t = len;
+
+ MAP_DBG(map, "copying %lu byte(s) from %lu to %lX\n",
+ (unsigned long)t, (from & BANK_OFFS_MASK),
+ (unsigned long)p);
+
+ FLASH_LOCK();
+ adm5120_flash_switchbank(map, from);
+ inline_map_copy_from(map, to, (from & BANK_OFFS_MASK), t);
+ FLASH_UNLOCK();
+ p += t;
+ from += t;
+ len -= t;
+ }
+}
+
+static int adm5120_flash_initres(struct adm5120_flash_info *info)
+{
+ struct map_info *map = &info->amap.map;
+ int err = 0;
+
+ info->res = request_mem_region(map->phys, map->size, map->name);
+ if (info->res == NULL) {
+ MAP_ERR(map, "could not reserve memory region\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ map->virt = ioremap_nocache(map->phys, map->size);
+ if (map->virt == NULL) {
+ MAP_ERR(map, "failed to ioremap flash region\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))=(v)
+
+static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
+ struct platform_device *dev)
+{
+ struct map_info *map = &info->amap.map;
+ struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
+ struct flash_desc *fdesc;
+ u32 t;
+
+ map->name = dev->dev.bus_id;
+
+ if (dev->id > 1) {
+ MAP_ERR(map, "invalid flash id\n");
+ goto err_out;
+ }
+
+ fdesc = &flash_descs[dev->id];
+
+ /* get memory window size */
+ t = SWITCH_READ(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
+ t &= MEMCTRL_SRS_MASK;
+ info->amap.chip_size = flash_sizes[t];
+ if (info->amap.chip_size == 0) {
+ MAP_ERR(map, "invalid flash size detected\n");
+ goto err_out;
+ }
+
+ /* get flash bus width */
+ t = MPMC_READ(fdesc->mpmc_reg) & SC_MW_MASK;
+ map->bankwidth = flash_bankwidths[t];
+ if (map->bankwidth == 0) {
+ MAP_ERR(map, "invalid bus width detected\n");
+ goto err_out;
+ }
+
+ map->phys = fdesc->phys;
+ map->size = BANK_SIZE_MAX;
+
+ simple_map_init(map);
+ map->read = adm5120_flash_read;
+ map->write = adm5120_flash_write;
+ map->copy_from = adm5120_flash_copy_from;
+
+ if (pdata) {
+ map->set_vpp = pdata->set_vpp;
+ info->amap.switch_bank = pdata->switch_bank;
+ }
+
+ info->dev = dev;
+
+ MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
+ (unsigned long)map->phys,
+ (unsigned long)info->amap.chip_size >> 10,
+ map->bankwidth*8);
+
+ return 0;
+
+err_out:
+ return -ENODEV;
+}
+
+static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
+{
+ struct map_info *map = &info->amap.map;
+
+ if (info->mtd->size <= BANK_SIZE)
+ /* no bank switching needed */
+ return;
+
+ if (info->amap.switch_bank) {
+ info->amap.chip_size = info->mtd->size;
+ return;
+ }
+
+ MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
+ (unsigned long)map->size >> 10,
+ (unsigned long)info->mtd->size >> 10);
+
+ info->mtd->size = info->amap.chip_size;
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+ struct adm5120_flash_platform_data *pdata = info->dev->dev.platform_data;
+ struct map_info *map = &info->amap.map;
+ int num_parsers;
+ const char *parser[2];
+ int err = 0;
+ int nr_parts;
+ int i;
+
+ info->nr_parts = 0;
+
+ if (pdata == NULL)
+ goto out;
+
+ if (pdata->nr_parts) {
+ MAP_INFO(map, "adding static partitions\n");
+ err = add_mtd_partitions(info->mtd, pdata->parts,
+ pdata->nr_parts);
+ if (err == 0) {
+ info->nr_parts += pdata->nr_parts;
+ goto out;
+ }
+ }
+
+ num_parsers = ARRAY_SIZE(parse_types);
+ if (num_parsers > MAX_PARSED_PARTS)
+ num_parsers = MAX_PARSED_PARTS;
+
+ parser[1] = NULL;
+ for (i=0; i<num_parsers; i++) {
+ parser[0] = parse_types[i];
+
+ MAP_INFO(map, "parsing \"%s\" partitions\n",
+ parser[0]);
+ nr_parts = parse_mtd_partitions(info->mtd, parser,
+ &info->parts[i], 0);
+
+ if (nr_parts <= 0)
+ continue;
+
+ MAP_INFO(map, "adding \"%s\" partitions\n",
+ parser[0]);
+
+ err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts);
+ if (err)
+ break;
+
+ info->nr_parts += nr_parts;
+ }
+out:
+ return err;
+}
+#else
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+ return 0;
+}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+#ifdef CONFIG_MTD_PARTITIONS
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+ int i;
+
+ if (info->nr_parts) {
+ del_mtd_partitions(info->mtd);
+ for (i=0; i<MAX_PARSED_PARTS; i++)
+ if (info->parts[i] != NULL)
+ kfree(info->parts[i]);
+ } else {
+ del_mtd_device(info->mtd);
+ }
+}
+#else
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+ del_mtd_device(info->mtd);
+}
+#endif
+
+static int adm5120_flash_remove(struct platform_device *dev)
+{
+ struct adm5120_flash_info *info;
+
+ info = platform_get_drvdata(dev);
+ if (info == NULL)
+ return 0;
+
+ platform_set_drvdata(dev, NULL);
+
+ if (info->mtd != NULL) {
+ adm5120_flash_remove_mtd(info);
+ map_destroy(info->mtd);
+ }
+
+ if (info->amap.map.virt != NULL)
+ iounmap(info->amap.map.virt);
+
+ if (info->res != NULL) {
+ release_resource(info->res);
+ kfree(info->res);
+ }
+
+ return 0;
+}
+
+static int adm5120_flash_probe(struct platform_device *dev)
+{
+ struct adm5120_flash_info *info;
+ struct map_info *map;
+ const char **probe_type;
+ int err;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ platform_set_drvdata(dev, info);
+
+ err = adm5120_flash_initinfo(info, dev);
+ if (err)
+ goto err_out;
+
+ err = adm5120_flash_initres(info);
+ if (err)
+ goto err_out;
+
+ map = &info->amap.map;
+ for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
+ probe_type++)
