ar71xx: add serial driver for the AR933X UART
authorGabor Juhos <juhosg@openwrt.org>
Tue, 31 May 2011 22:53:40 +0000 (22:53 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Tue, 31 May 2011 22:53:40 +0000 (22:53 +0000)
SVN-Revision: 27065

target/linux/ar71xx/config-2.6.37
target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h [new file with mode: 0644]
target/linux/ar71xx/files/drivers/serial/ar933x_uart.c [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch [new file with mode: 0644]

index 2aaaaf097dd7f6aa5d82d818236028f39790793b..fe6119e84fde3dd96138cf6d52aeaa6725e2e969 100644 (file)
@@ -173,6 +173,9 @@ CONFIG_RTL8366_SMI=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SOC_AR71XX=y
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h
new file mode 100644 (file)
index 0000000..6cb30f2
--- /dev/null
@@ -0,0 +1,18 @@
+/*
+ *  Platform data definition for Atheros AR933X UART
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR933X_UART_PLATFORM_H
+#define _AR933X_UART_PLATFORM_H
+
+struct ar933x_uart_platform_data {
+       unsigned        uartclk;
+};
+
+#endif /* _AR933X_UART_PLATFORM_H */
diff --git a/target/linux/ar71xx/files/drivers/serial/ar933x_uart.c b/target/linux/ar71xx/files/drivers/serial/ar933x_uart.c
new file mode 100644 (file)
index 0000000..ff0170f
--- /dev/null
@@ -0,0 +1,1282 @@
+/*
+ *  linux/drivers/serial/hornet_serial.c
+ *
+ *  Driver for hornet serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright (C) 2010 Ryan Hsu.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  $Id$
+ *
+ * A note about mapbase / membase
+ *
+ *  mapbase is the physical address of the IO port.
+ *  membase is an 'ioremapped' cookie.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ar71xx/ar933x_uart_platform.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+#define ar7240_reg_rmw_clear(_reg, _val)       do {} while (0)
+
+#define DRIVER_NAME "ar933x-uart"
+
+#define AR933X_UART_REGS_SIZE  20
+#define AR933X_UART_FIFO_SIZE  16
+
+/*
+ * Uart block
+ */
+#define UARTDATA_UARTTXCSR_MSB                 9
+#define UARTDATA_UARTTXCSR_LSB                 9
+#define UARTDATA_UARTTXCSR_MASK                        0x00000200
+#define UARTDATA_UARTTXCSR_GET(x)              (((x) & UARTDATA_UARTTXCSR_MASK) >> UARTDATA_UARTTXCSR_LSB)
+#define UARTDATA_UARTTXCSR_SET(x)              (((0 | (x)) << UARTDATA_UARTTXCSR_LSB) & UARTDATA_UARTTXCSR_MASK)
+#define UARTDATA_UARTTXCSR_RESET               0
+#define UARTDATA_UARTRXCSR_MSB                 8
+#define UARTDATA_UARTRXCSR_LSB                 8
+#define UARTDATA_UARTRXCSR_MASK                        0x00000100
+#define UARTDATA_UARTRXCSR_GET(x)              (((x) & UARTDATA_UARTRXCSR_MASK) >> UARTDATA_UARTRXCSR_LSB)
+#define UARTDATA_UARTRXCSR_SET(x)              (((0 | (x)) << UARTDATA_UARTRXCSR_LSB) & UARTDATA_UARTRXCSR_MASK)
+#define UARTDATA_UARTRXCSR_RESET               0
+#define UARTDATA_UARTTXRXDATA_MSB              7
+#define UARTDATA_UARTTXRXDATA_LSB              0
+#define UARTDATA_UARTTXRXDATA_MASK             0x000000ff
+#define UARTDATA_UARTTXRXDATA_GET(x)           (((x) & UARTDATA_UARTTXRXDATA_MASK) >> UARTDATA_UARTTXRXDATA_LSB)
+#define UARTDATA_UARTTXRXDATA_SET(x)           (((0 | (x)) << UARTDATA_UARTTXRXDATA_LSB) & UARTDATA_UARTTXRXDATA_MASK)
+#define UARTDATA_UARTTXRXDATA_RESET            0
+#define UARTDATA_ADDRESS                       0x0000
+#define UARTDATA_HW_MASK                       0x000003ff
+#define UARTDATA_SW_MASK                       0x000003ff
+#define UARTDATA_RSTMASK                       0x000003ff
+#define UARTDATA_RESET                         0x00000000
+
+// 0x0004 (UARTCS)
+#define UARTCS_UARTRXBUSY_MSB                  15
+#define UARTCS_UARTRXBUSY_LSB                  15
+#define UARTCS_UARTRXBUSY_MASK                 0x00008000
+#define UARTCS_UARTRXBUSY_GET(x)               (((x) & UARTCS_UARTRXBUSY_MASK) >> UARTCS_UARTRXBUSY_LSB)
+#define UARTCS_UARTRXBUSY_SET(x)               (((0 | (x)) << UARTCS_UARTRXBUSY_LSB) & UARTCS_UARTRXBUSY_MASK)
+#define UARTCS_UARTRXBUSY_RESET                        0
+#define UARTCS_UARTTXBUSY_MSB                  14
+#define UARTCS_UARTTXBUSY_LSB                  14
+#define UARTCS_UARTTXBUSY_MASK                 0x00004000
+#define UARTCS_UARTTXBUSY_GET(x)               (((x) & UARTCS_UARTTXBUSY_MASK) >> UARTCS_UARTTXBUSY_LSB)
+#define UARTCS_UARTTXBUSY_SET(x)               (((0 | (x)) << UARTCS_UARTTXBUSY_LSB) & UARTCS_UARTTXBUSY_MASK)
+#define UARTCS_UARTTXBUSY_RESET                        0
+#define UARTCS_UARTHOSTINTEN_MSB               13
+#define UARTCS_UARTHOSTINTEN_LSB               13
+#define UARTCS_UARTHOSTINTEN_MASK              0x00002000
+#define UARTCS_UARTHOSTINTEN_GET(x)            (((x) & UARTCS_UARTHOSTINTEN_MASK) >> UARTCS_UARTHOSTINTEN_LSB)
+#define UARTCS_UARTHOSTINTEN_SET(x)            (((0 | (x)) << UARTCS_UARTHOSTINTEN_LSB) & UARTCS_UARTHOSTINTEN_MASK)
+#define UARTCS_UARTHOSTINTEN_RESET             0
+#define UARTCS_UARTHOSTINT_MSB                 12
+#define UARTCS_UARTHOSTINT_LSB                 12
+#define UARTCS_UARTHOSTINT_MASK                        0x00001000
+#define UARTCS_UARTHOSTINT_GET(x)              (((x) & UARTCS_UARTHOSTINT_MASK) >> UARTCS_UARTHOSTINT_LSB)
