ar71xx: add support for TP-LINK Archer C7 v5
authorArvid E. Picciani <aep@exys.org>
Mon, 16 Apr 2018 11:18:37 +0000 (13:18 +0200)
committerJohn Crispin <john@phrozen.org>
Wed, 20 Jun 2018 13:36:19 +0000 (15:36 +0200)
TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros
QCA9563+QCA9880.

Specification:

- 750/400/250 MHz (CPU/DDR/AHB
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 10x LED, 2x button
- UART header on PCB

Flash instruction:
1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface

Flash instruction using TFTP recovery:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin
and rename it to ArcherC7v5_tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Signed-off-by: Arvid E. Picciani <aep@exys.org>
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic-tp-link.mk
tools/firmware-utils/src/tplink-safeloader.c

index c8e10dae9cea5b859e1ffcfbb850e62270cad2ac..d8039fdf6cfd6ecf4ee5642a89ac758a1bdfe7a2 100755 (executable)
@@ -488,6 +488,7 @@ ar71xx_setup_interfaces()
                        "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
                ;;
        archer-c7-v4|\
+       archer-c7-v5|\
        tl-wdr4300|\
        tl-wr1041n-v2)
                ucidef_add_switch "switch0" \
index 29fd244ab50238d59902722afdcad07ac04d3406..137baa935e984346789c194edec46d07b9ea2cc4 100644 (file)
@@ -66,6 +66,7 @@ get_status_led() {
        archer-c60-v1|\
        archer-c60-v2|\
        archer-c7-v4|\
+       archer-c7-v5|\
        fritz300e|\
        fritz4020|\
        fritz450e|\
index c3ae7b64ecaa179f3d31a3dcf46275e71e46d58d..0ed624efc8a1389d0c09383c272384c7b43deb27 100644 (file)
@@ -65,7 +65,8 @@ case "$FIRMWARE" in
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
                ;;
-       archer-c7-v4)
+       archer-c7-v4|\
+       archer-c7-v5)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
                ;;
index 94add79ea967d5b0ecd322332969a125fced0c11..b8f9a705eed2c1efdf1019cdca429bd600d889ea 100755 (executable)
@@ -476,6 +476,9 @@ ar71xx_board_detect() {
        *"Archer C7 v4")
                name="archer-c7-v4"
                ;;
+       *"Archer C7 v5")
+               name="archer-c7-v5"
+               ;;
        *"Archer C58 v1")
                name="archer-c58-v1"
                ;;
index 9bc3f8564b12dac03f5eb0d0b9ad71cc072c56ca..a7968b5bb084b6f18c604c996af6d78d90aff464 100755 (executable)
@@ -212,6 +212,7 @@ platform_check_image() {
        archer-c60-v1|\
        archer-c60-v2|\
        archer-c7-v4|\
+       archer-c7-v5|\
        bullet-m|\
        c-55|\
        carambola2|\
index 6b6874a48e8ebacfd4a11cad7d1c81843bfba430..996fd4c68a1a89e969fbea191c96ddd49ee60a17 100644 (file)
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1)                += mach-archer-c60-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2)         += mach-archer-c60-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C7)             += mach-archer-c7.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C7)             += mach-archer-c7-v4.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7)             += mach-archer-c7-v5.o
 obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)           += mach-arduino-yun.o
 obj-$(CONFIG_ATH79_MACH_AW_NR580)              += mach-aw-nr580.o
 obj-$(CONFIG_ATH79_MACH_BHR_4GRV2)             += mach-bhr-4grv2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c
new file mode 100644 (file)
index 0000000..a80e0bd
--- /dev/null
@@ -0,0 +1,207 @@
+/*
+ * Atheros ARCHER_C7 reference board support
+ *
+ * Copyright (c) 2018 Arvid E. Picciani <aep@exys.org>
+ * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/proc_fs.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+
+#define ARCHER_C7_GPIO_BTN_RESET       5
+#define ARCHER_C7_GPIO_BTN_WPS_WIFI    2
+
+#define ARCHER_C7_GPIO_LED_WLAN5       9
+#define ARCHER_C7_GPIO_LED_POWER       6
+#define ARCHER_C7_GPIO_LED_USB         7
+#define ARCHER_C7_GPIO_LED_WPS         1
+#define ARCHER_C7_GPIO_LED_LAN1                8
+#define ARCHER_C7_GPIO_LED_LAN2                17
+#define ARCHER_C7_GPIO_LED_LAN3                16
+#define ARCHER_C7_GPIO_LED_LAN4                15
+#define ARCHER_C7_GPIO_LED_WAN_GREEN   21
+#define ARCHER_C7_GPIO_LED_WAN_AMBER   20
+#define ARCHER_C7_GPIO_LED_WLAN2       14
+#define ARCHER_C7_GPIO_USB_PWR   19
+
+#define ARCHER_C7_KEYS_POLL_INTERVAL        20     /* msecs */
+#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL    (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C7_MAC0_OFFSET               0
+#define ARCHER_C7_MAC1_OFFSET               6
+#define ARCHER_C7_WMAC_CALDATA_OFFSET       0x1000
+
+#define ARCHER_C7_GPIO_MDC                     3
+#define ARCHER_C7_GPIO_MDIO                    4
+