+ info->mtd = do_map_probe(*probe_type, map);
+
+ if (info->mtd == NULL) {
+ MAP_ERR(map, "map_probe failed\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ adm5120_flash_initbanks(info);
+
+ if (info->mtd->size < info->amap.chip_size) {
+ /* readjust resources */
+ iounmap(map->virt);
+ release_resource(info->res);
+ kfree(info->res);
+
+ info->amap.chip_size = info->mtd->size;
+ map->size = info->mtd->size;
+ MAP_INFO(map, "reducing map size to %ldKiB\n",
+ (unsigned long)map->size >> 10);
+ err = adm5120_flash_initres(info);
+ if (err)
+ goto err_out;
+ }
+
+ MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
+ (unsigned long)map->phys, (unsigned long)map->size >> 10,
+ map->bankwidth*8);
+
+ info->mtd->owner = THIS_MODULE;
+
+ err = adm5120_flash_initparts(info);
+ if (err)
+ goto err_out;
+
+ if (info->nr_parts == 0) {
+ MAP_INFO(map, "no partitions available, registering whole flash\n");
+ add_mtd_device(info->mtd);
+ }
+
+ return 0;
+
+err_out:
+ adm5120_flash_remove(dev);
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int adm5120_flash_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct adm5120_flash_info *info = platform_get_drvdata(dev);
+ int ret = 0;
+
+ if (info)
+ ret = info->mtd->suspend(info->mtd);
+
+ return ret;
+}
+
+static int adm5120_flash_resume(struct platform_device *dev)
+{
+ struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+ if (info)
+ info->mtd->resume(info->mtd);
+
+ return 0;
+}
+
+static void adm5120_flash_shutdown(struct platform_device *dev)
+{
+ struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+ if (info && info->mtd->suspend(info->mtd) == 0)
+ info->mtd->resume(info->mtd);
+}
+#endif
+
+static struct platform_driver adm5120_flash_driver = {
+ .probe = adm5120_flash_probe,
+ .remove = adm5120_flash_remove,
+#ifdef CONFIG_PM
+ .suspend = adm5120_flash_suspend,
+ .resume = adm5120_flash_resume,
+ .shutdown = adm5120_flash_shutdown,
+#endif
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init adm5120_flash_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&adm5120_flash_driver);
+
+ return err;
+}
+
+static void __exit adm5120_flash_exit(void)
+{
+ platform_driver_unregister(&adm5120_flash_driver);
+}
+
+module_init(adm5120_flash_init);
+module_exit(adm5120_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg@freemail.hu>");
+MODULE_DESCRIPTION(DRV_DESC);
/*
+ * $Id$
+ *
* Parse MyLoader-style flash partition tables and produce a Linux partition
* array to match.
*
#include <linux/mtd/partitions.h>
#include <linux/byteorder/generic.h>
-#include <asm/mach-adm5120/myloader.h>
+
+#include <prom/myloader.h>
#define NAME_LEN_MAX 20
#define NAME_MYLOADER "MyLoader"
/* Partition Table is always located on the second erase block */
offset = blocklen;
- printk(KERN_NOTICE "Searching for MyLoader partition table "
- "in %s at offset 0x%lx\n", master->name, offset);
-
- ret = master->read(master, offset, sizeof(*tab), &retlen,
- (void *)tab);
+ printk(KERN_NOTICE "%s: searching for MyLoader partition table at "
+ "offset 0x%lx\n", master->name, offset);
+ ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab);
if (ret)
goto out;
/* Check for Partition Table magic number */
if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
- printk(KERN_NOTICE "No MyLoader partition table detected "
- "in %s\n", master->name);
+ printk(KERN_NOTICE "%s: no MyLoader partition table found\n",
+ master->name);
ret = 0;
goto out_free_buf;
}
num_parts++;
}
-
mtd_parts = kzalloc((num_parts*sizeof(*mtd_part) + num_parts*NAME_LEN_MAX),
GFP_KERNEL);
mtd_part->name = names;
mtd_part->offset = 0;
mtd_part->size = blocklen;
+ mtd_part->mask_flags = MTD_WRITEABLE;
mtd_part++;
names += NAME_LEN_MAX;
mtd_part->name = names;
mtd_part->offset = blocklen;
mtd_part->size = blocklen;
+ mtd_part->mask_flags = MTD_WRITEABLE;
mtd_part++;
names += NAME_LEN_MAX;
continue;
sprintf(names, "partition%d", i);
- mtd_part->name = names;
mtd_part->offset = le32_to_cpu(part->addr);
mtd_part->size = le32_to_cpu(part->size);
+ mtd_part->name = names;
mtd_part++;
names += NAME_LEN_MAX;
}
0x41, 0x42, 0x44, 0x48, 0x50, 0x60
};
-/* default settings - unlimited TX and RX on all ports, default shaper mode */
+/* default settings - unlimited TX and RX on all ports, default shaper mode */
static unsigned char bw_matrix[SW_DEVS] = {
- 0, 0, 0, 0, 0, 0
+ 0, 0, 0, 0, 0, 0
};
static int adm5120_nrdevs;
break;
case SIOCGETBW:
err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
- if (err)
- return -EFAULT;
- break;
+ if (err)
+ return -EFAULT;
+ break;
case SIOCSETBW:
- if (!capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
- if (err)
+ if (err)
return -EFAULT;
adm5120_set_bw(bw_matrix);
- break;
+ break;
default:
return -EOPNOTSUPP;
}
if (err)
goto out;
- adm5120_nrdevs = adm5120_board.iface_num;
- if (adm5120_nrdevs > 5 && !adm5120_has_gmii())
- adm5120_nrdevs = 5;
+ adm5120_nrdevs = adm5120_eth_num_ports;
adm5120_set_reg(ADM5120_CPUP_CONF,
ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
dev->tx_timeout = adm5120_tx_timeout;
dev->watchdog_timeo = ETH_TX_TIMEOUT;
dev->set_mac_address = adm5120_sw_set_mac_address;
- /* HACK alert!!! In the original admtek driver it is asumed
- that you can read the MAC addressess from flash, but edimax
- decided to leave that space intentionally blank...