+#define UARTCS_UARTHOSTINT_SET(x)              (((0 | (x)) << UARTCS_UARTHOSTINT_LSB) & UARTCS_UARTHOSTINT_MASK)
+#define UARTCS_UARTHOSTINT_RESET               0
+#define UARTCS_UARTTXBREAK_MSB                 11
+#define UARTCS_UARTTXBREAK_LSB                 11
+#define UARTCS_UARTTXBREAK_MASK                        0x00000800
+#define UARTCS_UARTTXBREAK_GET(x)              (((x) & UARTCS_UARTTXBREAK_MASK) >> UARTCS_UARTTXBREAK_LSB)
+#define UARTCS_UARTTXBREAK_SET(x)              (((0 | (x)) << UARTCS_UARTTXBREAK_LSB) & UARTCS_UARTTXBREAK_MASK)
+#define UARTCS_UARTTXBREAK_RESET               0
+#define UARTCS_UARTRXBREAK_MSB                 10
+#define UARTCS_UARTRXBREAK_LSB                 10
+#define UARTCS_UARTRXBREAK_MASK                        0x00000400
+#define UARTCS_UARTRXBREAK_GET(x)              (((x) & UARTCS_UARTRXBREAK_MASK) >> UARTCS_UARTRXBREAK_LSB)
+#define UARTCS_UARTRXBREAK_SET(x)              (((0 | (x)) << UARTCS_UARTRXBREAK_LSB) & UARTCS_UARTRXBREAK_MASK)
+#define UARTCS_UARTRXBREAK_RESET               0
+#define UARTCS_UARTSERIATXREADY_MSB            9
+#define UARTCS_UARTSERIATXREADY_LSB            9
+#define UARTCS_UARTSERIATXREADY_MASK           0x00000200
+#define UARTCS_UARTSERIATXREADY_GET(x)         (((x) & UARTCS_UARTSERIATXREADY_MASK) >> UARTCS_UARTSERIATXREADY_LSB)
+#define UARTCS_UARTSERIATXREADY_SET(x)         (((0 | (x)) << UARTCS_UARTSERIATXREADY_LSB) & UARTCS_UARTSERIATXREADY_MASK)
+#define UARTCS_UARTSERIATXREADY_RESET          0
+#define UARTCS_UARTTXREADYORIDE_MSB            8
+#define UARTCS_UARTTXREADYORIDE_LSB            8
+#define UARTCS_UARTTXREADYORIDE_MASK           0x00000100
+#define UARTCS_UARTTXREADYORIDE_GET(x)         (((x) & UARTCS_UARTTXREADYORIDE_MASK) >> UARTCS_UARTTXREADYORIDE_LSB)
+#define UARTCS_UARTTXREADYORIDE_SET(x)         (((0 | (x)) << UARTCS_UARTTXREADYORIDE_LSB) & UARTCS_UARTTXREADYORIDE_MASK)
+#define UARTCS_UARTTXREADYORIDE_RESET          0
+#define UARTCS_UARTRXREADYORIDE_MSB            7
+#define UARTCS_UARTRXREADYORIDE_LSB            7
+#define UARTCS_UARTRXREADYORIDE_MASK           0x00000080
+#define UARTCS_UARTRXREADYORIDE_GET(x)         (((x) & UARTCS_UARTRXREADYORIDE_MASK) >> UARTCS_UARTRXREADYORIDE_LSB)
+#define UARTCS_UARTRXREADYORIDE_SET(x)         (((0 | (x)) << UARTCS_UARTRXREADYORIDE_LSB) & UARTCS_UARTRXREADYORIDE_MASK)
+#define UARTCS_UARTRXREADYORIDE_RESET          0
+#define UARTCS_UARTDMAEN_MSB                   6
+#define UARTCS_UARTDMAEN_LSB                   6
+#define UARTCS_UARTDMAEN_MASK                  0x00000040
+#define UARTCS_UARTDMAEN_GET(x)                        (((x) & UARTCS_UARTDMAEN_MASK) >> UARTCS_UARTDMAEN_LSB)
+#define UARTCS_UARTDMAEN_SET(x)                        (((0 | (x)) << UARTCS_UARTDMAEN_LSB) & UARTCS_UARTDMAEN_MASK)
+#define UARTCS_UARTDMAEN_RESET                 0
+#define UARTCS_UARTFLOWCONTROLMODE_MSB         5
+#define UARTCS_UARTFLOWCONTROLMODE_LSB         4
+#define UARTCS_UARTFLOWCONTROLMODE_MASK                0x00000030
+#define UARTCS_UARTFLOWCONTROLMODE_GET(x)      (((x) & UARTCS_UARTFLOWCONTROLMODE_MASK) >> UARTCS_UARTFLOWCONTROLMODE_LSB)
+#define UARTCS_UARTFLOWCONTROLMODE_SET(x)      (((0 | (x)) << UARTCS_UARTFLOWCONTROLMODE_LSB) & UARTCS_UARTFLOWCONTROLMODE_MASK)
+#define UARTCS_UARTFLOWCONTROLMODE_RESET       0
+#define UARTCS_UARTINTERFACEMODE_MSB           3
+#define UARTCS_UARTINTERFACEMODE_LSB           2
+#define UARTCS_UARTINTERFACEMODE_MASK          0x0000000c
+#define UARTCS_UARTINTERFACEMODE_GET(x)                (((x) & UARTCS_UARTINTERFACEMODE_MASK) >> UARTCS_UARTINTERFACEMODE_LSB)
+#define UARTCS_UARTINTERFACEMODE_SET(x)                (((0 | (x)) << UARTCS_UARTINTERFACEMODE_LSB) & UARTCS_UARTINTERFACEMODE_MASK)
+#define UARTCS_UARTINTERFACEMODE_RESET         0
+#define UARTCS_UARTPARITYMODE_MSB              1
+#define UARTCS_UARTPARITYMODE_LSB              0
+#define UARTCS_UARTPARITYMODE_MASK             0x00000003
+#define UARTCS_UARTPARITYMODE_GET(x)           (((x) & UARTCS_UARTPARITYMODE_MASK) >> UARTCS_UARTPARITYMODE_LSB)
+#define UARTCS_UARTPARITYMODE_SET(x)           (((0 | (x)) << UARTCS_UARTPARITYMODE_LSB) & UARTCS_UARTPARITYMODE_MASK)
+#define UARTCS_UARTPARITYMODE_RESET            0
+#define UARTCS_ADDRESS                         0x0004
+#define UARTCS_HW_MASK                         0x0000ffff
+#define UARTCS_SW_MASK                         0x0000ffff
+#define UARTCS_RSTMASK                         0x000029ff
+#define UARTCS_RESET                           0x00000000
+
+// 0x0008 (UARTCLOCK)
+#define UARTCLOCK_UARTCLOCKSCALE_MSB           23
+#define UARTCLOCK_UARTCLOCKSCALE_LSB           16
+#define UARTCLOCK_UARTCLOCKSCALE_MASK          0x00ff0000
+#define UARTCLOCK_UARTCLOCKSCALE_GET(x)                (((x) & UARTCLOCK_UARTCLOCKSCALE_MASK) >> UARTCLOCK_UARTCLOCKSCALE_LSB)
+#define UARTCLOCK_UARTCLOCKSCALE_SET(x)                (((0 | (x)) << UARTCLOCK_UARTCLOCKSCALE_LSB) & UARTCLOCK_UARTCLOCKSCALE_MASK)
+#define UARTCLOCK_UARTCLOCKSCALE_RESET         0
+#define UARTCLOCK_UARTCLOCKSTEP_MSB            15
+#define UARTCLOCK_UARTCLOCKSTEP_LSB            0
+#define UARTCLOCK_UARTCLOCKSTEP_MASK           0x0000ffff
+#define UARTCLOCK_UARTCLOCKSTEP_GET(x)         (((x) & UARTCLOCK_UARTCLOCKSTEP_MASK) >> UARTCLOCK_UARTCLOCKSTEP_LSB)