+static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = {
+       {
+               .name           = "archer-c7-v5:green:power",
+               .gpio           = ARCHER_C7_GPIO_LED_POWER,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:wps",
+               .gpio           = ARCHER_C7_GPIO_LED_WPS,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:wlan2g",
+               .gpio           = ARCHER_C7_GPIO_LED_WLAN2,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:wlan5g",
+               .gpio           = ARCHER_C7_GPIO_LED_WLAN5,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:lan1",
+               .gpio           = ARCHER_C7_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:lan2",
+               .gpio           = ARCHER_C7_GPIO_LED_LAN2,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:lan3",
+               .gpio           = ARCHER_C7_GPIO_LED_LAN3,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:lan4",
+               .gpio           = ARCHER_C7_GPIO_LED_LAN4,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:wan",
+               .gpio           =  ARCHER_C7_GPIO_LED_WAN_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:amber:wan",
+               .gpio           =  ARCHER_C7_GPIO_LED_WAN_AMBER,
+               .active_low     = 1,
+       }, {
+               .name           = "archer-c7-v5:green:usb",
+               .gpio           =  ARCHER_C7_GPIO_LED_USB,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = {
+        {
+                .desc           = "WPS and WIFI button",
+                .type           = EV_KEY,
+                .code           = KEY_WPS_BUTTON,
+                .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+                .gpio           = ARCHER_C7_GPIO_BTN_WPS_WIFI,
+                .active_low     = 1,
+        },
+        {
+                .desc           = "Reset button",
+                .type           = EV_KEY,
+                .code           = KEY_RESTART,
+                .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+                .gpio           = ARCHER_C7_GPIO_BTN_RESET,
+                .active_low     = 1,
+        },
+};
+
+
+static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = {
+       .mode = AR8327_PAD_MAC_SGMII,
+       .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data archer_c7_v5_ar8337_data = {
+       .pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+};
+
+static struct mdio_board_info archer_c7_v5_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &archer_c7_v5_ar8337_data,
+       },
+};
+
+
+static void __init archer_c7_v5_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f060008);
+
+       ath79_register_m25p80(NULL);
+
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio),
+                               archer_c7_v5_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(archer_c7_v5_gpio_keys),
+                                       archer_c7_v5_gpio_keys);
+
+       ath79_register_usb();
+
+       ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
+       ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
+
+       ath79_register_mdio(0, 0x0);
+
+       mdiobus_register_board_info(archer_c7_v5_mdio0_info,
+                                   ARRAY_SIZE(archer_c7_v5_mdio0_info));
+
+       gpio_request_one(ARCHER_C7_GPIO_USB_PWR,
+                        GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+                        "USB power");
+
+       ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
+       ath79_register_pci();
+
+       /* GMAC0 is connected to an AR8337 switch */
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth0_data.speed = SPEED_1000;
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+       ath79_eth0_data.phy_mask = BIT(0);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5",
+            archer_c7_v5_setup);
index 992e0806409f8929a82d40238350a8119016e289..dce25c6fc8d53d09fec8e296fe5fc373b6de4b58 100644 (file)
@@ -52,6 +52,7 @@ enum ath79_mach_type {
        ATH79_MACH_ARCHER_C7,                   /* TP-LINK Archer C7 board */
        ATH79_MACH_ARCHER_C7_V2,                /* TP-LINK Archer C7 V2 board */
        ATH79_MACH_ARCHER_C7_V4,                /* TP-LINK Archer C7 V4 board */
+       ATH79_MACH_ARCHER_C7_V5,                /* TP-LINK Archer C7 V5 board */
        ATH79_MACH_ARDUINO_YUN,                 /* Yun */
        ATH79_MACH_AW_NR580,                    /* AzureWave AW-NR580 */
        ATH79_MACH_BHR_4GRV2,                   /* Buffalo BHR-4GRV2 */
index 429540a52cb32b3a79f419eaf67bad09c562b178..6f7d608b01ed3a6ebf90a0fa1754cbed3f2cadff 100644 (file)
@@ -141,6 +141,17 @@ define Device/archer-c7-v4
 endef
 TARGET_DEVICES += archer-c7-v4
 
