package/boot/uboot-mediatek/patches/429-add-netcore-n60.patch

   1 --- /dev/null
   2 +++ b/configs/mt7986_netcore_n60_defconfig
   3 @@ -0,0 +1,182 @@
   4 +CONFIG_ARM=y
   5 +CONFIG_POSITION_INDEPENDENT=y
   6 +CONFIG_ARCH_MEDIATEK=y
   7 +CONFIG_TARGET_MT7986=y
   8 +CONFIG_TEXT_BASE=0x41e00000
   9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  10 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
  11 +CONFIG_NR_DRAM_BANKS=1
  12 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-netcore-n60"
  13 +CONFIG_DEFAULT_ENV_FILE="netcore_n60_env"
  14 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-netcore-n60.dtb"
  15 +CONFIG_OF_LIBFDT_OVERLAY=y
  16 +CONFIG_DEBUG_UART_BASE=0x11002000
  17 +CONFIG_DEBUG_UART_CLOCK=40000000
  18 +CONFIG_DEBUG_UART=y
  19 +CONFIG_SYS_LOAD_ADDR=0x46000000
  20 +CONFIG_SMBIOS_PRODUCT_NAME=""
  21 +CONFIG_AUTOBOOT_KEYED=y
  22 +CONFIG_BOOTDELAY=30
  23 +CONFIG_AUTOBOOT_MENU_SHOW=y
  24 +CONFIG_CFB_CONSOLE_ANSI=y
  25 +CONFIG_BOARD_LATE_INIT=y
  26 +CONFIG_BUTTON=y
  27 +CONFIG_BUTTON_GPIO=y
  28 +CONFIG_GPIO_HOG=y
  29 +CONFIG_CMD_ENV_FLAGS=y
  30 +CONFIG_FIT=y
  31 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  32 +CONFIG_LED=y
  33 +CONFIG_LED_BLINK=y
  34 +CONFIG_LED_GPIO=y
  35 +CONFIG_LOGLEVEL=7
  36 +CONFIG_LOG=y
  37 +CONFIG_SYS_PROMPT="MT7986> "
  38 +CONFIG_CMD_BOOTMENU=y
  39 +CONFIG_CMD_BOOTP=y
  40 +CONFIG_CMD_BUTTON=y
  41 +CONFIG_CMD_CACHE=y
  42 +CONFIG_CMD_CDP=y
  43 +CONFIG_CMD_CPU=y
  44 +CONFIG_CMD_DHCP=y
  45 +CONFIG_CMD_DM=y
  46 +CONFIG_CMD_DNS=y
  47 +CONFIG_CMD_ECHO=y
  48 +CONFIG_CMD_ENV_READMEM=y
  49 +CONFIG_CMD_ERASEENV=y
  50 +CONFIG_CMD_EXT4=y
  51 +CONFIG_CMD_FAT=y
  52 +CONFIG_CMD_FDT=y
  53 +CONFIG_CMD_FS_GENERIC=y
  54 +CONFIG_CMD_FS_UUID=y
  55 +CONFIG_CMD_GPIO=y
  56 +CONFIG_CMD_GPT=y
  57 +CONFIG_CMD_HASH=y
  58 +CONFIG_CMD_ITEST=y
  59 +CONFIG_CMD_LED=y
  60 +CONFIG_CMD_LICENSE=y
  61 +CONFIG_CMD_LINK_LOCAL=y
  62 +# CONFIG_CMD_MBR is not set
  63 +CONFIG_CMD_PCI=y
  64 +CONFIG_CMD_PSTORE=y
  65 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  66 +CONFIG_CMD_SF_TEST=y
  67 +CONFIG_CMD_PING=y
  68 +CONFIG_CMD_PXE=y
  69 +CONFIG_CMD_PWM=y
  70 +CONFIG_CMD_SMC=y
  71 +CONFIG_CMD_TFTPBOOT=y
  72 +CONFIG_CMD_TFTPSRV=y
  73 +CONFIG_CMD_UBI=y
  74 +CONFIG_CMD_UBI_RENAME=y
  75 +CONFIG_CMD_UBIFS=y
  76 +CONFIG_CMD_ASKENV=y
  77 +CONFIG_CMD_PART=y
  78 +CONFIG_CMD_RARP=y
  79 +CONFIG_CMD_SETEXPR=y
  80 +CONFIG_CMD_SLEEP=y
  81 +CONFIG_CMD_SNTP=y
  82 +CONFIG_CMD_SOURCE=y
  83 +CONFIG_CMD_STRINGS=y
  84 +CONFIG_CMD_USB=y
  85 +CONFIG_CMD_UUID=y
  86 +CONFIG_DISPLAY_CPUINFO=y
  87 +CONFIG_DM_MTD=y
  88 +CONFIG_DM_REGULATOR=y
  89 +CONFIG_DM_REGULATOR_FIXED=y
  90 +CONFIG_DM_REGULATOR_GPIO=y
  91 +CONFIG_DM_USB=y
  92 +CONFIG_DM_PWM=y
  93 +CONFIG_PWM_MTK=y
  94 +CONFIG_HUSH_PARSER=y
  95 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  96 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  97 +CONFIG_VERSION_VARIABLE=y
  98 +CONFIG_PARTITION_UUIDS=y
  99 +CONFIG_NETCONSOLE=y
 100 +CONFIG_REGMAP=y
 101 +CONFIG_SYSCON=y
 102 +CONFIG_CLK=y
 103 +CONFIG_DM_GPIO=y
 104 +CONFIG_DM_SCSI=y
 105 +CONFIG_AHCI=y
 106 +CONFIG_AHCI_PCI=y
 107 +CONFIG_SCSI_AHCI=y
 108 +CONFIG_SCSI=y
 109 +CONFIG_CMD_SCSI=y
 110 +CONFIG_PHY=y
 111 +CONFIG_PHY_MTK_TPHY=y
 112 +CONFIG_PHY_FIXED=y
 113 +CONFIG_MTK_AHCI=y
 114 +CONFIG_DM_ETH=y
 115 +CONFIG_MEDIATEK_ETH=y
 116 +CONFIG_PCI=y
 117 +# CONFIG_MMC is not set
 118 +# CONFIG_DM_MMC is not set
 119 +CONFIG_MTD=y
 120 +CONFIG_MTD_UBI_FASTMAP=y
 121 +CONFIG_DM_PCI=y
 122 +CONFIG_PCIE_MEDIATEK=y
 123 +CONFIG_PINCTRL=y
 124 +CONFIG_PINCONF=y