+#define UARTCLOCK_UARTCLOCKSTEP_SET(x)         (((0 | (x)) << UARTCLOCK_UARTCLOCKSTEP_LSB) & UARTCLOCK_UARTCLOCKSTEP_MASK)
+#define UARTCLOCK_UARTCLOCKSTEP_RESET          0
+#define UARTCLOCK_ADDRESS                      0x0008
+#define UARTCLOCK_HW_MASK                      0x00ffffff
+#define UARTCLOCK_SW_MASK                      0x00ffffff
+#define UARTCLOCK_RSTMASK                      0x00ffffff
+#define UARTCLOCK_RESET                                0x00000000
+
+// 0x000c (UARTINT)
+#define UARTINT_UARTTXEMPTYINT_MSB             9
+#define UARTINT_UARTTXEMPTYINT_LSB             9
+#define UARTINT_UARTTXEMPTYINT_MASK            0x00000200
+#define UARTINT_UARTTXEMPTYINT_GET(x)          (((x) & UARTINT_UARTTXEMPTYINT_MASK) >> UARTINT_UARTTXEMPTYINT_LSB)
+#define UARTINT_UARTTXEMPTYINT_SET(x)          (((0 | (x)) << UARTINT_UARTTXEMPTYINT_LSB) & UARTINT_UARTTXEMPTYINT_MASK)
+#define UARTINT_UARTTXEMPTYINT_RESET           0
+#define UARTINT_UARTRXFULLINT_MSB              8
+#define UARTINT_UARTRXFULLINT_LSB              8
+#define UARTINT_UARTRXFULLINT_MASK             0x00000100
+#define UARTINT_UARTRXFULLINT_GET(x)           (((x) & UARTINT_UARTRXFULLINT_MASK) >> UARTINT_UARTRXFULLINT_LSB)
+#define UARTINT_UARTRXFULLINT_SET(x)           (((0 | (x)) << UARTINT_UARTRXFULLINT_LSB) & UARTINT_UARTRXFULLINT_MASK)
+#define UARTINT_UARTRXFULLINT_RESET            0
+#define UARTINT_UARTRXBREAKOFFINT_MSB          7
+#define UARTINT_UARTRXBREAKOFFINT_LSB          7
+#define UARTINT_UARTRXBREAKOFFINT_MASK         0x00000080
+#define UARTINT_UARTRXBREAKOFFINT_GET(x)       (((x) & UARTINT_UARTRXBREAKOFFINT_MASK) >> UARTINT_UARTRXBREAKOFFINT_LSB)
+#define UARTINT_UARTRXBREAKOFFINT_SET(x)       (((0 | (x)) << UARTINT_UARTRXBREAKOFFINT_LSB) & UARTINT_UARTRXBREAKOFFINT_MASK)
+#define UARTINT_UARTRXBREAKOFFINT_RESET                0
+#define UARTINT_UARTRXBREAKONINT_MSB           6
+#define UARTINT_UARTRXBREAKONINT_LSB           6
+#define UARTINT_UARTRXBREAKONINT_MASK          0x00000040
+#define UARTINT_UARTRXBREAKONINT_GET(x)                (((x) & UARTINT_UARTRXBREAKONINT_MASK) >> UARTINT_UARTRXBREAKONINT_LSB)
+#define UARTINT_UARTRXBREAKONINT_SET(x)                (((0 | (x)) << UARTINT_UARTRXBREAKONINT_LSB) & UARTINT_UARTRXBREAKONINT_MASK)
+#define UARTINT_UARTRXBREAKONINT_RESET         0
+#define UARTINT_UARTRXPARITYERRINT_MSB         5
+#define UARTINT_UARTRXPARITYERRINT_LSB         5
+#define UARTINT_UARTRXPARITYERRINT_MASK                0x00000020
+#define UARTINT_UARTRXPARITYERRINT_GET(x)      (((x) & UARTINT_UARTRXPARITYERRINT_MASK) >> UARTINT_UARTRXPARITYERRINT_LSB)
+#define UARTINT_UARTRXPARITYERRINT_SET(x)      (((0 | (x)) << UARTINT_UARTRXPARITYERRINT_LSB) & UARTINT_UARTRXPARITYERRINT_MASK)
+#define UARTINT_UARTRXPARITYERRINT_RESET       0
+#define UARTINT_UARTTXOFLOWERRINT_MSB          4
+#define UARTINT_UARTTXOFLOWERRINT_LSB          4
+#define UARTINT_UARTTXOFLOWERRINT_MASK         0x00000010
+#define UARTINT_UARTTXOFLOWERRINT_GET(x)       (((x) & UARTINT_UARTTXOFLOWERRINT_MASK) >> UARTINT_UARTTXOFLOWERRINT_LSB)
+#define UARTINT_UARTTXOFLOWERRINT_SET(x)       (((0 | (x)) << UARTINT_UARTTXOFLOWERRINT_LSB) & UARTINT_UARTTXOFLOWERRINT_MASK)
+#define UARTINT_UARTTXOFLOWERRINT_RESET                0
+#define UARTINT_UARTRXOFLOWERRINT_MSB          3
+#define UARTINT_UARTRXOFLOWERRINT_LSB          3
+#define UARTINT_UARTRXOFLOWERRINT_MASK         0x00000008
+#define UARTINT_UARTRXOFLOWERRINT_GET(x)       (((x) & UARTINT_UARTRXOFLOWERRINT_MASK) >> UARTINT_UARTRXOFLOWERRINT_LSB)
+#define UARTINT_UARTRXOFLOWERRINT_SET(x)       (((0 | (x)) << UARTINT_UARTRXOFLOWERRINT_LSB) & UARTINT_UARTRXOFLOWERRINT_MASK)
+#define UARTINT_UARTRXOFLOWERRINT_RESET                0
+#define UARTINT_UARTRXFRAMINGERRINT_MSB                2
+#define UARTINT_UARTRXFRAMINGERRINT_LSB                2
+#define UARTINT_UARTRXFRAMINGERRINT_MASK       0x00000004
+#define UARTINT_UARTRXFRAMINGERRINT_GET(x)     (((x) & UARTINT_UARTRXFRAMINGERRINT_MASK) >> UARTINT_UARTRXFRAMINGERRINT_LSB)
+#define UARTINT_UARTRXFRAMINGERRINT_SET(x)     (((0 | (x)) << UARTINT_UARTRXFRAMINGERRINT_LSB) & UARTINT_UARTRXFRAMINGERRINT_MASK)
+#define UARTINT_UARTRXFRAMINGERRINT_RESET      0
+#define UARTINT_UARTTXREADYINT_MSB             1
+#define UARTINT_UARTTXREADYINT_LSB             1
+#define UARTINT_UARTTXREADYINT_MASK            0x00000002
+#define UARTINT_UARTTXREADYINT_GET(x)          (((x) & UARTINT_UARTTXREADYINT_MASK) >> UARTINT_UARTTXREADYINT_LSB)
+#define UARTINT_UARTTXREADYINT_SET(x)          (((0 | (x)) << UARTINT_UARTTXREADYINT_LSB) & UARTINT_UARTTXREADYINT_MASK)
+#define UARTINT_UARTTXREADYINT_RESET           0
+#define UARTINT_UARTRXVALIDINT_MSB             0
+#define UARTINT_UARTRXVALIDINT_LSB             0
+#define UARTINT_UARTRXVALIDINT_MASK            0x00000001
+#define UARTINT_UARTRXVALIDINT_GET(x)          (((x) & UARTINT_UARTRXVALIDINT_MASK) >> UARTINT_UARTRXVALIDINT_LSB)
+#define UARTINT_UARTRXVALIDINT_SET(x)          (((0 | (x)) << UARTINT_UARTRXVALIDINT_LSB) & UARTINT_UARTRXVALIDINT_MASK)
+#define UARTINT_UARTRXVALIDINT_RESET           0
+#define UARTINT_ADDRESS                                0x000c
+#define UARTINT_HW_MASK                                0x000003ff
+#define UARTINT_SW_MASK                                0x000003ff
