ar71xx: init switch hw_reset on the TL-WR1043ND board
authorGabor Juhos <juhosg@openwrt.org>
Thu, 2 Aug 2012 09:54:28 +0000 (09:54 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Thu, 2 Aug 2012 09:54:28 +0000 (09:54 +0000)
SVN-Revision: 32944

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c

index e789b402b8d5078d45c5631db0545bbed729ac89..61aeb52d02bbb7c9ae24388dcf796e34038cad25 100644 (file)
@@ -10,7 +10,9 @@
 
 #include <linux/platform_device.h>
 #include <linux/rtl8366.h>
+
 #include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
 
 #include "dev-eth.h"
 #include "dev-m25p80.h"
@@ -81,9 +83,18 @@ static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
        }
 };
 
+static void tl_wr1043nd_rtl8366rb_hw_reset(bool active)
+{
+       if (active)
+               ath79_device_reset_set(AR71XX_RESET_GE0_PHY);
+       else
+               ath79_device_reset_clear(AR71XX_RESET_GE0_PHY);
+}
+
 static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
-       .gpio_sda        = TL_WR1043ND_GPIO_RTL8366_SDA,
-       .gpio_sck        = TL_WR1043ND_GPIO_RTL8366_SCK,
+       .gpio_sda       = TL_WR1043ND_GPIO_RTL8366_SDA,
+       .gpio_sck       = TL_WR1043ND_GPIO_RTL8366_SCK,
+       .hw_reset       = tl_wr1043nd_rtl8366rb_hw_reset,
 };
 
 static struct platform_device tl_wr1043nd_rtl8366rb_device = {
@@ -99,6 +110,8 @@ static void __init tl_wr1043nd_setup(void)
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
        u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
+       tl_wr1043nd_rtl8366rb_hw_reset(true);
+
        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
        ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;