- */
- memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
- dev->dev_addr[5] += i;
+
+ memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
adm5120_write_mac(dev);
if ((err = register_netdev(dev))) {
#include <linux/usb.h>
#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
err = -ENOMEM;
goto out_mem;
}
-
+
hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd)
goto out_mem;
.probe = adm5120hcd_probe,
.remove = adm5120hcd_remove,
.driver = {
- .name = "adm5120-hcd",
+ .name = "adm5120-usbc",
.owner = THIS_MODULE,
},
};
static int __init adm5120hcd_init(void)
{
- if (usb_disabled())
+ int ret;
+
+ if (usb_disabled()) {
+ printk(KERN_DEBUG PFX "USB support is disabled\n");
return -ENODEV;
- if (!adm5120_board.has_usb) {
- printk(KERN_DEBUG PFX "this board does not have USB\n");
+ }
+
+ if (mips_machgroup != MACH_GROUP_ADM5120) {
+ printk(KERN_DEBUG PFX "unsupported machine group\n");
return -ENODEV;
}
- printk(KERN_INFO PFX "registered\n");
- return platform_driver_register(&adm5120hcd_driver);
+ ret = platform_driver_register(&adm5120hcd_driver);
+ if (ret == 0)
+ printk(KERN_INFO PFX "registered\n");
+
+ return ret;
}
static void __exit adm5120hcd_exit(void)
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 board definitions
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_BOARD_H_
+#define _ADM5120_BOARD_H_
+
+#include <linux/init.h>
+#include <linux/list.h>
+
+#define ADM5120_BOARD_NAMELEN 64
+
+struct adm5120_board {
+ unsigned long mach_type;
+ char name[ADM5120_BOARD_NAMELEN];
+
+ void (*board_setup)(void);
+ void (*board_reset)(void);
+
+ unsigned int num_eth_ports;
+ unsigned int num_devices;
+ struct platform_device **devices;
+
+ struct list_head list;
+};
+
+extern void adm5120_board_register(struct adm5120_board *) __init;
+
+#endif /* _ADM5120_BOARD_H_ */
/*
- * $Id$
+ * $Id$
*
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
*/
#ifndef _ADM5120_INFO_H
#include <linux/types.h>
-#define ADM5120_BOARD_NAMELEN 64
-
-struct adm5120_board {
- char name[ADM5120_BOARD_NAMELEN];
- unsigned long mach_type;
- unsigned int iface_num; /* Number of Ethernet interfaces */
- unsigned int has_usb; /* USB controller presence flag */
- u32 mem_size; /* onboard memory size */
- u32 flash0_size; /* Flash 0 size */
-};
-
-extern struct adm5120_board adm5120_board;
-
-extern unsigned int adm5120_boot_loader;
-#define BOOT_LOADER_UNKNOWN 0
-#define BOOT_LOADER_CFE 1
-#define BOOT_LOADER_UBOOT 2
-#define BOOT_LOADER_MYLOADER 3
-#define BOOT_LOADER_ROUTERBOOT 4
-#define BOOT_LOADER_BOOTBASE 5
-#define BOOT_LOADER_LAST 5
+extern unsigned int adm5120_prom_type;
+#define ADM5120_PROM_GENERIC 0
+#define ADM5120_PROM_CFE 1
+#define ADM5120_PROM_MYLOADER 2
+#define ADM5120_PROM_ROUTERBOOT 3
+#define ADM5120_PROM_BOOTBASE 4
+#define ADM5120_PROM_UBOOT 5
+#define ADM5120_PROM_LAST 5
extern unsigned int adm5120_product_code;
extern unsigned int adm5120_revision;
extern unsigned long adm5120_memsize;
-extern void adm5120_info_init(void);
+/*
+ * TODO:remove adm5120_eth* variables when the switch driver will be
+ * converted into a real platform driver
+ */
+extern unsigned int adm5120_eth_num_ports;
+extern unsigned char adm5120_eth_macs[6][6];
+
+extern void adm5120_mem_init(void) __init;
+extern void adm5120_time_init(void) __init;
+extern void adm5120_ndelay(u32 ns);
+
+extern void adm5120_restart(char *command);
+extern void adm5120_halt(void);
+extern void adm5120_power_off(void);
+
+extern void (*adm5120_board_reset)(void);
static inline int adm5120_package_pqfp(void)
{
return (adm5120_package == ADM5120_PACKAGE_BGA);
}
-static inline char *adm5120_board_name(void)
-{
- return adm5120_board.name;
-}
-
-static inline u32 adm5120_board_memsize(void)
-{
- return adm5120_board.mem_size;
-}
-
#endif /* _ADM5120_INFO_H */
/*
+ * $Id$
+ *
* ADM5120 interrupt controller definitions
*
* This header file defines the hardware registers of the ADM5120 SoC
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
+
#ifndef _ADM5120_INTC_H_
#define _ADM5120_INTC_H_
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 specific platform definitions
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PLATFORM_H_
+#define _ADM5120_PLATFORM_H_
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+struct adm5120_flash_platform_data {
+ void (*set_vpp)(struct map_info *, int);
+ void (*switch_bank)(unsigned);
+ unsigned int nr_parts;
+ struct mtd_partition *parts;
+};
+
+struct adm5120_switch_platform_data {
+ /* TODO: not yet implemented */
+};
+
+struct adm5120_pci_irq {
+ u8 slot;
+ u8 func;
+ u8 pin;
+ unsigned irq;
+};
+
+struct adm5120_pci_platform_data {
+ unsigned int nr_irqs;
+ struct adm5120_pci_irq *irqs;
+};
+
+extern struct adm5120_flash_platform_data adm5120_flash0_data;
+extern struct adm5120_flash_platform_data adm5120_flash1_data;
+extern struct adm5120_pci_platform_data adm5120_pci_data;
+extern struct adm5120_switch_platform_data adm5120_switch_data;
+
+extern struct platform_device adm5120_flash0_device;
+extern struct platform_device adm5120_flash1_device;
+extern struct platform_device adm5120_usbc_device;
+extern struct platform_device adm5120_pci_device;
+extern struct platform_device adm5120_switch_device;
+
+#endif /* _ADM5120_PLATFORM_H_ */
--- /dev/null
+/*
+ * ADM5120 UART definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in UARTs.
