ramips: Power down phy on disabled switch ports
authorGabor Juhos <juhosg@openwrt.org>
Wed, 29 Aug 2012 10:37:45 +0000 (10:37 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Wed, 29 Aug 2012 10:37:45 +0000 (10:37 +0000)
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33304

target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c

index 1ecb1a6ee79f1fa1982ef969bad416bf246b6b3b..309efdeb78dbcafba8c2f8626b522e336c241590 100644 (file)
@@ -1,5 +1,6 @@
 #include <linux/ioport.h>
 #include <linux/switch.h>
+#include <linux/mii.h>
 
 #include <rt305x_regs.h>
 #include <rt305x_esw_platform.h>
@@ -326,6 +327,57 @@ rt305x_esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
                       (msc & RT305X_ESW_VMSC_MSC_M) << s);
 }
 
+static unsigned
+rt305x_esw_get_port_disable(struct rt305x_esw *esw)
+{
+       unsigned reg;
+       reg = rt305x_esw_rr(esw, RT305X_ESW_REG_POC0);
+       return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
+              RT305X_ESW_POC0_DIS_PORT_M;
+}
+
+static void
+rt305x_esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
+{
+       unsigned old_mask;
+       unsigned enable_mask;
+       unsigned changed;
+       int i;
+
+       old_mask = rt305x_esw_get_port_disable(esw);
+       changed = old_mask ^ disable_mask;
+       enable_mask = old_mask & disable_mask;
+
+       /* enable before writing to MII */
+       rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
+                      (RT305X_ESW_POC0_DIS_PORT_M <<
+                       RT305X_ESW_POC0_DIS_PORT_S),
+                      enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
+
+       for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
+               if (!(changed & (1 << i)))
+                       continue;
+               if (disable_mask & (1 << i)) {
+                       /* disable */
+                       rt305x_mii_write(esw, i, MII_BMCR,
+                                        BMCR_PDOWN);
+               } else {
+                       /* enable */
+                       rt305x_mii_write(esw, i, MII_BMCR,
+                                        BMCR_FULLDPLX |
+                                        BMCR_ANENABLE |
+                                        BMCR_ANRESTART |
+                                        BMCR_SPEED100);
+               }
+       }
+
+       /* disable after writing to MII */
+       rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
+                      (RT305X_ESW_POC0_DIS_PORT_M <<
+                       RT305X_ESW_POC0_DIS_PORT_S),
+                      disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
+}
+
 static int
 rt305x_esw_apply_config(struct switch_dev *dev);
 
@@ -333,6 +385,7 @@ static void
 rt305x_esw_hw_init(struct rt305x_esw *esw)
 {
        int i;
+       u8 port_disable = 0;
        u8 port_map = RT305X_ESW_PMAP_LLLLLL;
 
        /* vodoo from original driver */
@@ -384,10 +437,21 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
        rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED);
        rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED);
 
+       /* Copy disabled port configuration from bootloader setup */
+       port_disable = rt305x_esw_get_port_disable(esw);
+       for (i = 0; i < 6; i++)
+               esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+
        rt305x_mii_write(esw, 0, 31, 0x8000);
        for (i = 0; i < 5; i++) {
-               /* TX10 waveform coefficient */
-               rt305x_mii_write(esw, i, 0, 0x3100);
+               if (esw->ports[i].disable) {
+                       rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+               } else {
+                       rt305x_mii_write(esw, i, MII_BMCR,
+                                        BMCR_FULLDPLX |
+                                        BMCR_ANENABLE |
+                                        BMCR_SPEED100);
+               }
                /* TX10 waveform coefficient */
                rt305x_mii_write(esw, i, 26, 0x1601);
                /* TX100/TX10 AD/DA current bias */
@@ -482,9 +546,7 @@ rt305x_esw_apply_config(struct switch_dev *dev)
                                      RT305X_ESW_REG_P0LED + 4*i);
        }
 
-       rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
-                      RT305X_ESW_POC0_DIS_PORT_M << RT305X_ESW_POC0_DIS_PORT_S,
-                      disable << RT305X_ESW_POC0_DIS_PORT_S);
+       rt305x_esw_set_port_disable(esw, disable);
        rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2,
                       (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
                        RT305X_ESW_SGC2_DOUBLE_TAG_S),