+#define UARTINT_RSTMASK                                0x000003ff
+#define UARTINT_RESET                          0x00000000
+
+// 0x0010 (UARTINTEN)
+#define UARTINTEN_UARTTXEMPTYINTEN_MSB         9
+#define UARTINTEN_UARTTXEMPTYINTEN_LSB         9
+#define UARTINTEN_UARTTXEMPTYINTEN_MASK                0x00000200
+#define UARTINTEN_UARTTXEMPTYINTEN_GET(x)      (((x) & UARTINTEN_UARTTXEMPTYINTEN_MASK) >> UARTINTEN_UARTTXEMPTYINTEN_LSB)
+#define UARTINTEN_UARTTXEMPTYINTEN_SET(x)      (((0 | (x)) << UARTINTEN_UARTTXEMPTYINTEN_LSB) & UARTINTEN_UARTTXEMPTYINTEN_MASK)
+#define UARTINTEN_UARTTXEMPTYINTEN_RESET       0
+#define UARTINTEN_UARTRXFULLINTEN_MSB          8
+#define UARTINTEN_UARTRXFULLINTEN_LSB          8
+#define UARTINTEN_UARTRXFULLINTEN_MASK         0x00000100
+#define UARTINTEN_UARTRXFULLINTEN_GET(x)       (((x) & UARTINTEN_UARTRXFULLINTEN_MASK) >> UARTINTEN_UARTRXFULLINTEN_LSB)
+#define UARTINTEN_UARTRXFULLINTEN_SET(x)       (((0 | (x)) << UARTINTEN_UARTRXFULLINTEN_LSB) & UARTINTEN_UARTRXFULLINTEN_MASK)
+#define UARTINTEN_UARTRXFULLINTEN_RESET                0
+#define UARTINTEN_UARTRXBREAKOFFINTEN_MSB      7
+#define UARTINTEN_UARTRXBREAKOFFINTEN_LSB      7
+#define UARTINTEN_UARTRXBREAKOFFINTEN_MASK     0x00000080
+#define UARTINTEN_UARTRXBREAKOFFINTEN_GET(x)   (((x) & UARTINTEN_UARTRXBREAKOFFINTEN_MASK) >> UARTINTEN_UARTRXBREAKOFFINTEN_LSB)
+#define UARTINTEN_UARTRXBREAKOFFINTEN_SET(x)   (((0 | (x)) << UARTINTEN_UARTRXBREAKOFFINTEN_LSB) & UARTINTEN_UARTRXBREAKOFFINTEN_MASK)
+#define UARTINTEN_UARTRXBREAKOFFINTEN_RESET    0
+#define UARTINTEN_UARTRXBREAKONINTEN_MSB       6
+#define UARTINTEN_UARTRXBREAKONINTEN_LSB       6
+#define UARTINTEN_UARTRXBREAKONINTEN_MASK      0x00000040
+#define UARTINTEN_UARTRXBREAKONINTEN_GET(x)    (((x) & UARTINTEN_UARTRXBREAKONINTEN_MASK) >> UARTINTEN_UARTRXBREAKONINTEN_LSB)
+#define UARTINTEN_UARTRXBREAKONINTEN_SET(x)    (((0 | (x)) << UARTINTEN_UARTRXBREAKONINTEN_LSB) & UARTINTEN_UARTRXBREAKONINTEN_MASK)
+#define UARTINTEN_UARTRXBREAKONINTEN_RESET     0
+#define UARTINTEN_UARTRXPARITYERRINTEN_MSB     5
+#define UARTINTEN_UARTRXPARITYERRINTEN_LSB     5
+#define UARTINTEN_UARTRXPARITYERRINTEN_MASK    0x00000020
+#define UARTINTEN_UARTRXPARITYERRINTEN_GET(x)  (((x) & UARTINTEN_UARTRXPARITYERRINTEN_MASK) >> UARTINTEN_UARTRXPARITYERRINTEN_LSB)
+#define UARTINTEN_UARTRXPARITYERRINTEN_SET(x)  (((0 | (x)) << UARTINTEN_UARTRXPARITYERRINTEN_LSB) & UARTINTEN_UARTRXPARITYERRINTEN_MASK)
+#define UARTINTEN_UARTRXPARITYERRINTEN_RESET   0
+#define UARTINTEN_UARTTXOFLOWERRINTEN_MSB      4
+#define UARTINTEN_UARTTXOFLOWERRINTEN_LSB      4
+#define UARTINTEN_UARTTXOFLOWERRINTEN_MASK     0x00000010
+#define UARTINTEN_UARTTXOFLOWERRINTEN_GET(x)   (((x) & UARTINTEN_UARTTXOFLOWERRINTEN_MASK) >> UARTINTEN_UARTTXOFLOWERRINTEN_LSB)
+#define UARTINTEN_UARTTXOFLOWERRINTEN_SET(x)   (((0 | (x)) << UARTINTEN_UARTTXOFLOWERRINTEN_LSB) & UARTINTEN_UARTTXOFLOWERRINTEN_MASK)
+#define UARTINTEN_UARTTXOFLOWERRINTEN_RESET    0
+#define UARTINTEN_UARTRXOFLOWERRINTEN_MSB      3
+#define UARTINTEN_UARTRXOFLOWERRINTEN_LSB      3
+#define UARTINTEN_UARTRXOFLOWERRINTEN_MASK     0x00000008
+#define UARTINTEN_UARTRXOFLOWERRINTEN_GET(x)   (((x) & UARTINTEN_UARTRXOFLOWERRINTEN_MASK) >> UARTINTEN_UARTRXOFLOWERRINTEN_LSB)
+#define UARTINTEN_UARTRXOFLOWERRINTEN_SET(x)   (((0 | (x)) << UARTINTEN_UARTRXOFLOWERRINTEN_LSB) & UARTINTEN_UARTRXOFLOWERRINTEN_MASK)
+#define UARTINTEN_UARTRXOFLOWERRINTEN_RESET    0
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_MSB    2
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_LSB    2
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_MASK   0x00000004
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_GET(x) (((x) & UARTINTEN_UARTRXFRAMINGERRINTEN_MASK) >> UARTINTEN_UARTRXFRAMINGERRINTEN_LSB)
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_SET(x) (((0 | (x)) << UARTINTEN_UARTRXFRAMINGERRINTEN_LSB) & UARTINTEN_UARTRXFRAMINGERRINTEN_MASK)
+#define UARTINTEN_UARTRXFRAMINGERRINTEN_RESET  0
+#define UARTINTEN_UARTTXREADYINTEN_MSB         1
+#define UARTINTEN_UARTTXREADYINTEN_LSB         1
+#define UARTINTEN_UARTTXREADYINTEN_MASK                0x00000002
+#define UARTINTEN_UARTTXREADYINTEN_GET(x)      (((x) & UARTINTEN_UARTTXREADYINTEN_MASK) >> UARTINTEN_UARTTXREADYINTEN_LSB)
+#define UARTINTEN_UARTTXREADYINTEN_SET(x)      (((0 | (x)) << UARTINTEN_UARTTXREADYINTEN_LSB) & UARTINTEN_UARTTXREADYINTEN_MASK)
+#define UARTINTEN_UARTTXREADYINTEN_RESET       0
+#define UARTINTEN_UARTRXVALIDINTEN_MSB         0
+#define UARTINTEN_UARTRXVALIDINTEN_LSB         0
+#define UARTINTEN_UARTRXVALIDINTEN_MASK                0x00000001
+#define UARTINTEN_UARTRXVALIDINTEN_GET(x)      (((x) & UARTINTEN_UARTRXVALIDINTEN_MASK) >> UARTINTEN_UARTRXVALIDINTEN_LSB)
+#define UARTINTEN_UARTRXVALIDINTEN_SET(x)      (((0 | (x)) << UARTINTEN_UARTRXVALIDINTEN_LSB) & UARTINTEN_UARTRXVALIDINTEN_MASK)
+#define UARTINTEN_UARTRXVALIDINTEN_RESET       0
+#define UARTINTEN_ADDRESS                      0x0010
+#define UARTINTEN_HW_MASK                      0x000003ff
+#define UARTINTEN_SW_MASK                      0x000003ff
+#define UARTINTEN_RSTMASK                      0x000003ff
+#define UARTINTEN_RESET                                0x00000000
+
+/*
+ * uncomment below to enable WAR for EV81847.