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_UART_H_
+#define _ADM5120_UART_H_
+
+#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
+
+#define UART_REG_DATA 0x00
+#define UART_REG_RSR 0x04
+#define UART_REG_ECR UART_REG_RSR
+#define UART_REG_LCRH 0x08
+#define UART_REG_LCRM 0x0C
+#define UART_REG_LCRL 0x10
+#define UART_REG_CTRL 0x14
+#define UART_REG_FLAG 0x18
+
+/* Receive Status Register bits */
+#define UART_RSR_FE ( 1 << 0 )
+#define UART_RSR_PE ( 1 << 1 )
+#define UART_RSR_BE ( 1 << 2 )
+#define UART_RSR_OE ( 1 << 3 )
+#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
+
+#define UART_ECR_ALL 0xFF
+
+/* Line Control High register bits */
+#define UART_LCRH_BRK ( 1 << 0 ) /* send break */
+#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */
+#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */
+#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */
+#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */
+#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */
+
+#define UART_LCRH_WLEN5 ( 0 << 5 )
+#define UART_LCRH_WLEN6 ( 1 << 5 )
+#define UART_LCRH_WLEN7 ( 2 << 5 )
+#define UART_LCRH_WLEN8 ( 3 << 5 )
+
+/* Control register bits */
+#define UART_CTRL_EN ( 1 << 0 )
+
+/* Flag register bits */
+#define UART_FLAG_CTS ( 1 << 0 )
+#define UART_FLAG_DSR ( 1 << 1 )
+#define UART_FLAG_DCD ( 1 << 2 )
+#define UART_FLAG_BUSY ( 1 << 3 )
+#define UART_FLAG_RXFE ( 1 << 4 )
+#define UART_FLAG_TXFF ( 1 << 5 )
+#define UART_FLAG_RXFF ( 1 << 6 )
+#define UART_FLAG_TXFE ( 1 << 7 )
+
+#endif /* _ADM5120_UART_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2006,2007 Gabor Juhos
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- * <header>
- * [<block descriptor 0>]
- * ...
- * [<block descriptor n>]
- * <null block descriptor>
- * [<block data 0>]
- * ...
- * [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE 0x4C594D00
-#define MYLO_MAGIC_20021103 0x20021103
-#define MYLO_MAGIC_20021107 0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX 0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G 0x0078
-#define DEVID_COMPEX_NP28G 0x044C
-#define DEVID_COMPEX_NP28GHS 0x044E
-#define DEVID_COMPEX_WP54Gv1C 0x0514
-#define DEVID_COMPEX_WP54G 0x0515
-#define DEVID_COMPEX_WP54AG 0x0546
-#define DEVID_COMPEX_WPP54AG 0x0550
-#define DEVID_COMPEX_WPP54G 0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18 0x047E
-#define DEVID_COMPEX_NP18A 0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M 0x03E8
-#define DEVID_COMPEX_NP26G16M 0x03E9
-
-struct mylo_fw_header {
- uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
- uint32_t crc; /* CRC of the whole firmware */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint16_t vid; /* vendor ID */
- uint16_t did; /* device ID */
- uint16_t svid; /* sub vendor ID */
- uint16_t sdid; /* sub device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi; /* FIXME: firmware version high? */
- uint32_t fwlo; /* FIXME: firmware version low? */
- uint32_t flags; /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
- uint32_t type; /* block type */
- uint32_t addr; /* relative address to flash start */
- uint32_t dlen; /* size of block data in bytes */
- uint32_t blen; /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED 0
-#define FW_DESC_TYPE_USED 1
-
-struct mylo_partition {
- uint16_t flags; /* partition flags */
- uint16_t type; /* type of the partition */
- uint32_t addr; /* relative address of the partition from the
- flash start */
- uint32_t size; /* size of the partition in bytes */
- uint32_t param; /* if this is the active partition, the
- MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
- * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
- * before decompression */
-#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE 0
-#define PARTITION_TYPE_USED 1
-
-#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
- partition table */
-
-struct mylo_partition_table {
- uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint32_t res2; /* unknown/unused */
- struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
- uint32_t len; /* length of the partition data */
- uint32_t crc; /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
- uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t mylo_ver;
- uint16_t vid; /* Vendor ID */
- uint16_t did; /* Device ID */
- uint16_t svid; /* Sub Vendor ID */
- uint16_t sdid; /* Sub Device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi;
- uint32_t fwlo;
- uint32_t tftp_addr;
- uint32_t prog_start;
- uint32_t flash_size; /* Size of boot FLASH in bytes */
- uint32_t dram_size; /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
- uint8_t mac[6];
- uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
- in the board parameters */
-
-struct mylo_board_params {
- uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t res2;
- struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-#endif /* _MYLOADER_H_*/
--- /dev/null
+/*
+ * $Id$
+ *
+ * Broadcom's CFE definitions
+ *
+ * Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
--- /dev/null
+/*
+ * $Id$
+ *
+ * Generic prom definitions
+ *
+ * Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
--- /dev/null
+/*
+ * $Id$
+ *
+ * Compex's MyLoader specific definitions
+ *
+ * Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ * <header>
+ * [<block descriptor 0>]
+ * ...
+ * [<block descriptor n>]
+ * <null block descriptor>
+ * [<block data 0>]
+ * ...