 125 +CONFIG_PINCTRL_MT7622=y
 126 +CONFIG_POWER_DOMAIN=y
 127 +CONFIG_PRE_CONSOLE_BUFFER=y
 128 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 129 +CONFIG_MTK_POWER_DOMAIN=y
 130 +CONFIG_RAM=y
 131 +CONFIG_DM_SERIAL=y
 132 +CONFIG_MTK_SERIAL=y
 133 +CONFIG_SPI=y
 134 +CONFIG_DM_SPI=y
 135 +CONFIG_MTK_SPI_NAND=y
 136 +CONFIG_MTK_SPI_NAND_MTD=y
 137 +CONFIG_SYSRESET_WATCHDOG=y
 138 +CONFIG_WDT_MTK=y
 139 +CONFIG_LZO=y
 140 +CONFIG_ZSTD=y
 141 +CONFIG_HEXDUMP=y
 142 +CONFIG_RANDOM_UUID=y
 143 +CONFIG_REGEX=y
 144 +CONFIG_USB=y
 145 +CONFIG_USB_HOST=y
 146 +CONFIG_USB_XHCI_HCD=y
 147 +CONFIG_USB_XHCI_MTK=y
 148 +CONFIG_USB_STORAGE=y
 149 +CONFIG_OF_EMBED=y
 150 +CONFIG_ENV_OVERWRITE=y
 151 +CONFIG_ENV_IS_IN_UBI=y
 152 +CONFIG_ENV_UBI_PART="ubi"
 153 +CONFIG_ENV_SIZE=0x1f000
 154 +CONFIG_ENV_SIZE_REDUND=0x1f000
 155 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 156 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 157 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 158 +CONFIG_NET_RANDOM_ETHADDR=y
 159 +CONFIG_REGMAP=y
 160 +CONFIG_SYSCON=y
 161 +CONFIG_CLK=y
 162 +CONFIG_PHY_FIXED=y
 163 +CONFIG_DM_ETH=y
 164 +CONFIG_MEDIATEK_ETH=y
 165 +CONFIG_PINCTRL=y
 166 +CONFIG_PINCONF=y
 167 +CONFIG_PINCTRL_MT7986=y
 168 +CONFIG_POWER_DOMAIN=y
 169 +CONFIG_MTK_POWER_DOMAIN=y
 170 +CONFIG_DM_REGULATOR=y
 171 +CONFIG_DM_REGULATOR_FIXED=y
 172 +CONFIG_DM_SERIAL=y
 173 +CONFIG_MTK_SERIAL=y
 174 +CONFIG_HEXDUMP=y
 175 +CONFIG_USE_DEFAULT_ENV_FILE=y
 176 +CONFIG_MTD_SPI_NAND=y
 177 +CONFIG_MTK_SPIM=y
 178 +CONFIG_CMD_MTD=y
 179 +CONFIG_CMD_NAND=y
 180 +CONFIG_CMD_NAND_TRIMFFS=y
 181 +CONFIG_LMB_MAX_REGIONS=64
 182 +CONFIG_USE_IPADDR=y
 183 +CONFIG_IPADDR="192.168.1.1"
 184 +CONFIG_USE_SERVERIP=y
 185 +CONFIG_SERVERIP="192.168.1.254"
 186 --- /dev/null
 187 +++ b/arch/arm/dts/mt7986a-netcore-n60.dts
 188 @@ -0,0 +1,185 @@
 189 +// SPDX-License-Identifier: GPL-2.0
 190 +/*
 191 + * Copyright (c) 2021 MediaTek Inc.
 192 + * Author: Sam Shih <sam.shih@mediatek.com>
 193 + */
 194 +
 195 +/dts-v1/;
 196 +#include "mt7986.dtsi"
 197 +#include <dt-bindings/gpio/gpio.h>
 198 +#include <dt-bindings/input/linux-event-codes.h>
 199 +
 200 +/ {
 201 +       #address-cells = <1>;
 202 +       #size-cells = <1>;
 203 +       model = "Netcore N60";
 204 +       compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
 205 +
 206 +       chosen {
 207 +               stdout-path = &uart0;
 208 +               tick-timer = &timer0;
 209 +       };
 210 +
 211 +       memory@40000000 {
 212 +               device_type = "memory";
 213 +               reg = <0x40000000 0x20000000>;
 214 +       };
 215 +
 216 +       keys {
 217 +               compatible = "gpio-keys";
 218 +
 219 +               factory {
 220 +                       label = "reset";
 221 +                       linux,code = <KEY_RESTART>;
 222 +                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 223 +               };
 224 +
 225 +               wps {
 226 +                       label = "wps";
 227 +                       linux,code = <KEY_WPS_BUTTON>;
 228 +                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 229 +               };
 230 +       };
 231 +
 232 +       leds {
 233 +               compatible = "gpio-leds";
 234 +
 235 +               status_red {
 236 +                       label = "red:status";
 237 +                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 238 +               };
 239 +
 240 +               status_green {
 241 +                       label = "green:status";
 242 +                       gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 243 +               };