+ */
+//#define AR933X_EV81847_WAR
+
+static struct uart_driver ar933x_uart_driver;
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...)     printk(fmt)
+#else
+#define DEBUG_INTR(fmt...)     do { } while (0)
+#endif
+
+/*
+ * We default to IRQ0 for the "no irq" hack.   Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#include <asm/serial.h>
+
+struct ar933x_uart_port {
+       struct uart_port        port;
+       struct timer_list       timer;          /* "no irq" timer */
+       unsigned char           acr;
+       unsigned char           ier;
+       unsigned char           lcr;
+       unsigned char           mcr;
+};
+
+static inline int ar933x_ev81847_war(void)
+{
+#if defined(AR933X_EV81847_WAR)
+       return 1;
+#else
+       return 0;
+#endif
+}
+
+static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
+                                           int offset)
+{
+       return readl(up->port.membase + offset);
+}
+
+static inline void ar933x_uart_write(struct ar933x_uart_port *up,
+                                    int offset, unsigned int value)
+{
+       writel(value, up->port.membase + offset);
+}
+
+static inline void ar933x_uart_rmw(struct ar933x_uart_port *up,
+                                 unsigned int offset,
+                                 unsigned int mask,
+                                 unsigned int val)
+{
+       unsigned int t;
+
+       t = ar933x_uart_read(up, offset);
+       t &= ~mask;
+       t |= val;
+       ar933x_uart_write(up, offset, t);
+}
+
+static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up,
+                                      unsigned int offset,
+                                      unsigned int val)
+{
+       ar933x_uart_rmw(up, offset, 0, val);
+}
+
+static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up,
+                                        unsigned int offset,
+                                        unsigned int val)
+{
+       ar933x_uart_rmw(up, offset, val, 0);
+}
+
+static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
+{
+       ar933x_uart_rmw_set(up, UARTINTEN_ADDRESS,
+                           UARTINTEN_UARTTXEMPTYINTEN_SET(1));
+}
+
+static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
+{
+       if (up->ier & UART_IER_THRI) {
+               up->ier &= ~UART_IER_THRI;
+
+               /* FIXME: why this uses RXVALIDINTEN? */
+               ar933x_uart_rmw_clear(up, UARTINTEN_ADDRESS,
+                                     UARTINTEN_UARTRXVALIDINTEN_SET(1));
+       }
+}
+
+static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned long flags;
+       unsigned int rdata;
+
+       spin_lock_irqsave(&up->port.lock, flags);
+       rdata = ar933x_uart_read(up, UARTDATA_ADDRESS);
+       spin_unlock_irqrestore(&up->port.lock, flags);
+
+       return (rdata & UARTDATA_UARTTXCSR_MASK) ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
+{
+       return TIOCM_CAR;
+}
+
+static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void ar933x_uart_start_tx(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+       ar933x_uart_start_tx_interrupt(up);
+}
+
+static void ar933x_uart_stop_tx(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+       ar933x_uart_stop_tx_interrupt(up);
+}
+
+static void ar933x_uart_stop_rx(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+       up->ier &= ~UART_IER_RLSI;
+       up->port.read_status_mask &= ~UART_LSR_DR;
+
+       ar933x_uart_rmw_clear(up, UARTINTEN_ADDRESS,
+                             UARTINTEN_UARTRXVALIDINTEN_SET(1));
+}
+
+static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned long flags;
+       unsigned long rdata;
+
+       spin_lock_irqsave(&up->port.lock, flags);
+
+       if (break_state == -1)
+               up->lcr |= UART_LCR_SBC;
+       else
+               up->lcr &= ~UART_LCR_SBC;
+
+       rdata = ar933x_uart_read(up, UARTCS_ADDRESS);
+       if (up->lcr & UART_LCR_SBC)
+               rdata |= UARTCS_UARTTXBREAK_SET(1);
+       else
+               rdata &= ~UARTCS_UARTTXBREAK_SET(1);
+
+       ar933x_uart_write(up, UARTCS_ADDRESS, rdata);
+
+       spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void ar933x_uart_enable_ms(struct uart_port *port)
+{
+}
+
+static inline unsigned int ar933x_uart_get_divisor(struct uart_port *port,
+                                                  unsigned int baud)
+{
+       return (port->uartclk / (16 * baud)) - 1;
+}
+
+static void ar933x_uart_set_termios(struct uart_port *port,
+                                   struct ktermios *termios,
+                                   struct ktermios *old)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned char cval;
+       unsigned long flags;
+       unsigned int baud, quot;
+
+       switch (termios->c_cflag & CSIZE) {
+       case CS5:
+               cval = UART_LCR_WLEN5;
+               break;
+       case CS6:
+               cval = UART_LCR_WLEN6;
+               break;
+       case CS7:
+               cval = UART_LCR_WLEN7;
+               break;
+       default:
+       case CS8:
+               cval = UART_LCR_WLEN8;
+               break;
+       }
+
+       if (termios->c_cflag & CSTOPB)
+               cval |= UART_LCR_STOP;
+       if (termios->c_cflag & PARENB)
+               cval |= UART_LCR_PARITY;
+       if (!(termios->c_cflag & PARODD))
+               cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+       if (termios->c_cflag & CMSPAR)
+               cval |= UART_LCR_SPAR;
+#endif
+
+       /*
+        * Ask the core to calculate the divisor for us.
+        */
+       baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+       quot = ar933x_uart_get_divisor(port, baud);
+
+#if 0
+       if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+               if (baud < 2400)
+                       fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+               else
+                       fcr = uart_config[up->port.type].fcr;
+       }
+
+       /*
+        * MCR-based auto flow control.  When AFE is enabled, RTS will be
+        * deasserted when the receive FIFO contains more characters than
+        * the trigger, or the MCR RTS bit is cleared.  In the case where
+        * the remote UART is not using CTS auto flow control, we must
+        * have sufficient FIFO entries for the latency of the remote
+        * UART to respond.  IOW, at least 32 bytes of FIFO.
+        */
+       if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
+               up->mcr &= ~UART_MCR_AFE;
+               if (termios->c_cflag & CRTSCTS)
+                       up->mcr |= UART_MCR_AFE;
+       }
+#endif
+
+       /*
+        * Ok, we're now changing the port state.  Do it with
+        * interrupts disabled.
+        */
+       spin_lock_irqsave(&up->port.lock, flags);
+
+       /*
+        * Update the per-port timeout.
+        */
+       uart_update_timeout(port, termios->c_cflag, baud);
+
+       up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+       if (termios->c_iflag & INPCK)
+               up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+       if (termios->c_iflag & (BRKINT | PARMRK))
+               up->port.read_status_mask |= UART_LSR_BI;
+
+       /*
+        * Characteres to ignore
+        */
+       up->port.ignore_status_mask = 0;
+       if (termios->c_iflag & IGNPAR)
+               up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+       if (termios->c_iflag & IGNBRK) {
+               up->port.ignore_status_mask |= UART_LSR_BI;
+               /*
+                * If we're ignoring parity and break indicators,
+                * ignore overruns too (for real raw support).