+ * [<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE 0x4C594D00
+#define MYLO_MAGIC_20021103 0x20021103
+#define MYLO_MAGIC_20021107 0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
+#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX 0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G 0x0078
+#define DEVID_COMPEX_NP28G 0x044C
+#define DEVID_COMPEX_NP28GHS 0x044E
+#define DEVID_COMPEX_WP54Gv1C 0x0514
+#define DEVID_COMPEX_WP54G 0x0515
+#define DEVID_COMPEX_WP54AG 0x0546
+#define DEVID_COMPEX_WPP54AG 0x0550
+#define DEVID_COMPEX_WPP54G 0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18 0x047E
+#define DEVID_COMPEX_NP18A 0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M 0x03E8
+#define DEVID_COMPEX_NP26G16M 0x03E9
+
+struct mylo_fw_header {
+ uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
+ uint32_t crc; /* CRC of the whole firmware */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint16_t vid; /* vendor ID */
+ uint16_t did; /* device ID */
+ uint16_t svid; /* sub vendor ID */
+ uint16_t sdid; /* sub device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi; /* FIXME: firmware version high? */
+ uint32_t fwlo; /* FIXME: firmware version low? */
+ uint32_t flags; /* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+ uint32_t type; /* block type */
+ uint32_t addr; /* relative address to flash start */
+ uint32_t dlen; /* size of block data in bytes */
+ uint32_t blen; /* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED 0
+#define FW_DESC_TYPE_USED 1
+
+struct mylo_partition {
+ uint16_t flags; /* partition flags */
+ uint16_t type; /* type of the partition */
+ uint32_t addr; /* relative address of the partition from the
+ flash start */
+ uint32_t size; /* size of the partition in bytes */
+ uint32_t param; /* if this is the active partition, the
+ MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
+ * MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
+ * before decompression */
+#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE 0
+#define PARTITION_TYPE_USED 1
+
+#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
+ partition table */
+
+struct mylo_partition_table {
+ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint32_t res2; /* unknown/unused */
+ struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+ uint32_t len; /* length of the partition data */
+ uint32_t crc; /* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t mylo_ver;
+ uint16_t vid; /* Vendor ID */
+ uint16_t did; /* Device ID */
+ uint16_t svid; /* Sub Vendor ID */
+ uint16_t sdid; /* Sub Device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi;
+ uint32_t fwlo;
+ uint32_t tftp_addr;
+ uint32_t prog_start;
+ uint32_t flash_size; /* Size of boot FLASH in bytes */
+ uint32_t dram_size; /* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+ uint8_t mac[6];
+ uint8_t csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
+ in the board parameters */
+
+struct mylo_board_params {
+ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t res2;
+ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+struct myloader_info {
+ u32 vid;
+ u32 did;
+ u32 svid;
+ u32 sdid;
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
+#endif /* _MYLOADER_H_*/
--- /dev/null
+/*
+ * $Id$
+ *
+ * Mikrotik's RouterBOOT definitions
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ROUTERBOOT_H
+#define _ROUTERBOOT_H
+
+#define RB_MAC_SIZE 6
+#define RB_MAX_MAC_COUNT 6
+
+struct rb_bios_settings {
+ u32 hs_offs; /* hard settings offset */
+ u32 hs_size; /* hard settings size */
+ u32 fw_offs; /* firmware offset */
+ u32 ss_offs; /* soft settings offset */
+ u32 ss_size; /* soft settings size */
+};
+
+struct rb_hard_settings {
+ char *name; /* board name */
+ char *bios_ver; /* BIOS version */
+ u32 mem_size; /* memory size in bytes */
+ u32 mac_count; /* number of mac addresses */
+ u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */
+};
+
+/*
+ * Magic numbers
+ */
+#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
+#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
+#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
+
+#define RB_ID_TERMINATOR 0
+
+/*
+ * ID values for Hardware settings
+ */
+#define RB_ID_HARD_01 1
+#define RB_ID_HARD_02 2
+#define RB_ID_FLASH_INFO 3
+#define RB_ID_MAC_ADDRESS_PACK 4
+#define RB_ID_BOARD_NAME 5
+#define RB_ID_BIOS_VERSION 6
+#define RB_ID_HARD_07 7
+#define RB_ID_SDRAM_TIMINGS 8
+#define RB_ID_DEVICE_TIMINGS 9
+#define RB_ID_SOFTWARE_ID 10
+#define RB_ID_SERIAL_NUMBER 11
+#define RB_ID_HARD_12 12
+#define RB_ID_MEMORY_SIZE 13
+#define RB_ID_MAC_ADDRESS_COUNT 14
+
+/*
+ * ID values for Software settings
+ */
+#define RB_ID_UART_SPEED 1
+#define RB_ID_BOOT_DELAY 2
+#define RB_ID_BOOT_DEVICE 3
+#define RB_ID_BOOT_KEY 4
+#define RB_ID_CPU_MODE 5
+#define RB_ID_FW_VERSION 6
+#define RB_ID_SOFT_07 7
+#define RB_ID_SOFT_08 8
+#define RB_ID_BOOT_PROTOCOL 9
+#define RB_ID_SOFT_10 10
+#define RB_ID_SOFT_11 11
+
+/*
+ * UART_SPEED values
+ */
+#define RB_UART_SPEED_115200 0
+#define RB_UART_SPEED_57600 1
+#define RB_UART_SPEED_38400 2
+#define RB_UART_SPEED_19200 3
+#define RB_UART_SPEED_9600 4
+#define RB_UART_SPEED_4800 5
+#define RB_UART_SPEED_2400 6
+#define RB_UART_SPEED_1200 7
+
+/*
+ * BOOT_DELAY values
+ */
+#define RB_BOOT_DELAY_0SEC 0
+#define RB_BOOT_DELAY_1SEC 1
+#define RB_BOOT_DELAY_2SEC 2
+
+/*
+ * BOOT_DEVICE values
+ */
+#define RB_BOOT_DEVICE_ETHER 0
+#define RB_BOOT_DEVICE_NANDETH 1
+#define RB_BOOT_DEVICE_ETHONCE 2
+#define RB_BOOT_DEVICE_NANDONLY 3
+
+/*
+ * BOOT_KEY values
+ */