 244 +       };
 245 +};
 246 +
 247 +&uart0 {
 248 +       mediatek,force-highspeed;
 249 +       status = "okay";
 250 +};
 251 +
 252 +&uart1 {
 253 +       pinctrl-names = "default";
 254 +       pinctrl-0 = <&uart1_pins>;
 255 +       status = "disabled";
 256 +};
 257 +
 258 +&eth {
 259 +       status = "okay";
 260 +       mediatek,gmac-id = <0>;
 261 +       phy-mode = "2500base-x";
 262 +       mediatek,switch = "mt7531";
 263 +       reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 264 +
 265 +       fixed-link {
 266 +               speed = <2500>;
 267 +               full-duplex;
 268 +       };
 269 +};
 270 +
 271 +&pinctrl {
 272 +       spi_flash_pins: spi0-pins-func-1 {
 273 +               mux {
 274 +                       function = "flash";
 275 +                       groups = "spi0", "spi0_wp_hold";
 276 +               };
 277 +
 278 +               conf-pu {
 279 +                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
 280 +                       drive-strength = <MTK_DRIVE_8mA>;
 281 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
 282 +               };
 283 +
 284 +               conf-pd {
 285 +                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
 286 +                       drive-strength = <MTK_DRIVE_8mA>;
 287 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
 288 +               };
 289 +       };
 290 +
 291 +       spic_pins: spi1-pins-func-1 {
 292 +               mux {
 293 +                       function = "spi";
 294 +                       groups = "spi1_2";
 295 +               };
 296 +       };
 297 +
 298 +       uart1_pins: spi1-pins-func-3 {
 299 +               mux {
 300 +                       function = "uart";
 301 +                       groups = "uart1_2";
 302 +               };
 303 +       };
 304 +
 305 +       pwm_pins: pwm0-pins-func-1 {
 306 +               mux {
 307 +                       function = "pwm";
 308 +                       groups = "pwm0";
 309 +               };
 310 +       };
 311 +};
 312 +
 313 +&pwm {
 314 +       pinctrl-names = "default";
 315 +       pinctrl-0 = <&pwm_pins>;
 316 +       status = "okay";
 317 +};
 318 +
 319 +&spi0 {
 320 +       #address-cells = <1>;
 321 +       #size-cells = <0>;
 322 +       pinctrl-names = "default";
 323 +       pinctrl-0 = <&spi_flash_pins>;
 324 +       status = "okay";
 325 +       must_tx;
 326 +       enhance_timing;
 327 +       dma_ext;
 328 +       ipm_design;
 329 +       support_quad;
 330 +       tick_dly = <1>;
 331 +       sample_sel = <0>;
 332 +
 333 +       spi_nand@1 {
 334 +               compatible = "spi-nand";
 335 +               reg = <1>;
 336 +               spi-max-frequency = <52000000>;
 337 +
 338 +               partitions {
 339 +                       compatible = "fixed-partitions";
 340 +                       #address-cells = <1>;
 341 +                       #size-cells = <1>;
 342 +
 343 +                       partition@0 {
 344 +                               label = "bl2";
 345 +                               reg = <0x0 0x100000>;
 346 +                       };
 347 +
 348 +                       partition@100000 {
 349 +                               label = "orig-env";
 350 +                               reg = <0x100000 0x80000>;
 351 +                       };
 352 +
 353 +                       partition@160000 {
 354 +                               label = "factory";
 355 +                               reg = <0x180000 0x200000>;
 356 +                       };
 357 +
 358 +                       partition@380000 {