+                */
+               if (termios->c_iflag & IGNPAR)
+                       up->port.ignore_status_mask |= UART_LSR_OE;
+       }
+
+       /*
+        * ignore all characters if CREAD is not set
+        */
+       if ((termios->c_cflag & CREAD) == 0)
+               up->port.ignore_status_mask |= UART_LSR_DR;
+
+       /*
+        * CTS flow control flag and modem status interrupts
+        */
+       up->ier &= ~UART_IER_MSI;
+       if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+               up->ier |= UART_IER_MSI;
+
+       ar933x_uart_rmw_set(up, UARTCS_ADDRESS,
+                           UARTCS_UARTHOSTINTEN_SET(1));
+
+       /* Save LCR */
+       up->lcr = cval;
+
+       ar933x_uart_set_mctrl(&up->port, up->port.mctrl);
+       spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void ar933x_uart_rx_chars(struct ar933x_uart_port *up, int *status)
+{
+       struct tty_struct *tty = up->port.state->port.tty;
+       unsigned int lsr = *status;
+       unsigned char ch;
+       int max_count = 256;
+       char flag;
+
+       do {
+               ch = (unsigned char)UARTDATA_UARTTXRXDATA_GET(lsr);
+
+               flag = TTY_NORMAL;
+               up->port.icount.rx++;
+
+               lsr = UARTDATA_UARTRXCSR_SET(1);
+               ar933x_uart_write(up, UARTDATA_ADDRESS, lsr);
+
+               if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+                                   UART_LSR_FE | UART_LSR_OE))) {
+                       /*
+                        * For statistics only
+                        */
+                       if (lsr & UART_LSR_BI) {
+                               lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+                               up->port.icount.brk++;
+                               /*
+                                * We do the SysRQ and SAK checking
+                                * here because otherwise the break
+                                * may get masked by ignore_status_mask
+                                * or read_status_mask.
+                                */
+                               if (uart_handle_break(&up->port))
+                                       goto ignore_char;
+                       } else if (lsr & UART_LSR_PE)
+                               up->port.icount.parity++;
+                       else if (lsr & UART_LSR_FE)
+                               up->port.icount.frame++;
+                       if (lsr & UART_LSR_OE)
+                               up->port.icount.overrun++;
+
+                       /*
+                        * Mask off conditions which should be ignored.
+                        */
+                       lsr &= up->port.read_status_mask;
+
+                       if (lsr & UART_LSR_BI) {
+                               DEBUG_INTR("handling break....");
+                               flag = TTY_BREAK;
+                       } else if (lsr & UART_LSR_PE)
+                               flag = TTY_PARITY;
+                       else if (lsr & UART_LSR_FE)
+                               flag = TTY_FRAME;
+               }
+
+               if (uart_handle_sysrq_char(&up->port, ch))
+                       goto ignore_char;
+
+               uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
+ignore_char:
+               lsr = ar933x_uart_read(up, UARTDATA_ADDRESS);
+       } while ((lsr & UARTDATA_UARTRXCSR_MASK) && (max_count-- > 0));
+
+       spin_unlock(&up->port.lock);
+       tty_flip_buffer_push(tty);
+       spin_lock(&up->port.lock);
+
+       *status = lsr;
+}
+
+static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
+{
+       struct circ_buf *xmit = &up->port.state->xmit;
+       int count;
+       unsigned int rdata;
+
+       rdata = ar933x_uart_read(up, UARTDATA_ADDRESS);
+       if (UARTDATA_UARTTXCSR_GET(rdata) == 0) {
+               ar933x_uart_start_tx_interrupt(up);
+               return;
+       }
+
+       if (up->port.x_char) {
+               rdata = UARTDATA_UARTTXRXDATA_SET((unsigned int)(up->port.x_char));
+               rdata |= UARTDATA_UARTTXCSR_SET(1);
+               ar933x_uart_write(up, UARTDATA_ADDRESS, rdata);
+               up->port.icount.tx++;
+               up->port.x_char = 0;
+               ar933x_uart_start_tx_interrupt(up);
+               return;
+       }
+
+       if (uart_tx_stopped(&up->port)) {
+               ar933x_uart_stop_tx(&up->port);
+               return;
+       }
+
+       if (uart_circ_empty(xmit)) {
+               ar933x_uart_stop_tx_interrupt(up);
+               return;
+       }
+
+       count = up->port.fifosize / 4;
+       do {
+               rdata = ar933x_uart_read(up, UARTDATA_ADDRESS);
+               if (UARTDATA_UARTTXCSR_GET(rdata) == 0) {
+                       ar933x_uart_start_tx_interrupt(up);
+                       return;
+               }
+
+               rdata = UARTDATA_UARTTXRXDATA_SET((unsigned int)(xmit->buf[xmit->tail]));
+               rdata |= UARTDATA_UARTTXCSR_SET(1);
+               ar933x_uart_write(up, UARTDATA_ADDRESS, rdata);
+
+               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               up->port.icount.tx++;
+               if (uart_circ_empty(xmit))
+                       break;
+       } while (--count > 0);
+
+       rdata = ar933x_uart_read(up, UARTDATA_ADDRESS);
+       if (UARTDATA_UARTTXCSR_GET(rdata) == 0) {
+               ar933x_uart_start_tx_interrupt(up);
+               return;
+       }
+
+       /* Re-enable TX Empty Interrupt to transmit pending chars */
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+               uart_write_wakeup(&up->port);
+               ar933x_uart_start_tx_interrupt(up);
+       }
+
+       DEBUG_INTR("THRE...");
+
+       if (uart_circ_empty(xmit))
+               ar933x_uart_stop_tx_interrupt(up);
+       else
+               ar933x_uart_start_tx_interrupt(up);
+}
+
+/*! Hornet's interrupt status is not read clear, so that we have to...
+ * a. read out the interrupt status
+ * b. clear the interrupt mask to reset the interrupt status
+ * c. enable the interrupt to reactivate interrupt
+ *
+ * Disable and clear the interrupt status
+ */
+static inline void ar933x_uart_clear_int(struct ar933x_uart_port *up)
+{
+#define BIT3 (0x1>>3)
+
+       /* 1. clear MISC interrupt mask */
+       //ar7240_reg_rmw_clear(AR7240_MISC_INT_MASK, BIT3);
+
+       /* 2. clear uartcs hostinten mask, bit13 */
+       ar933x_uart_rmw_clear(up, UARTCS_ADDRESS,
+                             UARTCS_UARTHOSTINTEN_SET(1));
+
+       /* 3. clear rx uartint */
+       ar933x_uart_write(up, UARTINT_ADDRESS, UARTINT_UARTRXVALIDINT_SET(1));
+
+       /* 4. clear misc interrupt status  */
+       ar7240_reg_rmw_clear(AR7240_MISC_INT_STATUS, BIT3);
+
+       /* 5. clear rx uartinten*/
+       ar933x_uart_rmw_clear(up, UARTINTEN_ADDRESS,
+                             UARTINTEN_UARTRXVALIDINTEN_SET(1));
+
+       /* 6. enable rx int*/
+       ar933x_uart_rmw_set(up, UARTINTEN_ADDRESS,
+                           UARTINTEN_UARTRXVALIDINTEN_SET(1));
+
+       /* 7. set uartcs hostinten mask */
+       ar933x_uart_rmw_set(up, UARTCS_ADDRESS,
+                           UARTCS_UARTHOSTINTEN_SET(1));
+
+       /* 8. set misc int mask */
+       //ar7240_reg_wr(AR7240_MISC_INT_MASK, BIT3);
+}
+
+static inline void ar933x_uart_handle_port(struct ar933x_uart_port *up)
+{
+       unsigned int status;
+       unsigned int int_status;
+       unsigned int en_status;
+       unsigned long flags;
+
+       status = ar933x_uart_read(up, UARTDATA_ADDRESS);
+       int_status = ar933x_uart_read(up, UARTINT_ADDRESS);