+#define RB_BOOT_KEY_ANY 0
+#define RB_BOOT_KEY_DEL 1
+
+/*
+ * CPU_MODE values
+ */
+#define RB_CPU_MODE_POWERSAVE 0
+#define RB_CPU_MODE_REGULAR 1
+
+/*
+ * BOOT_PROTOCOL values
+ */
+#define RB_BOOT_PROTOCOL_BOOTP 0
+#define RB_BOOT_PROTOCOL_DHCP 1
+
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
+#endif /* _ROUTERBOOT_H */
--- /dev/null
+/*
+ * $Id$
+ *
+ * ZyNOS (ZyXEL's Networking OS) definitions
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ZYNOS_H
+#define _ZYNOS_H
+
+#define ZYNOS_NAME_LEN 32
+#define ZYNOS_FEAT_BYTES 22
+#define ZYNOS_MAC_LEN 6
+
+struct zynos_board_info {
+ unsigned char vendor[ZYNOS_NAME_LEN];
+ unsigned char product[ZYNOS_NAME_LEN];
+ u32 bootext_addr;
+ u32 res0;
+ u16 board_id;
+ u8 res1[6];
+ u8 feat_other[ZYNOS_FEAT_BYTES];
+ u8 feat_main;
+ u8 res2;
+ u8 mac[ZYNOS_MAC_LEN];
+ u8 country;
+ u8 dbgflag;
+} __attribute__ ((packed));
+
+/*
+ * Vendor IDs
+ */
+#define ZYNOS_VENDOR_ID_ZYXEL 0
+#define ZYNOS_VENDOR_ID_NETGEAR 1
+#define ZYNOS_VENDOR_ID_DLINK 2
+#define ZYNOS_VENDOR_ID_OTHER 3
+#define ZYNOS_VENDOR_ID_LUCENT 4
+
+/*
+ * Vendor names
+ */
+#define ZYNOS_VENDOR_DLINK "D-Link"
+#define ZYNOS_VENDOR_LUCENT "LUCENT"
+#define ZYNOS_VENDOR_NETGEAR "NetGear"
+#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
+
+/*
+ * Board IDs (big-endian)
+ */
+#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
+#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
+#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
+#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
+#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
+#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
+#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
+#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
+#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
+#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
+#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
+#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
+#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
+#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
+#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
+
+/*
+ * Some magic numbers (big-endian)
+ */
+#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
+#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
+
+struct bootbase_info {
+ u16 vendor_id;
+ u16 board_id;
+ u8 mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
+#endif /* _ZYNOS_H */
+++ /dev/null
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _ROUTERBOOT_H
-#define _ROUTERBOOT_H
-
-#define RB_MAC_SIZE 6
-#define RB_MAX_MAC_COUNT 6
-
-struct rb_bios_settings {
- u32 hs_offs; /* hard settings offset */
- u32 hs_size; /* hard settings size */
- u32 fw_offs; /* firmware offset */
- u32 ss_offs; /* soft settings offset */
- u32 ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
- char *name; /* board name */
- char *bios_ver; /* BIOS version */
- u32 mem_size; /* memory size in bytes */
- u32 mac_count; /* number of mac addresses */
- u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */
-};
-
-/*
- * Magic numbers
- */
-#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
-#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
-#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
-
-#define RB_ID_TERMINATOR 0
-
-/*
- * ID values for Hardware settings
- */
-#define RB_ID_HARD_01 1
-#define RB_ID_HARD_02 2
-#define RB_ID_FLASH_INFO 3
-#define RB_ID_MAC_ADDRESS_PACK 4
-#define RB_ID_BOARD_NAME 5
-#define RB_ID_BIOS_VERSION 6
-#define RB_ID_HARD_07 7
-#define RB_ID_SDRAM_TIMINGS 8
-#define RB_ID_DEVICE_TIMINGS 9
-#define RB_ID_SOFTWARE_ID 10
-#define RB_ID_SERIAL_NUMBER 11
-#define RB_ID_HARD_12 12
-#define RB_ID_MEMORY_SIZE 13
-#define RB_ID_MAC_ADDRESS_COUNT 14
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_UART_SPEED 1
-#define RB_ID_BOOT_DELAY 2
-#define RB_ID_BOOT_DEVICE 3
-#define RB_ID_BOOT_KEY 4
-#define RB_ID_CPU_MODE 5
-#define RB_ID_FW_VERSION 6
-#define RB_ID_SOFT_07 7
-#define RB_ID_SOFT_08 8
-#define RB_ID_BOOT_PROTOCOL 9
-#define RB_ID_SOFT_10 10
-#define RB_ID_SOFT_11 11
-
-/*
- * UART_SPEED values
- */
-#define RB_UART_SPEED_115200 0
-#define RB_UART_SPEED_57600 1
-#define RB_UART_SPEED_38400 2
-#define RB_UART_SPEED_19200 3
-#define RB_UART_SPEED_9600 4
-#define RB_UART_SPEED_4800 5
-#define RB_UART_SPEED_2400 6
-#define RB_UART_SPEED_1200 7
-
-/*
- * BOOT_DELAY values
- */
-#define RB_BOOT_DELAY_0SEC 0
-#define RB_BOOT_DELAY_1SEC 1
-#define RB_BOOT_DELAY_2SEC 2
-
-/*
- * BOOT_DEVICE values
- */
-#define RB_BOOT_DEVICE_ETHER 0
-#define RB_BOOT_DEVICE_NANDETH 1
-#define RB_BOOT_DEVICE_ETHONCE 2
-#define RB_BOOT_DEVICE_NANDONLY 3
-
-/*
- * BOOT_KEY values
- */
-#define RB_BOOT_KEY_ANY 0
-#define RB_BOOT_KEY_DEL 1
-
-/*
- * CPU_MODE values
- */
-#define RB_CPU_MODE_POWERSAVE 0
-#define RB_CPU_MODE_REGULAR 1
-
-/*
- * BOOT_PROTOCOL values
- */
-#define RB_BOOT_PROTOCOL_BOOTP 0
-#define RB_BOOT_PROTOCOL_DHCP 1
-
-#endif /* _ROUTERBOOT_H */
+++ /dev/null
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN 32
-#define ZYNOS_FEAT_BYTES 22
-#define ZYNOS_MAC_LEN 6
-
-struct zynos_board_info {
- unsigned char vendor[ZYNOS_NAME_LEN];
- unsigned char product[ZYNOS_NAME_LEN];
- u32 bootext_addr;
- u32 res0;
- u16 board_id;
- u8 res1[6];
- u8 feat_other[ZYNOS_FEAT_BYTES];
- u8 feat_main;
- u8 res2;
- u8 mac[ZYNOS_MAC_LEN];
- u8 country;
- u8 dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL 0
-#define ZYNOS_VENDOR_ID_NETGEAR 1
-#define ZYNOS_VENDOR_ID_DLINK 2
-#define ZYNOS_VENDOR_ID_OTHER 3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK "D-Link"
