target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "ASUS RT-AC58U";
  10         compatible = "asus,rt-ac58u";
  11
  12         memory {
  13                 device_type = "memory";
  14                 reg = <0x80000000 0x8000000>;
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22         };
  23
  24         chosen {
  25                 bootargs-append = " ubi.mtd=UBI_DEV";
  26         };
  27
  28         soc {
  29                 rng@22000 {
  30                         status = "okay";
  31                 };
  32
  33                 mdio@90000 {
  34                         status = "okay";
  35                 };
  36
  37                 ess-psgmii@98000 {
  38                         status = "okay";
  39                 };
  40
  41                 tcsr@1949000 {
  42                         compatible = "qcom,tcsr";
  43                         reg = <0x1949000 0x100>;
  44                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  45                 };
  46
  47                 tcsr@194b000 {
  48                         compatible = "qcom,tcsr";
  49                         reg = <0x194b000 0x100>;
  50                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  51                 };
  52
  53                 ess_tcsr@1953000 {
  54                         compatible = "qcom,tcsr";
  55                         reg = <0x1953000 0x1000>;
  56                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  57                 };
  58
  59                 tcsr@1957000 {
  60                         compatible = "qcom,tcsr";
  61                         reg = <0x1957000 0x100>;
  62                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  63                 };
  64
  65                 usb3@8af8800 {
  66                         status = "okay";
  67
  68                         dwc3@8a00000 {
  69                                 #address-cells = <1>;
  70                                 #size-cells = <0>;
  71
  72                                 usb3_port1: port@1 {
  73                                         reg = <1>;
  74                                         #trigger-source-cells = <0>;
  75                                 };
  76                         };
  77                 };
  78
  79                 crypto@8e3a000 {
  80                         status = "okay";
  81                 };
  82
  83                 watchdog@b017000 {
  84                         status = "okay";
  85                 };
  86
  87                 ess-switch@c000000 {
  88                         status = "okay";
  89                 };
  90
  91                 edma@c080000 {
  92                         status = "okay";
  93                 };
  94         };
  95
  96         keys {
  97                 compatible = "gpio-keys";
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_WPS_BUTTON>;
 109                 };
 110         };
 111
 112         leds {
 113                 compatible = "gpio-leds";
 114
 115                 led_power: status {
 116                         label = "rt-ac58u:blue:status";
 117                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 wan {
 121                         label = "rt-ac58u:blue:wan";
 122                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 wlan2G {
 126                         label = "rt-ac58u:blue:wlan2G";
 127                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 128                         linux,default-trigger = "phy0tpt";
 129                 };
 130
 131                 wlan5G {
 132                         label = "rt-ac58u:blue:wlan5G";
 133                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 134                         linux,default-trigger = "phy1tpt";
 135                 };
 136
 137                 usb {
 138                         label = "rt-ac58u:blue:usb";
 139                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 140                         trigger-sources = <&usb3_port1>;
 141                         linux,default-trigger = "usbport";
 142                 };
 143
 144                 lan {
 145                         label = "rt-ac58u:blue:lan";
 146                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 147                 };
 148         };
 149 };
 150
 151 &cryptobam {
 152         status = "okay";
 153 };
 154
 155 &blsp_dma {
 156         status = "okay";
 157 };
 158
 159 &tlmm {
 160         serial_pins: serial_pinmux {
 161                 mux {
 162                         pins = "gpio60", "gpio61";
 163                         function = "blsp_uart0";
 164                         bias-disable;
 165                 };
 166         };
 167
 168         spi_0_pins: spi_0_pinmux {
 169                 mux {
 170                         function = "blsp_spi0";
 171                         pins = "gpio55", "gpio56", "gpio57";
 172                         drive-strength = <12>;
 173                         bias-disable;
 174                 };
 175
 176                 mux_cs {
 177                         function = "gpio";
 178                         pins = "gpio54", "gpio59";
 179                         drive-strength = <2>;
 180                         bias-disable;
 181                         output-high;
 182                 };
 183         };
 184 };
 185
 186 &blsp1_spi1 { /* BLSP1 QUP1 */
 187         pinctrl-0 = <&spi_0_pins>;
 188         pinctrl-names = "default";
 189         status = "okay";
 190         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
 191                    <&tlmm 59 GPIO_ACTIVE_HIGH>;
 192
 193         flash@0 {
 194                 /*
 195                  * U-boot looks for "n25q128a11" node,
 196                  * if we don't have it, it will spit out the following warning:
 197                  * "ipq: fdt fixup unable to find compatible node".