 359 +                               label = "fip";
 360 +                               reg = <0x380000 0x200000>;
 361 +                       };
 362 +
 363 +                       partition@580000 {
 364 +                               label = "ubi";
 365 +                               reg = <0x580000 0x7280000>;
 366 +                       };
 367 +               };
 368 +       };
 369 +};
 370 +
 371 +&watchdog {
 372 +       status = "disabled";
 373 +};
 374 --- /dev/null
 375 +++ b/netcore_n60_env
 376 @@ -0,0 +1,57 @@
 377 +ipaddr=192.168.1.1
 378 +serverip=192.168.1.254
 379 +loadaddr=0x46000000
 380 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 381 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 382 +bootconf=config-1
 383 +bootdelay=0
 384 +bootfile=openwrt-mediatek-filogic-netcore_n60-initramfs-recovery.itb
 385 +bootfile_bl2=openwrt-mediatek-filogic-netcore_n60-preloader.bin
 386 +bootfile_fip=openwrt-mediatek-filogic-netcore_n60-bl31-uboot.fip
 387 +bootfile_upg=openwrt-mediatek-filogic-netcore_n60-squashfs-sysupgrade.itb
 388 +bootled_pwr=green:status
 389 +bootled_rec=red:status
 390 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 391 +bootmenu_default=0
 392 +bootmenu_delay=0
 393 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )
 394 +bootmenu_0=Initialize environment.=run _firstboot
 395 +bootmenu_0d=Run default boot command.=run boot_default
 396 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 397 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 398 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 399 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 400 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 401 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 402 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 403 +bootmenu_8=Reboot.=reset
 404 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 405 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 406 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 407 +boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 408 +boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 409 +boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 410 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 411 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 412 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 413 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 414 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 415 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 416 +part_default=production
 417 +part_recovery=recovery
 418 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 419 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 420 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 421 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
 422 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 423 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 424 +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 425 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 426 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 427 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 428 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 429 +ethaddr_factory=mtd read factory 0x40080000 0x1fe000 0x1000 && env readmem -b ethaddr 0x40080f20 0x6 ; setenv ethaddr_factory
 430 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 431 +_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
 432 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 433 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"