-#define ZYNOS_VENDOR_LUCENT "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR "NetGear"
-#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
-#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
-#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
-#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
-
-#endif /* _ZYNOS_H */
-Index: linux-2.6.22-rc6/arch/mips/Kconfig
+Index: linux-2.6.22/arch/mips/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Kconfig
-+++ linux-2.6.22-rc6/arch/mips/Kconfig
-@@ -15,6 +15,17 @@ choice
+--- linux-2.6.22.orig/arch/mips/Kconfig
++++ linux-2.6.22/arch/mips/Kconfig
+@@ -15,6 +15,18 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_ADM5120
+ bool "Support for ADM5120 SoC"
+ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_EARLY_PRINTK
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
config MACH_ALCHEMY
bool "Alchemy processor based machines"
-@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
+@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938
endchoice
source "arch/mips/au1000/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
-Index: linux-2.6.22-rc6/arch/mips/Makefile
+Index: linux-2.6.22/arch/mips/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Makefile
-+++ linux-2.6.22-rc6/arch/mips/Makefile
-@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
+--- linux-2.6.22.orig/arch/mips/Makefile
++++ linux-2.6.22/arch/mips/Makefile
+@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+# ADMtek 5120
+#
+
++libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
+
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+Index: linux-2.6.22/include/asm-mips/bootinfo.h
===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+--- linux-2.6.22.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22/include/asm-mips/bootinfo.h
@@ -213,6 +213,57 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+ * Valid machtype for group ADMtek ADM5120
+ */
+#define MACH_GROUP_ADM5120 26
-+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
++#define MACH_ADM5120_GENERIC 0 /* Generic board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+Index: linux-2.6.22/drivers/mtd/maps/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
-@@ -620,5 +620,10 @@ config MTD_PLATRAM
+--- linux-2.6.22.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,9 @@ config MTD_PLATRAM
This selection automatically selects the map_ram driver.
+config MTD_ADM5120
-+ tristate "Map driver for ADMtek ADM5120 boards"
++ tristate "Map driver for ADM5120 based boards"
+ depends on MIPS_ADM5120
-+ select MTD_CFI_AMDSTD
+
endmenu
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+Index: linux-2.6.22/drivers/mtd/maps/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+--- linux-2.6.22.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22/drivers/mtd/maps/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
obj-$(CONFIG_MTD_LASAT) += lasat.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
-Index: linux-2.6.22-rc6/drivers/net/Kconfig
+Index: linux-2.6.22/drivers/net/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Kconfig
-+++ linux-2.6.22-rc6/drivers/net/Kconfig
+--- linux-2.6.22.orig/drivers/net/Kconfig
++++ linux-2.6.22/drivers/net/Kconfig
@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.22-rc6/drivers/net/Makefile
+Index: linux-2.6.22/drivers/net/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Makefile
-+++ linux-2.6.22-rc6/drivers/net/Makefile
+--- linux-2.6.22.orig/drivers/net/Makefile
++++ linux-2.6.22/drivers/net/Makefile
@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
-Index: linux-2.6.22-rc6/drivers/serial/Makefile
+Index: linux-2.6.22/drivers/serial/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Makefile
-+++ linux-2.6.22-rc6/drivers/serial/Makefile
+--- linux-2.6.22.orig/drivers/serial/Makefile
++++ linux-2.6.22/drivers/serial/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.22-rc6/include/linux/serial_core.h
+Index: linux-2.6.22/include/linux/serial_core.h
===================================================================
---- linux-2.6.22-rc6.orig/include/linux/serial_core.h
-+++ linux-2.6.22-rc6/include/linux/serial_core.h
+--- linux-2.6.22.orig/include/linux/serial_core.h
++++ linux-2.6.22/include/linux/serial_core.h
@@ -143,6 +143,9 @@
#define PORT_KS8695 76
#ifdef __KERNEL__
#include <linux/compiler.h>
-Index: linux-2.6.22-rc6/drivers/serial/Kconfig
+Index: linux-2.6.22/drivers/serial/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
-+++ linux-2.6.22-rc6/drivers/serial/Kconfig
+--- linux-2.6.22.orig/drivers/serial/Kconfig
++++ linux-2.6.22/drivers/serial/Kconfig
@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
comment "Non-8250 serial port support"
-Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
+Index: linux-2.6.22/drivers/usb/core/hub.c
===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
-+++ linux-2.6.22-rc6/drivers/usb/core/hub.c
+--- linux-2.6.22.orig/drivers/usb/core/hub.c
++++ linux-2.6.22/drivers/usb/core/hub.c
@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
re_enumerate:
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
-Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
+Index: linux-2.6.22/drivers/usb/host/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
-@@ -224,3 +224,6 @@ config USB_SL811_CS
+--- linux-2.6.22.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22/drivers/usb/host/Kconfig
+@@ -237,3 +237,6 @@ config USB_SL811_CS
To compile this driver as a module, choose M here: the
module will be called "sl811_cs".