 198                  */
 199                 compatible = "jedec,spi-nor";
 200                 reg = <0>;
 201                 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
 202                 spi-max-frequency = <30000000>;
 203
 204                 partitions {
 205                         compatible = "fixed-partitions";
 206                         #address-cells = <1>;
 207                         #size-cells = <1>;
 208
 209                         partition@0 {
 210                                 label = "SBL1";
 211                                 reg = <0x00000000 0x00040000>;
 212                                 read-only;
 213                         };
 214                         partition@40000 {
 215                                 label = "MIBIB";
 216                                 reg = <0x00040000 0x00020000>;
 217                                 read-only;
 218                         };
 219                         partition@60000 {
 220                                 label = "QSEE";
 221                                 reg = <0x00060000 0x00060000>;
 222                                 read-only;
 223                         };
 224                         partition@c0000 {
 225                                 label = "CDT";
 226                                 reg = <0x000c0000 0x00010000>;
 227                                 read-only;
 228                         };
 229                         partition@d0000 {
 230                                 label = "DDRPARAMS";
 231                                 reg = <0x000d0000 0x00010000>;
 232                                 read-only;
 233                         };
 234                         partition@e0000 {
 235                                 label = "APPSBLENV"; /* uboot env*/
 236                                 reg = <0x000e0000 0x00010000>;
 237                                 read-only;
 238                         };
 239                         partition@f0000 {
 240                                 label = "APPSBL"; /* uboot */
 241                                 reg = <0x000f0000 0x00080000>;
 242                                 read-only;
 243                         };
 244                         partition@170000 {
 245                                 label = "ART";
 246                                 reg = <0x00170000 0x00010000>;
 247                                 read-only;
 248                         };
 249                         /* 0x00180000 - 0x00200000 unused */
 250                 };
 251         };
 252
 253         spi-nand@1 {
 254                 compatible = "spi-nand";
 255                 reg = <1>;
 256                 spi-max-frequency = <30000000>;
 257
 258                 /*
 259                  * U-boot looks for "spinand,mt29f" node,
 260                  * if we don't have it, it will spit out the following warning:
 261                  * "ipq: fdt fixup unable to find compatible node".
 262                  */
 263
 264                 partitions {
 265                         compatible = "fixed-partitions";
 266                         #address-cells = <1>;
 267                         #size-cells = <1>;
 268
 269                         partition@0 {
 270                                 /*
 271                                  * TODO: change to label = "ubi" once we drop 4.14.
 272                                  *       also drop the bootargs-append and all the
 273                                  *       userspace CI_UBIPART="UBI_DEV" remains.
 274                                  */
 275                                 label = "UBI_DEV";
 276                                 reg = <0x00000000 0x08000000>;
 277                         };
 278                 };
 279         };
 280 };
 281
 282 &blsp1_uart1 {
 283         pinctrl-0 = <&serial_pins>;
 284         pinctrl-names = "default";
 285         status = "okay";
 286 };
 287
 288 &usb3_ss_phy {
 289         status = "okay";
 290 };
 291
 292 &usb3_hs_phy {
 293         status = "okay";
 294 };
 295
 296 &wifi0 {
 297         status = "okay";
 298         qcom,ath10k-calibration-variant = "RT-AC58U";
 299 };
 300
 301 &wifi1 {
 302         status = "okay";
 303         qcom,ath10k-calibration-variant = "RT-AC58U";
 304 };