+       en_status = ar933x_uart_read(up, UARTINTEN_ADDRESS);
+
+       spin_lock_irqsave(&up->port.lock, flags);
+
+       if( (int_status & en_status) & UARTINT_UARTRXVALIDINT_MASK )
+               ar933x_uart_rx_chars(up, &status);
+
+       if (((int_status & en_status) & UARTINT_UARTTXEMPTYINT_MASK)) {
+               /* clear TX empty interrupts */
+               ar933x_uart_write(up, UARTINT_ADDRESS,
+                                 UARTINT_UARTTXEMPTYINT_SET(1));
+
+               /* disable TX empty interrupts */
+               ar933x_uart_rmw_clear(up, UARTINTEN_ADDRESS,
+                                     UARTINTEN_UARTTXEMPTYINTEN_SET(1));
+
+               if (!uart_circ_empty(&up->port.state->xmit))
+                       ar933x_uart_tx_chars(up);
+       }
+
+       spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
+{
+       struct ar933x_uart_port *up;
+       unsigned int iir;
+
+       up = (struct ar933x_uart_port *) dev_id;
+
+       iir = ar933x_uart_read(up, UARTCS_ADDRESS);
+       if ((iir & UARTCS_UARTHOSTINT_MASK) == 0)
+               return IRQ_NONE;
+
+       DEBUG_INTR("ar933x_uart_interrupt(%d)...", irq);
+
+       spin_lock(&up->port.lock);
+       ar933x_uart_handle_port(up);
+       ar933x_uart_clear_int(up);
+       spin_unlock(&up->port.lock);
+
+       DEBUG_INTR("end.\n");
+
+       return IRQ_HANDLED;
+}
+
+static void ar933x_uart_timer(unsigned long data)
+{
+       struct uart_port *port = (void *)data;
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned int iir;
+
+       if (ar933x_ev81847_war()) {
+               struct circ_buf *xmit = &up->port.state->xmit;
+               unsigned long flags;
+
+               if (!uart_circ_empty(xmit)) {
+                       spin_lock_irqsave(&up->port.lock, flags);
+                       ar933x_uart_tx_chars(up);
+                       spin_unlock_irqrestore(&up->port.lock, flags);
+               }
+       } else {
+               iir = ar933x_uart_read(up, UARTCS_ADDRESS);
+               if (iir & UARTCS_UARTHOSTINT_MASK) {
+                       spin_lock(&up->port.lock);
+                       ar933x_uart_handle_port(up);
+                       spin_unlock(&up->port.lock);
+               }
+       }
+
+       mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
+}
+
+static int ar933x_uart_startup(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned long flags;
+       int ret;
+
+       ret = request_irq(up->port.irq, ar933x_uart_interrupt,
+                         up->port.irqflags, dev_name(up->port.dev), up);
+       if (ret)
+               return ret;
+
+       up->mcr = 0;
+
+       /*
+        * Clear the interrupt registers.
+        */
+       ar933x_uart_read(up, UARTCS_ADDRESS);
+       ar933x_uart_read(up, UARTINT_ADDRESS);
+
+       if (!is_real_interrupt(up->port.irq) || ar933x_ev81847_war()) {
+               setup_timer(&up->timer, ar933x_uart_timer, (unsigned long)port);
+               mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
+               return 0;
+       }
+
+       spin_lock_irqsave(&up->port.lock, flags);
+
+       /*
+        * Enable host interrupts
+        */
+       ar933x_uart_rmw_set(up, UARTCS_ADDRESS,
+                           UARTCS_UARTHOSTINTEN_SET(1));
+
+       /*
+        * Enable RX interrupts
+        */
+       up->ier = UART_IER_RLSI | UART_IER_RDI;
+       ar933x_uart_write(up, UARTINTEN_ADDRESS,
+                         UARTINTEN_UARTRXVALIDINTEN_SET(1));
+
+       /*
+        * And clear the interrupt registers again for luck.
+        */
+       ar933x_uart_read(up, UARTINT_ADDRESS);
+
+       spin_unlock_irqrestore(&up->port.lock, flags);
+
+       return 0;
+}
+
+static void ar933x_uart_shutdown(struct uart_port *port)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned long flags;
+
+       /*
+        * Disable all interrupts from this port
+        */
+       up->ier = 0;
+       ar933x_uart_write(up, UARTINTEN_ADDRESS, 0);
+
+       spin_lock_irqsave(&up->port.lock, flags);
+       up->port.mctrl &= ~TIOCM_OUT2;
+       ar933x_uart_set_mctrl(&up->port, up->port.mctrl);
+       spin_unlock_irqrestore(&up->port.lock, flags);
+
+       /*
+        * Disable break condition
+        */
+       ar933x_uart_rmw_clear(up, UARTCS_ADDRESS,
+                             UARTCS_UARTTXBREAK_SET(1));
+
+       if (!is_real_interrupt(up->port.irq) ||
+           ar933x_ev81847_war())
+               del_timer_sync(&up->timer);
+
+       free_irq(up->port.irq, up);
+}
+
+static const char *ar933x_uart_type(struct uart_port *port)
+{
+       return (port->type == PORT_AR933X) ? "AR933X UART" : NULL;
+}
+
+static void ar933x_uart_release_port(struct uart_port *port)
+{
+       /* Nothing to release ... */
+}
+
+static int ar933x_uart_request_port(struct uart_port *port)
+{
+       /* UARTs always present */
+       return 0;
+}
+
+static void ar933x_uart_config_port(struct uart_port *port, int flags)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+       port->type = PORT_AR933X;
+
+       /* Clear mask, so no surprise interrupts. */
+       ar933x_uart_read(up, UARTCS_ADDRESS);
+       /* Clear interrupts status register */
+       ar933x_uart_read(up, UARTINT_ADDRESS);
+}
+
+static int ar933x_uart_verify_port(struct uart_port *port,
+                                  struct serial_struct *ser)
+{
+       return -EINVAL;
+}
+
+static struct uart_ops ar933x_uart_ops = {
+       .tx_empty       = ar933x_uart_tx_empty,
+       .set_mctrl      = ar933x_uart_set_mctrl,
+       .get_mctrl      = ar933x_uart_get_mctrl,
+       .stop_tx        = ar933x_uart_stop_tx,
+       .start_tx       = ar933x_uart_start_tx,
+       .stop_rx        = ar933x_uart_stop_rx,
+       .enable_ms      = ar933x_uart_enable_ms,
+       .break_ctl      = ar933x_uart_break_ctl,
+       .startup        = ar933x_uart_startup,
+       .shutdown       = ar933x_uart_shutdown,
+       .set_termios    = ar933x_uart_set_termios,
+       .type           = ar933x_uart_type,
+       .release_port   = ar933x_uart_release_port,
+       .request_port   = ar933x_uart_request_port,
+       .config_port    = ar933x_uart_config_port,
+       .verify_port    = ar933x_uart_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+
+static struct ar933x_uart_port *ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
+
+static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up)
+{
+       unsigned int status;
+       unsigned int timeout = 60000;
+
+       /* Wait up to 60ms for the character(s) to be sent. */
+       do {
+               status = ar933x_uart_read(up, UARTDATA_ADDRESS);
+               if (--timeout == 0)
+                       break;
+               udelay(1);
+       } while (UARTDATA_UARTTXCSR_GET(status) == 0);
+}
+
+static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
+{
+       struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+       unsigned int rdata;
+
+       ar933x_uart_wait_xmitr(up);
+
+       rdata = UARTDATA_UARTTXRXDATA_SET(ch) |
+               UARTDATA_UARTTXCSR_SET(1);
+       ar933x_uart_write(up, UARTDATA_ADDRESS, rdata);
+}
+
+static void ar933x_uart_console_write(struct console *co, const char *s,
+                                     unsigned int count)
+{
+       struct ar933x_uart_port *up = ar933x_console_ports[co->index];
+       unsigned long flags;
+       unsigned int ier;
+       int locked = 1;
+
+       local_irq_save(flags);
+
+       if (up->port.sysrq) {
+               locked = 0;
+       } else if (oops_in_progress) {
+               locked = spin_trylock(&up->port.lock);
+       } else
+               spin_lock(&up->port.lock);