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support"
+ depends on USB && MIPS_ADM5120
-Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
+Index: linux-2.6.22/drivers/usb/host/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/host/Makefile
+--- linux-2.6.22.orig/drivers/usb/host/Makefile
++++ linux-2.6.22/drivers/usb/host/Makefile
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
-Index: linux-2.6.22-rc6/drivers/usb/Kconfig
+Index: linux-2.6.22/drivers/usb/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/Kconfig
+--- linux-2.6.22.orig/drivers/usb/Kconfig
++++ linux-2.6.22/drivers/usb/Kconfig
@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
source "drivers/usb/image/Kconfig"
comment "USB port drivers"
depends on USB
-Index: linux-2.6.22-rc6/drivers/usb/Makefile
+Index: linux-2.6.22/drivers/usb/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/Makefile
+--- linux-2.6.22.orig/drivers/usb/Makefile
++++ linux-2.6.22/drivers/usb/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
-Index: linux-2.6.22-rc6/drivers/leds/Kconfig
+Index: linux-2.6.22/drivers/leds/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
-+++ linux-2.6.22-rc6/drivers/leds/Kconfig
+--- linux-2.6.22.orig/drivers/leds/Kconfig
++++ linux-2.6.22/drivers/leds/Kconfig
@@ -20,6 +20,27 @@ config LEDS_CLASS
comment "LED drivers"
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.22-rc6/drivers/leds/Makefile
+Index: linux-2.6.22/drivers/leds/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Makefile
-+++ linux-2.6.22-rc6/drivers/leds/Makefile
+--- linux-2.6.22.orig/drivers/leds/Makefile
++++ linux-2.6.22/drivers/leds/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
-Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
+Index: linux-2.6.22/arch/mips/pci/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
-+++ linux-2.6.22-rc6/arch/mips/pci/Makefile
+--- linux-2.6.22.orig/arch/mips/pci/Makefile
++++ linux-2.6.22/arch/mips/pci/Makefile
@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.22-rc6/include/linux/pci_ids.h
+Index: linux-2.6.22/include/linux/pci_ids.h
===================================================================
---- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
-+++ linux-2.6.22-rc6/include/linux/pci_ids.h
-@@ -1712,6 +1712,9 @@
+--- linux-2.6.22.orig/include/linux/pci_ids.h
++++ linux-2.6.22/include/linux/pci_ids.h
+@@ -1713,6 +1713,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+++ /dev/null
-Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
-+++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
-@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
-
- #endif /* CONFIG_CPU_MIPSR2 */
-
-+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
-+
-+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
-+{
-+ __asm__ (
-+ " sh %2, 0xCA(%1) \n"
-+ " lhu %0, 0xCC(%1) \n"
-+ : "=r" (x)
-+ : "r" (0xB2000000), "r" (x));
-+
-+ return x;
-+}
-+
-+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
-+{
-+ __asm__ (
-+ " sw %2, 0xC8(%1) \n"
-+ " lw %0, 0xCC(%1) \n"
-+ : "=r" (x)
-+ : "r" (0xB2000000), "r" (x));
-+
-+ return x;
-+}
-+
-+#define __arch__swab16(x) ___adm5120__swab16(x)
-+#define __arch__swab32(x) ___adm5120__swab32(x)
-+
-+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
-+
- #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- # define __BYTEORDER_HAS_U64__
- # define __SWAB_64_THRU_32__
-Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
+Index: linux-2.6.22/drivers/mtd/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/Kconfig
++++ linux-2.6.22/drivers/mtd/Kconfig
@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
comment "User Modules And Translation Layers"
config MTD_CHAR
-Index: linux-2.6.22-rc6/drivers/mtd/Makefile
+Index: linux-2.6.22/drivers/mtd/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/Makefile
+--- linux-2.6.22.orig/drivers/mtd/Makefile
++++ linux-2.6.22/drivers/mtd/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+Index: linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.22.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+Index: linux-2.6.22/drivers/mtd/chips/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22/drivers/mtd/chips/Kconfig
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
--- /dev/null
+Index: linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+@@ -121,6 +121,10 @@
+ #define UPD29F064115 0x221C
+
+ /* PMC */
++#define PM39LV512 0x001B
++#define PM39LV010 0x001C
++#define PM39LV020 0x003D
++#define PM39LV040 0x003E
+ #define PM49FL002 0x006D
+ #define PM49FL004 0x006E
+ #define PM49FL008 0x006A
+@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x04000,1),
+ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV512,
++ .name = "PMC Pm39LV512",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++ },
++ .DevSize = SIZE_64KiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 1,
++ .regions = {
++ ERASEINFO(0x01000,16),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV010,
++ .name = "PMC Pm39LV010",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++ },
++ .DevSize = SIZE_128KiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 1,
++ .regions = {
++ ERASEINFO(0x01000,32),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV020,
++ .name = "PMC Pm39LV020",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++ },
++ .DevSize = SIZE_256KiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 1,
++ .regions = {
++ ERASEINFO(0x01000,64),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV040,
++ .name = "PMC Pm39LV040",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++ },
++ .DevSize = SIZE_512KiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 1,
++ .regions = {
++ ERASEINFO(0x01000,128),
++ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM49FL002,
-Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
+Index: linux-2.6.22/arch/mips/kernel/head.S
===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
-+++ linux-2.6.22-rc6/arch/mips/kernel/head.S
+--- linux-2.6.22.orig/arch/mips/kernel/head.S
++++ linux-2.6.22/arch/mips/kernel/head.S
@@ -129,14 +129,19 @@
#endif
.endm
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+Index: linux-2.6.22/drivers/mtd/nand/Kconfig
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22/drivers/mtd/nand/Kconfig
@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
help
Support for NAND flash on Technologic Systems TS-7250 platform.
config MTD_NAND_IDS
tristate
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+Index: linux-2.6.22/drivers/mtd/nand/Makefile
===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+--- linux-2.6.22.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22/drivers/mtd/nand/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
ARCH:=mips
BOARD:=adm5120eb
BOARDNAME:=ADM5120 (Big Endian)
-FEATURES:=squashfs pci usb
+FEATURES:=squashfs pci usb broken
LINUX_VERSION:=2.6.22.1
projects / openwrt / staging / wigyori.git / commitdiff