+define Device/archer-c7-v5
+  $(Device/archer-c7-v4)
+  DEVICE_TITLE := TP-LINK Archer C7 v5
+  BOARDNAME := ARCHER-C7-V5
+  TPLINK_BOARD_ID := ARCHER-C7-V5
+  IMAGE_SIZE := 15104k
+  MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,1536k@0xc0000(kernel),13824k(rootfs),15360k@0xc0000(firmware)
+  SUPPORTED_DEVICES := archer-c7-v5
+endef
+TARGET_DEVICES += archer-c7-v5
+
 define Device/cpe510-520-v1
   DEVICE_TITLE := TP-LINK CPE510/520 v1
   DEVICE_PACKAGES := rssileds
index 27c5aa849794fa8e93f06b6d79ad21c8daaf8d14..10577cbaaf33696473137301a1c74fbe756a3c61 100644 (file)
@@ -578,6 +578,52 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system",
        },
 
+       /** Firmware layout for the C7 v5*/
+       {
+               .id = "ARCHER-C7-V5",
+               .support_list =
+                       "SupportList:\n"
+                       "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
+                       "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n",
+
+               .support_trail = '\x00',
+               .soft_ver = "soft_ver:1.0.0\n",
+
+               /**
+                 We use a bigger os-image partition than the stock images (and thus
+                 smaller file-system), as our kernel doesn't fit in the stock firmware's
+                 1MB os-image.
+                 */
+               .partitions = {
+                       {"factory-boot",    0x00000,  0x20000},
+                       {"fs-uboot",        0x20000,  0x20000},
+                       {"partition-table", 0x40000,  0x10000},
+                       {"radio",           0x50000,  0x10000},
+                       {"default-mac",     0x60000,  0x00200},
+                       {"pin",             0x60200,  0x00200},
+                       {"device-id",       0x60400,  0x00100},
+                       {"product-info",    0x60500,  0x0fb00},
+                       {"soft-version",    0x70000,  0x01000},
+                       {"extra-para",      0x71000,  0x01000},
+                       {"support-list",    0x72000,  0x0a000},
+                       {"profile",         0x7c000,  0x04000},
+                       {"user-config",     0x80000,  0x40000},
+
+
+                       {"os-image",        0xc0000,  0x180000}, /* Stock: base 0xc0000  size 0x120000 */
+                       {"file-system",     0x240000, 0xd80000}, /* Stock: base 0x1e0000 size 0xde0000 */
+
+                       {"log",             0xfc0000, 0x20000},
+                       {"certificate",     0xfe0000, 0x10000},
+                       {"default-config",  0xff0000, 0x10000},
+                       {NULL, 0, 0}
+
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system",
+       },
+
        /** Firmware layout for the C9 */
        {
                .id = "ARCHERC9",
@@ -1389,7 +1435,7 @@ static void build_image(const char *output,
            strcasecmp(info->id, "TLWR1043NV5") == 0) {
                const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
                parts[5] = put_data("extra-para", mdat, 11);
-       } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0) {
+       } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
                const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
                parts[5] = put_data("extra-para", mdat, 11);
        }