+
+       /*
+        * First save the IER then disable the interrupts
+        */
+       ier = ar933x_uart_read(up, UARTINTEN_ADDRESS);
+       ar933x_uart_write(up, UARTINTEN_ADDRESS, 0);
+
+       uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
+
+       /*
+        * Finally, wait for transmitter to become empty
+        * and restore the IER
+        */
+       ar933x_uart_wait_xmitr(up);
+
+       ar933x_uart_write(up, UARTINTEN_ADDRESS, ier);
+       ar933x_uart_write(up, UARTINT_ADDRESS, UARTINT_RSTMASK);
+
+       if (locked)
+               spin_unlock(&up->port.lock);
+
+       local_irq_restore(flags);
+}
+
+static int ar933x_uart_console_setup(struct console *co, char *options)
+{
+       struct ar933x_uart_port *up;
+       int baud = 115200;
+       int bits = 8;
+       int parity = 'n';
+       int flow = 'n';
+
+       if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS)
+               return -EINVAL;
+
+       up = ar933x_console_ports[co->index];
+       if (!up)
+               return -ENODEV;
+
+       if (options)
+               uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+       return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static struct console ar933x_uart_console = {
+       .name           = "ttyATH",
+       .write          = ar933x_uart_console_write,
+       .device         = uart_console_device,
+       .setup          = ar933x_uart_console_setup,
+       .flags          = CON_PRINTBUFFER,
+       .index          = -1,
+       .data           = &ar933x_uart_driver,
+};
+
+static int __init ar933x_uart_console_init(void)
+{
+       register_console(&ar933x_uart_console);
+       return 0;
+}
+console_initcall(ar933x_uart_console_init);
+
+static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
+{
+       ar933x_console_ports[up->port.line] = up;
+}
+
+#define AR933X_SERIAL_CONSOLE  &ar933x_uart_console
+
+#else
+
+static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {}
+
+#define AR933X_SERIAL_CONSOLE  NULL
+
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
+
+static struct uart_driver ar933x_uart_driver = {
+       .owner          = THIS_MODULE,
+       .driver_name    = DRIVER_NAME,
+       .dev_name       = "ttyATH",
+       .nr             = CONFIG_SERIAL_AR933X_NR_UARTS,
+       .cons           = AR933X_SERIAL_CONSOLE,
+};
+
+static int __devinit ar933x_uart_probe(struct platform_device *pdev)
+{
+       struct ar933x_uart_platform_data *pdata;
+       struct ar933x_uart_port *up;
+       struct uart_port *port;
+       struct resource *mem_res;
+       struct resource *irq_res;
+       int id;
+       int ret;
+
+       pdata = pdev->dev.platform_data;
+       if (!pdata)
+               return -EINVAL;
+
+       id = pdev->id;
+       if (id == -1)
+               id = 0;
+
+       if (id > CONFIG_SERIAL_AR933X_NR_UARTS)
+               return -EINVAL;
+
+       mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!mem_res) {
+               dev_err(&pdev->dev, "no MEM resource\n");
+               return -EINVAL;
+       }
+
+       irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (!irq_res) {
+               dev_err(&pdev->dev, "no IRQ resource\n");
+               return -EINVAL;
+       }
+
+       up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL);
+       if (!up)
+               return -ENOMEM;
+
+       port = &up->port;
+       port->mapbase = mem_res->start;
+
+       port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE);
+       if (!port->membase) {
+               ret = -ENOMEM;
+               goto err_free_up;
+       }
+
+       port->line = id;
+       port->irq = irq_res->start;
+       port->dev = &pdev->dev;
+       port->type = PORT_AR933X;
+       port->iotype = UPIO_MEM32;
+       port->uartclk = pdata->uartclk;
+
+       port->regshift = 2;
+       port->fifosize = AR933X_UART_FIFO_SIZE;
+       port->ops = &ar933x_uart_ops;
+
+       ar933x_uart_add_console_port(up);
+
+       ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
+       if (ret)
+               goto err_unmap;
+
+       platform_set_drvdata(pdev, up);
+       return 0;
+
+err_unmap:
+       iounmap(up->port.membase);
+err_free_up:
+       kfree(up);
+       return ret;
+}
+
+static int __devexit ar933x_uart_remove(struct platform_device *pdev)
+{
+       struct ar933x_uart_port *up;
+
+       up = platform_get_drvdata(pdev);
+       platform_set_drvdata(pdev, NULL);
+
+       if (up) {
+               uart_remove_one_port(&ar933x_uart_driver, &up->port);
+               iounmap(up->port.membase);
+               kfree(up);
+       }
+
+       return 0;
+}
+
+static struct platform_driver ar933x_uart_platform_driver = {
+       .probe          = ar933x_uart_probe,
+       .remove         = __devexit_p(ar933x_uart_remove),
+       .driver         = {
+               .name           = DRIVER_NAME,
+               .owner          = THIS_MODULE,
+       },
+};
+
+static int __init ar933x_uart_init(void)
+{
+       int ret;
+
+       ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS;
+       ret = uart_register_driver(&ar933x_uart_driver);
+       if (ret)
+               goto err_out;
+
+       ret = platform_driver_register(&ar933x_uart_platform_driver);
+       if (ret)
+               goto err_unregister_uart_driver;
+
+       return 0;
+
+err_unregister_uart_driver:
+       uart_unregister_driver(&ar933x_uart_driver);
+err_out:
+       return ret;
+}
+
+static void __exit ar933x_uart_exit(void)
+{
+       platform_driver_unregister(&ar933x_uart_platform_driver);
+       uart_unregister_driver(&ar933x_uart_driver);
+}
+
+module_init(ar933x_uart_init);
+module_exit(ar933x_uart_exit);
+
+MODULE_DESCRIPTION("Atheros AR933X UART driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch b/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch
new file mode 100644 (file)
index 0000000..04da7ad
--- /dev/null
@@ -0,0 +1,58 @@
+commit 24920fbc58c0183013db148f8be6fbc12d3bba9a
+Author: Gabor Juhos <juhosg@openwrt.org>
+Date:   Sun Mar 27 12:04:36 2011 +0200
+
+    serial: add driver for the built-in UART of the AR933X SoC
+    
+    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1632,4 +1632,27 @@ config SERIAL_ALTERA_UART_CONSOLE
+       help
+         Enable a Altera UART port to be the system console.
++config SERIAL_AR933X
++      bool "AR933X serial port support"
++      depends on SOC_AR933X
++      select SERIAL_CORE
++      help
++        If you have an Atheros AR933X SOC based board and want to use the
++        built-in UART of the SoC, say Y to this option.
++
++config SERIAL_AR933X_CONSOLE
++      bool "Console on AR933X serial port"
++      depends on SERIAL_AR933X=y
++      select SERIAL_CORE_CONSOLE
++      help
++        Enable a built-in UART port of the AR933X to be the system console.
++
++config SERIAL_AR933X_NR_UARTS
++      int "Maximum number of AR933X serial ports"
++      depends on SERIAL_AR933X
++      default "2"
++      help
++        Set this to the number of serial ports you want the driver
++        to support.
++
+ endmenu
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -89,3 +89,5 @@ obj-$(CONFIG_SERIAL_ALTERA_UART) += alte
+ obj-$(CONFIG_SERIAL_MRST_MAX3110)     += mrst_max3110.o
+ obj-$(CONFIG_SERIAL_MFD_HSU)  += mfd.o
+ obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
++obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
++
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -199,6 +199,9 @@
+ /* TI OMAP-UART */
+ #define PORT_OMAP     96
++/* Atheros AR933X SoC */
++#define PORT_AR933X   98
++
+ #ifdef __KERNEL__
+ #include <linux/compiler.h>